Performance of surface footing on geocell-reinforced soft clay beds

This paper presents the results of laboratory model tests carried out to develop an understanding of the behaviour of geocell-reinforced soft clay foundations under circular loading. Natural silty clay was used in this study. The geocells were prepared using biaxial polymer grid. The performance of the reinforced bed is quantified using non-dimensional factors i.e., Bearing capacity improvement factor (I_f) and Percentage reduction in footing settlement (PRS). The test results demonstrate that the geocell mattress redistributes the footing load over a wider area thereby improving the performance of the footing. The load carrying capacity of the clay bed is increased by a factor of up to about 4.5 times that of unreinforced bed. From the pressure-settlement responses, it is observed that the geocell-reinforced foundation bed behaves as a much stiffer system compared to the unreinforced case indicating that a substantial reduction in footing settlement can be achieved by providing geocell reinforcement in the soft clay bed. The maximum reduction in footing settlement obtained with the provision of geocell mattress of optimum size placed close to the footing is around 90%. Further improvement in performance is obtained with provision of an additional planar geogrid layer at the base of the geocell mattress.     

Adsorption characteristics of perchloroethylene in natural sandy materials with low organic carbon content

Laboratory batch tests were conducted to investigate the sorption isotherms and sorption kinetics of the chlorinated hydrocarbon perchloroethylene (PCE) in five natural sandy materials with an organic carbon content (f _oc) in the range 0.080–0.540%. The amended non-linear dual-mode model can describe the sorption isotherms in materials with f _oc in the range 0.080–0.090%. For a sample with a much higher f _oc of 0.54%, the absorption isotherm was found to fit a linear model. These results may indicate that organic carbon is not the main factor influencing the sorption isotherm. The sorption kinetics of PCE in samples with f _oc in the range 0.080–0.090% are not first-order and are different from those observed in the samples with higher f _oc. The sorption process in the materials with lower f _oc involves fast sorption, fast desorption and an equilibrium stage. The results may imply that the factors affecting sorption kinetics of PCE in low f _oc media are pore filling and capillary condensation rather than organic carbon content.     

Spatial pattern of Karst rock desertification in the Middle of Guizhou Province,Southwestern China

Karst rocky desertification is a typical type of land degradation in the Southwestern China. It has great ecological and economical implications for the local people. Landsat images from the middle of Guizhou Province collected in 1974, 1993 and 2001 were used for change detection of the pattern of Karst rocky desertification. The results show the following findings: (1) Desertification area expanded drastically in 27 years, at an increasing rate about 116.2 km²/year. (2) High areas (900–1,500 m) are the most affected. (3) Areas with the slope <5° or >25° are also easily tend to be Karst rocky deserted. (4) The process of Karst rocky desertification is nearly irreversible. Few areas of Karst rocky desertification could be meliorated to non-desertification land. (5) Most of the degraded lands are located in the south and the central of the study region, and the meliorated land areas are sparsely located in the east and the west part of the region. All these findings would provide bases for the decision-making of the local government to improve the Karst rocky desertification     

Geochemistry of Flooded Underground Mine Workings Influenced by Bacterial Sulfate Reduction

