Geochemistry and sequence stratigraphy of regional Upper Cretaceous limestone units, offshore eastern Canada

Hydrocarbons occur in two regional, Upper Cretaceous limestone units—the Turonian-Coniacian Petrel Member, and the Santonian-Maastrichtian Wyandot Formation. The units form important seismic markers beneath the Scotian Shelf and the Grand Banks of Eastern Canada. They mainly consist of bioturbated chalk and minor amounts of calcareous mudstone. A search for source rock using the Δ log R technique showed intervals with source potential, but testing of core and cuttings by Rock-Eval analysis showed no source potential. Three issues are the main cause for the inconsistency: (1) unconsolidated shales that likely included organic material were lost during sample washing; (2) severe contamination by mud additives; and (3) presence of gas. The organic matter found on the shelf has been strongly oxidised, but the distal facies of these limestone units and condensed shale units above and below may yet have potential to form source rock, beyond the studied areas.     

The fall and rise of metropolitan government in Copenhagen

In this paper it is argued that the re-establishment of a metropolitan government in the Greater Copenhagen Area in 2000 (Greater Copenhagen Authority) is not to be seen as a return to the kind of regional, coordinative authority (Greater Copenhagen Council) that was abolished in the Thatcherite climate of the 1980s. Throughout the 1980s and 1990s new forms of urban governance, entrepreneurialism and a higher national priority to the capital region were introduced, which changed the conditions under which the new metropolitan government is operating. This `contextualization' of the analysis of the two generations of metropolitan government points to the fact that typologies of metropolitan government, such as the one put forward by Sharpe (1995), often lacks analytical cogency. This revised version was published online in August 2006 with corrections to the Cover Date.     

Water solubility in orthopyroxene

The solubility of water in pure enstatite was measured on samples synthesized at 1,100 °C and pressures to 100 kbar. Enstatite crystals were grown under water-saturated conditions from a stoichiometric mixture of high-purity SiO₂ and Mg(OH)₂. Water contents were calculated from polarized FTIR spectra measured on oriented single crystals. The water solubility in orthoenstatite increases with pressure to 867ᆷ ppm H₂O by weight at 75 kbar. At 100 kbar, in the stability field of high-clinoenstatite, a water solubility of 714ᆷ ppm was observed. The water solubility in enstatite at 1,100 °C can be described by the equation c_H2O=Af_H2O exp(-P(V/RT), where f_H2O is water fugacity, A=0.0204 ppm/bar and (V=12.3 cm³/mol. The infrared spectra of the hydrous enstatite crystals show a sharp, intense band at 3,363 cm^-1 and a broad, weaker band at 3,064 cm^-1. Both bands are strongly polarized parallel c. Most likely, pairs of protons attached to non-bridging oxygen atoms substitute for Mg²⁺. In order to investigate the effect of chemical impurities on water solubility in enstatite, an additional series of experiments was carried out with gels doped with Al, B, or Li as starting material. Whereas, the presence of Li and B had no detectable effect on water solubility, the addition of about 1 wt% Al₂O₃ increased water solubility in enstatite from 199 to 1,100 ppm at 1,100°C and 15 kbar. In the infrared spectra of these aluminous samples, additional bands occur in the range from 3,450 to 3,650 cm^-1. Similar bands are also observed in natural, aluminous orthopyroxenes and are most likely caused by protons coupled with Al according to the substitution of Al³⁺+H⁺ for Si⁴⁺. A series of hydrous annealing experiments on a natural, gem-quality aluminous enstatite from Tanzania yielded water solubilities generally consistent with the results from the synthetic model systems. The results presented here imply that pure enstatite has a similar storage capacity for water as olivine; however, aluminous orthopyroxenes in the mantle may dissolve much larger amounts of water comparable with the entire mass of the present hydrosphere. Moreover, the mechanism of aluminum substitution in orthopyroxenes, i.e., the distribution of Al between tetrahedral and octahedral sites, may be a potential probe of water fugacity.     

Thermal expansivities of supercooled haplobasaltic liquids

The thermal expansion of supercooled liquids in the haplobasaltic (anorthite-diopside) system have been determined via methods of container-based dilatometry. The expansivity data obtained in this study agree well with estimates provided by previous dilatometric determinations in the system that have relied on alternative experimental strategies. The data have been combined with high-temperature, superliquidus determinations of melt density to obtain expressions for the volume-temperature (V-T) relationships of liquids in the anorthite-diopside system. The V-T data clearly indicate a nonlinear temperature dependence of volume for all melts investigated. The variation is most striking for diopside, where the coefficient of volume thermal expansion decreases ∼56% from temperatures near the glass transition to superliquidus temperatures. With increasing anorthite content, the degree of variation appears to decrease. An₄₂Di₅₈ exhibits a decrease of 39% of its coefficient of thermal expansion and An₉₈Di₀₂ of 33%, respectively. The expansivities obtained in this study cannot be reproduced by means of published models that are based on linear V-T relationships. They require instead a reanalysis of existing pressure-V-T equations of state models for silicate melts.     

