新疆天山地区地貌分形与多重分形特征研究

利用投影覆盖法和投影覆盖概率对新疆天山地区不同构造地貌类型进行了分形与多重分形特征的研究。结果表明：在所研究的标度范围内，不同地貌区均表现出明显的多度域分形，分维值总体上呈现出高山区＞中低山区＞盆地区特点，多重分形谱Dq的形态和值域范围也表现出不同特征。研究认为，地貌表面的分维值与地貌形成的内外力地质作用方式和强度密切相关，并提出5-6km的尺度可作为地貌学研究中宏观与微观作用的分界点。     

邛崃4.5级地震与震后趋势判断

邛崃地震发生后，成都市地震局很快做出反应，及时开展了地震考察并做出了正确的震后趋势判断，取得了较好的社会效益。     

第四纪沉积物天然热释光测量方法技术研究——山东草桥油田研究实例

第四纪沉积物天然热释光测量是一种累积间接油气勘查新方法。文中给出了首次系统研究的成果 ,从数百个样品中总结出的适用油气勘探的预热线形升温、恒温最佳加热程序 ,升温速率以 β=6℃ /s为宜 ,恒温温度 40 0℃ ,40 0℃恒温时间为 12s。在沉积物辐射剂量响应及日光晒退实验数据的基础上 ,总结了样品采集、预处理及测量方法。通过对山东草桥油田第四纪沉积物天然热释光与游离气烃野外实测资料的分析 ,发现天然热释光异常与气烃异常完全吻合 ,在油水边界上方 ,热释光、甲烷、乙烷出现高值异常 ,油田上方是低值带 ,为串珠状异常模式。热释光最大值为 2 0 4.2 μGy ,平均值为 79.45μGy ,标准差为 3 4 .14 μGy ;甲烷浓度异常下限为 2 5μL/L ,乙烷浓度异常下限为 4.4μL/L。     

Study of crustal structure with S—wave data from Maqen—Jingbian profile

2-D crustal velocity structure and vp/vs are obtained by processing and interpretation of S-wave data from Maqen-Jingbian deep seismic sounding(DSS)profile.The result shows that there exist obvious differences in 2-D S-wave velocity structure and vp/vs ratio structure along the profile.The S-wave velocities are low and vp/vs ration is high for the westem section of the profile and Haiyuan region,while they are normal for the middle and eastern sections.The changes in lithologic characters of two major anomalous zones are discussed according to lateral variation of S-wave velocity structure and vp/vs ratio structure.It is concluded that the development and occurrence of the Haiyuan strong earthquake is not only related to tectonic activities,but also to lithologic characters of the region.     

Crustal structure beneath the Songpan—Garze orogenic belt

The Benzilan-Tangke deepseismic sounding profile in the western Sichuan region passes through the Song-pan-Garze orogenic belt with trend of NNE.Based on the travel times and the related amplitudes of phases in the record sections,the 2-D P-wave crustal structure was ascertained in this paper.The velocity structure has quite strong lateral variation along the profile.The crust is divided into 5layers,where the first,second and third layer belong to the upper crust,the forth and fifth layer belong to the lower crust.The low velocity anomaly zone gener-ally exists in the central part of the upper crust on the profile,and it integrates into the overlying low velocity basement in the area to the north of Ma‘erkang.The crustal structure in the section can be divided into 4parts:in the south of Garze-litang fault,between Garze-Litang fault and Xianshuihe fault,between Xianshuihe fault and Longriba fault and in the north of Longriba fault,which are basically coincided with the regional tectonics division.The crustal thickness decreases from southwest to northeast along the profile,that is ,from62km in the region of the Jinshajiang River to 52km in the region of the Yellow River.The Moho discontinuity does not obviously change across the Xianshuihe fault basesd on the PmP phase analysis.The crustal average velocity along the profile is lower,about 6.30 km/s.The Benzilan-Tangke profile reveals that the crust in the study area is orogenic.The Xianshuihe fault belt is located in the central part of the profile,and the velocity is positive anomaly on the upper crust,and negative anomaly on the lower crust and upper mantle.It is considered as a deep tectonhic setting in favor of strong earthquake‘s accumulation and occurrence.     

Exploration and Study on Deep Crust Structural Characteristics in the Jiashi-Artux Seismic Region

The data from two deep seismic sounding profiles was processed and studied comprehensively. The results show that crnst-mantle structures in the investigated region obviously display layered characteristics and velocity structures and tectonic features have larger distinction in different geological structure blocks. The boundary interface C between the upper and lower crust and Moho fluctuate greatly. The shallowest depths of C (30.0km) and Moho (45.5km) under Jiashi deepen sharply from Jiashi to the western Kunlun mountain areas, where the depths of C and Moho are 44.0km and 70.0km, respectively. The higher velocity structures in the Tarim massif determine its relatively “stable“ characteristics in crust tectonics. The phenomenon in the Jiashi region, where the distribution of earthquake foci mostly range from 20kin to 40kin in depth, may infer that the local uplift of C and Moho interface, anomalonsly lower velocity bodies and deep large faults control earthquake occurrence and seismogenic processes in the Jiashi strong earthquake swarm.     