Unlike the majority of the water in the flooded mine complex of Butte Montana, which includes the highly acidic Berkeley pit lake, groundwater in the flooded West Camp underground mine workings has a circum-neutral pH and contains at least 8 μM aqueous sulfide. This article examines the geochemistry and stable isotope composition of this unusual H₂S-rich mine water, and also discusses problems related to the colorimetric analysis of sulfide in waters that contain FeS_(aq) cluster compounds. The West Camp mine pool is maintained at a constant elevation by continuous pumping, with discharge water that contains elevated Mn (90 μM), Fe (16 μM), and As (1.3 μM) but otherwise low metal concentrations. Dissolved inorganic carbon in the mine water is in chemical and isotopic equilibrium with rhodochrosite in the mineralized veins. The mine water is under-saturated with mackinawite and amorphous FeS, but is supersaturated with Cu- and Zn-sulfides. However, voltammetry studies show that much of the dissolved sulfide and ferrous iron are present as FeS_(aq) cluster molecules: as a result, the free concentration of the West Camp water is poorly constrained. Concentrations of dissolved sulfide determined by colorimetry were lower than gravimetric assays obtained by AgNO₃ addition, implying that the FeS_(aq) clusters are not completely extracted by the Methylene Blue reagent. In contrast, the clusters are quantitatively extracted as Ag₂S after addition of AgNO₃. Isotopic analysis of co-existing aqueous sulfide and sulfate confirms that the sulfide was produced by sulfate-reducing bacteria (SRB). The H₂S-rich mine water is not confined to the immediate vicinity of the extraction well, but is also present in flooded mine shafts up to 3 km away, and in samples bailed from mine shafts at depths up to 300 m below static water level. This illustrates that SRB are well established throughout the southwestern portion of the extensive (>15 km³) Butte flooded mine complex.     

Pervasive melt percolation reactions in ultra-depleted refractory harzburgites at the Mid-Atlantic Ridge, 15° 20′N: ODP Hole 1274A

ODP Leg 209 Site 1274 mantle peridotites are highly refractory in terms of lack of residual clinopyroxene, olivine Mg# (up to 0.92) and spinel Cr# (∼0.5), suggesting high degree of partial melting (>20%). Detailed studies of their microstructures show that they have extensively reacted with a pervading intergranular melt prior to cooling in the lithosphere, leading to crystallization of olivine, clinopyroxene and spinel at the expense of orthopyroxene. The least reacted harzburgites are too rich in orthopyroxene to be simple residues of low-pressure (spinel field) partial melting. Cu-rich sulfides that precipitated with the clinopyroxenes indicate that the intergranular melt was generated by no more than 12% melting of a MORB mantle or by more extensive melting of a clinopyroxene-rich lithology. Rare olivine-rich lherzolitic domains, characterized by relics of coarse clinopyroxenes intergrown with magmatic sulfides, support the second interpretation. Further, coarse and intergranular clinopyroxenes are highly depleted in REE, Zr and Ti. A two-stage partial melting/melt–rock reaction history is proposed, in which initial mantle underwent depletion and refertilization after an earlier high pressure (garnet field) melting event before upwelling and remelting beneath the present-day ridge. The ultra-depleted compositions were acquired through melt re-equilibration with residual harzburgites. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Archaean high-K granitoids produced by remelting of earlier Tonalite–Trondhjemite–Granodiorite (TTG) in the Sangmelima region of the Ntem complex of the Congo craton,southern Cameroon

We present a geochemical and isotopic study that, consistent with observed field relations, suggest Sangmelima late Archaean high-K granite was derived by partial melting of older Archaean TTG. The TTG formations are sodic-trondhjemitic, showing calcic and calc-alkalic trends and are metaluminous to peraluminous. High-K granites in contrast show a potassic calc-alkaline affinity that spans the calcic, calc-alkalic, alkali-calcic and alkalic compositions. The two rock groups (TTG and high-K granites) on the other hand are both ferroan and magnesian. They have a similar degree of fractionation for LREE but a different one for HREE. Nd model ages and Sr/Y ratios define Mesoarchaean and slab-mantle derived magma compositions respectively, with Nb and Ti anomalies indicating a subduction setting for the TTG. Major and trace element in addition to Sr and Nd isotopic compositions support field observations that indicate the derivation of the high-K granitic group from the partial melting of the older TTG equivalent at depth. Geochemical characteristics of the high-K granitic group are therefore inherited features from the TTG protolith and cannot be used for determining their tectonic setting. The heat budget required for TTG partial melting is ascribed to the upwelling of the mantle marked by a doleritic event of identical age as the generated high-K granite melts. The cause of this upwelling is related to linear delamination along mega-shear zones in an intracontinental setting.     