Wave velocities and attenuation of shaley sandstones as a function of pore pressure and partial saturation

We obtain the wave velocities and quality factors of clay‐bearing sandstones as a function of pore pressure, frequency and partial saturation. The model is based on a Biot‐type three‐phase theory that considers the coexistence of two solids (sand grains and clay particles) and a fluid mixture. Additional attenuation is described with the constant‐Q model and viscodynamic functions to model the high‐frequency behaviour. We apply a uniform gas/fluid mixing law that satisfies the Wood and Voigt averages at low and high frequencies, respectively. Pressure effects are accounted for by using an effective stress law. By fitting a permeability model of the Kozeny– Carman type to core data, the model is able to predict wave velocity and attenuation from seismic to ultrasonic frequencies, including the effects of partial saturation. Testing of the model with laboratory data shows good agreement between predictions and measurements.     

A quantitative investigation into the temporal and spatial variations in the emergence of adult blackflies (Diptera: Simuliidae) from the Breitenbach, a small upland stream in Germany

As a contribution to the long-term emergence studies carried out as part of the “Breitenbach ecosystem project”, this paper presents the results obtained on emergence patterns and population dynamics of blackflies from 1984 to 1988. The Breitenbach is a small first order stream near Schlitz/Hesse, running into the Fulda river. Adult blackflies were caught in 4 greenhouse emergence traps, each spanning the whole width of the stream for a length of 6 m. A manual and then a partly automated method for collecting trapped insects was applied for three years and one year, respectively. Sixteen blackfly-species of different origin were found in the traps: a) autochthonous species: Prosimulium tomosvaryi, Simulium vernum s.l., S. cryophilum s.l., S. ornatum s.l. (common); S. costatum, S. trifasciatum, S. monticola, S. argyreatum (rare); b) species of doubtful origin: S. lundstromi, S. angustitarse, S. angustipes, S. aureum (very rare); c) allochthonous species: S. lineatum, S. equinum, S. erythrocephalum, S. noelleri. It was shown that the last 4 species had not emerged from the Breitenbach but had flown into the traps as adults. In addition, females of autochthonous species with blood or with mature eggs were trapped, which were also considered to have flown in. Besides revealing a limitation of the trap construction, they supported the detailed interpretation of some intricated patterns of appearance. Variations in emergence patterns and specimen numbers between years and traps were pronounced, but only in a few cases could they be attributed to changes in abiotic factors such as water temperature or discharge. P. tomosvaryi had the most simple and regular life cycle, with one well synchronised emergence peak annually from April to May (or even to June). No gradient of specimen numbers along the stream was evident. The two closely related species S. vernum and S. cryophilum had quite similar emergence patterns: There were two broad peaks per year, extending mainly from March to June and from July to October or November. In some cases the number and separation of consecutive generations was not clear. The abundance of both species clearly decreased downstream, more so for S. cryophilum than for S. vernum. In a trap closest to a tributary spring, S. cryophilum was the dominant species during three of the four years examined. The adults of S. ornatum displayed an intricate pattern of appearance, with very low specimen numbers in spring and medium to very high numbers in July/August and September/October. S. ornatum is the only blackfly species that inhabits both the Breitenbach and the adjacent section of the Fulda river. It was shown that females emerging from the Fulda river regularly invade the Breitenbach valley in greatly varying numbers and oviposit there. This leads to overlapping larval cohorts with corresponding emergence peaks. Although S. ornatum was the most abundant species in one year in the lower traps (60 to 80% of all individuals), it remains uncertain whether it is a long-term, permanent member of the autochthonous blackfly fauna of the Breitenbach. Estimates of total numbers of flown-in adults, actual emergence, dry weight biomass, the ecological separation of the species and their life cycle strategies are discussed.     

Contrasting rifted margin styles south of Greenland: implications for mantle plume dynamics

We present new and reprocessed seismic reflection data from the area where the southeast and southwest Greenland margins intersected to form a triple junction south of Greenland in the early Tertiary. During breakup at 56 Ma, thick igneous crust was accreted along the entire 1300-km-long southeast Greenland margin from the Greenland Iceland Ridge to, and possibly 100 km beyond, the triple junction into the Labrador Sea. However, highly extended and thin crust 250 km to the west of the triple junction suggests that magmatically starved crustal formation occurred on the southwest Greenland margin at the same time. Thus, a transition from a volcanic to a non-volcanic margin over only 100–200 km is observed. Magmatism related to the impact of the Iceland plume below the North Atlantic around 61 Ma is known from central-west and southeast Greenland. The new seismic data also suggest the presence of a small volcanic plateau of similar age close to the triple junction. The extent of initial plume-related volcanism inferred from these observations is explained by a model of lateral flow of plume material that is guided by relief at the base of the lithosphere. Plume mantle is channelled to great distances provided that significant melting does not take place. Melting causes cooling and dehydration of the plume mantle. The associated viscosity increase acts against lateral flow and restricts plume material to its point of entry into an actively spreading rift. We further suggest that thick Archaean lithosphere blocked direct flow of plume material into the magma-starved southwest Greenland margin while the plume was free to flow into the central west and east Greenland margins. The model is consistent with a plume layer that is only moderately hotter, 100–200°C, than ambient mantle temperature, and has a thickness comparable to lithospheric thickness variations, 50–100 km. Lithospheric architecture, the timing of continental rifting and viscosity changes due to melting of the plume material are therefore critical parameters for understanding the distribution of magmatism.     