Contemporary crustal deformation of the Chinese continent and tectonic block model

We obtain the preliminary result of crustal deformation velocity field for the Chinese continent by analyzing GPS data from the Crustal Motion Observation Network of China (CMONOC), particularly the data from the regional networks of CMONOC observed in 1999 and 2001. We delineate 9 technically active blocks and 2 broadly distributed deformation zones out of a dense GPS velocity field, and derive block motion Euler poles for the blocks and their relative motion rates. Our result reveals that there are 3 categories of deformation patterns in the Chinese continent. The first category, associated with the interior of the Tibetan Plateau and the Tianshan orogenic belt, shows broadly distributed deformation within the regions. The third category, associated with the Tarim Basin and the region east of the north-south seismic belt of China, shows block-like motion, with deformation accommodated along the block boundaries only. The second category, mainly associated with the borderland of the Tibetan Plateau, such as the Qaidam, Qilian, Xining (in eastern Qinghai), and the Diamond-shaped (in western Sichuan and Yunnan) blocks, has the deformation pattern between the first and the third, i.e. these regions appear to deform block-like, but with smaller sizes and less strength for the blocks. Based on the analysis of the lithospheric structures and the deformation patterns of the regions above, we come to the inference that the deformation modes of the Chinese continental crust are mainly controlled by the crustal structure. The crust of the eastern China and the Tarim Basin is mechanically strong, and its deformation takes the form of relative motion between rigid blocks. On the other hand, the northward indentation of the Indian plate into the Asia continent has created the uplift of the Tibetan Plateau and the Tianshan Mountains, thickened their crust, and raised the temperature in the crust. The lower crust thus has become ductile, evidenced in low seismic velocity and high electric conductivity observed. The brittle part of the crust, driven by the visco-plastic flow of the lower crust, deforms extensively at all scales. The regions of the second category located at the borderland of the Tibetan Plateau are at the transition zone between the regions of the first and the third categories in terms of the crustal structure. Driven by the lateral boundary forces, their deformation style is also between the two, in the form of block motion and deformation with smaller blocks and less internal strength.     

时频测控技术的发展

目前，在所有的物理量中时间与频率标准的物理实现具有最高的准确度和稳定度，它们的发展不但在计量技术中，而且在几乎整个高科技领域中起着十分重要的作用。这方面的发展一直受到发达国家的高度重视。根据近年来与国外同行的技术交流和了解的情况，对时频测控技术的发展和影响等作了介绍。     

STRUCTURAL CHARACTERISTICS OF THE NIUSHOU MOUNTAIN AND ITS GEOLOGICAL SIGNIFICANCE IN CENTRAL NINGXIA

There are many thrust-related structures occurring in the Paleozoic strata of the Niushou Mountain in the central part of Ningxia Hui Autonomous Region. The fault-related folds are the typical structures in this area. Based on the analysis about these structures and their relationships, the processes by which these structures of the Miboshan Formation were formed are reconstructed, and the strata underwent about three stages of deformation: (1) horizontal shortening, (2) folding, and (3) thrusting. And the fact that the Niushou Mountain is the leading edge of an old thrust sheet was proved, the Niushou Mountain, the Daluo Mountain and the Xiaoluo Mountain together constitute the front part of this old thrust zone, so the Niushou Mountain and the Ordovician strata in the central and southern parts of Ningxia now are likely allochthons. In the period from middle Ordovician to Devonian, the areas of the central and southern Ningxia belonged to the back-arc foreland basin of North Qilianshan orogen, which was adjacent to the continent in the north. In the later part of the early Paleozoic period, the Niushou Mountain was formed after the closure of the back-arc foreland basin.     

Surface analysis of pyrite in the No. 9 coal seam, Wuda Coalfield, Inner Mongolia, China, using high-resolution time-of-flight secondary ion mass-spectrometry

The chemical composition of pyrite in coal can be used to investigate its geological and mineralogical origin. In this paper, high-resolution time-of-flight secondary ion mass spectrometry (TOF-SIMS) was used to study the chemical composition of various pyrite forms in the No. 9 coal seam (S_t,d=3.46%) from the Wuda Coalfield, Inner Mongolia, northern China. These include bacteriogenic, framboidal, massive, cell-filling, fracture-filling, and nodular pyrites. In addition to Fe⁺ (⁵⁴Fe⁺, ⁵⁶Fe⁺, ⁵⁷Fe⁺), other fragment ions were detected in bacteriogenic pyrites, such as ²⁷Al⁺, Si⁺ (²⁸Si⁺, ²⁹Si⁺, ³⁰Si⁺), ⁴⁰Ca⁺, Cu⁺ (⁶³Cu⁺, ⁶⁵Cu⁺), Zn⁺ (⁶⁴Zn⁺, ⁶⁶Zn⁺, ⁶⁷Zn⁺, ⁶⁸Zn⁺), Ni⁺ (⁵⁸Ni⁺, ⁶⁰Ni⁺, ⁶²Ni⁺), and C₃H₇⁺. TOF-SIMS images show bacteriogenic pyrites are relatively rich in Cu, Zn, and Ni, suggesting that bacteria probably play an important role in the enrichment of Cu, Zn, and Ni during their formation. Intense positive secondary ion fragments from framboidal aggregates, such as ²⁷Al⁺, ²⁸Si⁺, ²⁹Si⁺, AlO⁺, CH₂⁺, C₃H₃⁺, C₃H₅⁺, and C₄H₇⁺, indicate that formation of the framboidal aggregates may have occurred together with clay mineral and organic matter, which probably serve as the binding substance. The intense ions of ²⁸Si⁺ and ²⁷Al⁺ from massive pyrites also suggest that their pores incorporated clay minerals during crystallization. Together with the lowest ²⁸Si⁺/²³Na⁺ value, the intense organic positive secondary ion peaks from cell-filling pyrites, such as C₃H₃⁺, C₃H₅⁺, C₃H₇⁺, and C₄H₇⁺, indicate that pyrite formation may have accompanied dissolution or disintegration of the cell. The intense P⁺ peak was observed only in the fracture-filling pyrite and the highest ²⁸Si⁺/²³Na⁺ value of fracture-filling pyrite reflects its epigenetic origin. Together with XRD and REEs data, the stronger ⁴⁰Ca⁺ in nodular pyrite than other pyrite forms shows seawater influence during its formation.