Lithosphere formation in the central Slave Craton (Canada): plume subcretion or lithosphere accretion?

Major-element compositions of minerals in peridotite xenoliths from the Lac de Gras kimberlites provide constraints on the mode of lithosphere formation beneath the central Slave Craton, Canada. Magnesia contents of reconstructed whole rocks correlate positively with NiO and negatively with CaO contents, consistent with variable partial melt extraction. Alumina and Cr₂O₃ contents are broadly positively correlated, suggestive of melt depletion in the absence of a Cr–Al phase. Garnet modes are high at a given Al₂O₃ content (a proxy for melt depletion), falling about a 7 GPa melt depletion model. These observations, combined with high olivine Mg# and major-element relationships of FeO-poor peridotites (<7.5 wt%) indicative of melt loss at pressures >3 GPa (residual FeO content being a sensitive indicator of melt extraction pressure), and similar high pressures of last equilibration (∼4.2 to 5.8 GPa), provide multiple lines of evidence that the mantle beneath the central Slave Craton has originated as a residue from high-pressure melting, possibly during plume subcretion. Apparent low melt depletion pressures for high-FeO peridotites (>7.5 wt%) could suggest formation in an oceanic setting, followed by subduction to their depth of entrainment. However, these rocks, which are characterised by low SiO₂ contents (<43 wt%), are more likely to be the result of post-melting FeO-addition, leading to spuriously low estimates of melt extraction pressures. They may have reacted with a silica-undersaturated melt that dissolved orthopyroxene, or experienced olivine injection by crystallising melts. A secular FeO-enrichment of parts of the deep mantle lithosphere is supported by lower average Mg# in xenolithic olivine (91.7) compared to olivine inclusions in diamond (92.6).     

The light transmission and seiche depth of Izmir Bay,western Turkey

Izmir Bay is one of the most polluted estuaries in the whole Mediterranean Sea. The inner part of the Bay (Inner Bay) is heavily affected by domestic and industrial discharge. As a result of these loads, strong eutrophication occurs in the Inner Bay, which is temporally anaerobic. The ecologically sensitive approach of the local authorities during the last decade has given rise to a wide variety of monitoring and research studies on this bay. On the other hand, the municipality of Izmir started to operate wastewater treatment facilities since January 2000. The Institute of Marine Sciences and Technology — Izmir (IMST) with its research vessel R/V K Piri Reis has been conducting an intensive monitoring program since 1988 and especially during the recent few years. These investigations provide an opportunity for the evaluation of the performance of the wastewater treatment plant in terms of the change in the optical properties of Izmir Bay water in a positive manner. The turbidity values measured in these monitoring studies indicate that the values have changed drastically after January 2000. Their spatial variation indicates that the values decrease from the Inner Bay towards the Aegean Sea. The turbidity (light transmission) values are measured with an automatic CTD (conductivity, temperature and depth) system during each cruise. The seiche disc depth measurement is carried out only occasionally. The accuracy of the seiche disc depth is dependent on certain daylight conditions and depends on the operator. The seiche disc depth (D _s) is an important parameter to estimate primary production of organic matter (hereafter called production). A relation between light transmission (turbidity) value and seiche disc depth (D _s) is found with very good agreement. The correlations are very high (approximately 0.94) with slight seasonal variation.     

Damage investigation of girder bridges under the Wenchuan earthquake and corresponding seismic design recommendations

An investigation of girder bridges on National Highway 213 and the Doujiangyan-Wenchuan expressway after the Wenchuan earthquake showed that typical types of damage included： span collapses due to unseating at expansion joints; shear key failure; and damage of the expansion joint due to the slide-induced large relative displacement between the bottom of the girder and the top of the laminated-rubber bearing. This slide, however, can actually act as a form of isolation for the substructure, and as a result, the piers and foundation of most of the bridges on state route 213 suffered minor damage. The exception was the Baihua Bridge, which suffered severe damage. Corresponding seismic design recommendations are presented based on this investigation.