Deflation during caldera unrest: constraints on subsurface processes and hazard prediction from gravity–height data

We have evaluated published gravity-height ((g/(h) data on Campi Flegrei, Kilauea, Askja and Krafla, in order to discriminate between subsurface processes during caldera subsidence. With respect to end member gravity-height correlations, such as the free air gradient (FAG) and the Bouguer corrected free air (BCFAG), (g/(h gradients must be interpreted in terms of subsurface mass redistribution, density changes or some combination of these. (g/(h gradients during subsidence plot (1) along or below the BCFAG, (2) between the BCFAG and the FAG or (3) along or above the FAG. We have evaluated each of these three regions in terms of subsurface processes during volcano subsidence. We have interpreted (g/(h gradients as possible indicators of precursors of volcanic activity and propose that gravity-height surveys may help to detect precursors of caldera collapse caused by magma drainage. In this context, the 1875 eruption of Askja in Iceland has been re-interpreted in terms of the beginning of the eruptive episode being induced by roof collapse of an evacuating magma chamber. Based on other examples of recent volcanic roof collapses, we evaluate the contribution of gravity-height surveys in assessing volcanic risks during caldera subsidence. Caldera-forming eruptions are environmentally and economically the most devastating volcanic events. Inflation is usually considered to be an important precursor to activity. Here, we show that deflation may be associated with the trigger mechanism for caldera-forming explosive eruptions.     

Methodology for construction, calibration and validation of a national hydrological model for Denmark

An integrated groundwater/surface water hydrological model with a 1 km² grid has been constructed for Denmark covering 43,000 km². The model is composed of a relatively simple root zone component for estimating the net precipitation, a comprehensive three-dimensional groundwater component for estimating recharge to and hydraulic heads in different geological layers, and a river component for streamflow routing and calculating stream–aquifer interaction. The model was constructed on the basis of the MIKE SHE code and by utilising comprehensive national databases on geology, soil, topography, river systems, climate and hydrology. The present paper describes the modelling process for the 7330 km² island of Sjælland with emphasis on the problems experienced in combining the classical paradigms of groundwater modelling, such as inverse modelling of steady-state conditions, and catchment modelling, focussing on dynamic conditions and discharge simulation. Three model versions with different assumptions on input data and parameter values were required until the performance of the final, according to pre-defined accuracy criteria, model was evaluated as being satisfactory. The paper highlights the methodological issues related to establishment of performance criteria, parameterisation and assessment of parameter values from field data, calibration and validation test schemes. Most of the parameter values were assessed directly from field data, while about 10 ‘free’ parameters were subject to calibration using a combination of inverse steady-state groundwater modelling and manual trial-and-error dynamic groundwater/surface water modelling. Emphasising the importance of tests against independent data, the validation schemes included combinations of split-sample tests (another period) and proxy-basin tests (another area).     

The BEAM-project: prediction and assessment of mixture toxicities in the aquatic environment

Freshwater and marine ecosystems are exposed to various multi-component mixtures of pollutants. Nevertheless, most ecotoxicological research and chemicals regulation focus on hazard and exposure assessment of individual substances only, the problem of chemical mixtures in the environment is ignored to a large extent. In contrast, the assessment of combination effects has a long tradition in pharmacology, where mixtures of chemicals are specifically designed to develop new products, e.g. human and veterinary drugs or agricultural and non-agricultural pesticides. In this area, two concepts are frequently used and are thought to describe fundamental relationships between single substance and mixture effects: Independent Action (Response Addition) and Concentration Addition. The question, to what extent these concepts may also be applied in an ecotoxicological and regulatory context may be considered a research topic of major importance, as the concepts would allow to make use of already existing single substance toxicity data for the predictive assessment of mixture toxicities. Two critical knowledge gaps are identified: (a) There is a lack of environmental realism, as a huge part of our current knowledge about the applicability of the concepts is restricted to artificial situations with respect to mixture composition or biological effect assessment. (b) The knowledge on what exactly is needed for using the concepts as tools for the predictive mixture toxicity assessment is insufficient. Both gaps seriously hamper the necessary, scientifically sound consideration of mixture toxicities in a regulatory context.In this paper, the two concepts will be briefly introduced, the necessity of considering the toxicities of chemical mixtures in the environment will be demonstrated and the applicability of Independent Action and Concentration Addition as tools for the prediction and assessment of mixture toxicities will be discussed. An overview of the specific aims and approaches of the BEAM project to fill in the identified knowledge gaps is given and first results are outlined.