Analogue study of particle segregation in pyroclastic density currents, with implications for the emplacement mechanisms of large ignimbrites

Abstract Analogue flume experiments were conducted to investigate the transport and sedimentation behaviour of turbulent pyroclastic density currents. The experimental currents were scaled approximately to the natural environment in three ways: (1) they were fully turbulent; (2) they had a very wide range of particle sizes and associated Rouse numbers (the ratio of particle settling velocity to effective turbulent eddy velocity in the current); and (3) they contained particles of two different densities. Two sets of surge‐type experiments were conducted in a 5 m long, water‐filled lock‐exchange flume at five different volumetric particle concentrations from 0·6% to 23%. In one set (one‐component experiments), the currents contained just dense particles; in the other set (two‐component experiments), they contained both light and dense particles in equal volume proportions. In both sets of experiments, the population of each component had a log‐normal size distribution. In the two‐component experiments, the size range of the light particle population was selected in order to be in hydrodynamic equivalence with that of the dense particles. Dense particles were normally graded, both vertically and downstream, in the deposits from both sets of experiments. The mass loading (normalized to the initial mass of the suspension) and grain size of the dense component in the deposits decreased with distance from the reservoir and were insensitive to initial total particle concentration in the currents. On the other hand, in the two‐component experiments, the light particles were extremely sensitive to concentration. They were deposited in hydrodynamic equivalence with the dense particles from dilute currents, but were segregated efficiently at concentrations higher than a few per cent. With increasing particle concentration, the large, light particles were carried progressively further down the flume because of buoyancy effects. Deposits from the high‐concentration currents exhibited reverse vertical grading of the large, light particles. Efficient segregation of the light component was observed even if the bulk density of the current was less than that of the light particles. In both sets of experiments, marked inflexions in the rate of downstream decline in mass loading and maximum grain size of the dense component can be attributed to the presence of two different particle settling regimes in the flow: (1) particles with Rouse numbers >2·5, which did not respond to the turbulence and settled rapidly; and (2) particles with Rouse numbers <2·5, which followed the turbulent eddies and settled slowly. The results are applied to the transport and sedimentation dynamics of pyroclastic density currents that generate large, widespread ignimbrites. Field data fail to reveal significant departures from aerodynamic equivalence between pumice and lithic clasts in three such ignimbrites: the particulate loads of some large ignimbrites are transported principally in turbulent suspensions of low concentration. In some ignimbrites, the well‐developed inflexions in curves of maximum lithic (ML) size vs. distance can be attributed to the existence of distinct high and low Rouse number particle settling regimes that mark the transition from an overcharged state to one in which the residual particulate load is transported more effectively by turbulence.     

Geochronology,Geochemistry and Petrogenesis of the Pungco Ophiolite,TibetEI北大核心CSCD

Although the middle section of the Bangong-Nujiang suture zone has been intensively investigated, its tectonic framework and evolution is still controversy. The Pungco ophiolite has a relative complete ophiolitic complex, which is an ideal specimen for studying this tricky problem. LA-ICP-MS U-Pb dating of zircons from the diabasic rock yielded an age of 159.0±2.1 Ma. This age suggests that the Pungco ophiolite was formed in the Late Jurassic, indicating the development of the Late Jurassic ophiolite in the third ophiolitic subzone. The whole-rock major and trace element compositions of diabasic and basaltic rocks exhibit mixed arc and N-MORB geochemical characteristics. Two diabasic samples have (87Sr/86Sr)i values of 0.7055 and 0.7063 and εNd(t) values of 11.28 and 11.84, respectively. The geochemical signatures and formation age of the Pungco ophiolite suggest that this ophiolite was probably produced in an active continental fore-arc setting. It originated from a N-MORB-like depleted mantle source with the involvement of subducted-slab fluids. Considering the regional geological background, the Pungco ophiolite was likely generated during the southward subduction of the Bangong-Nujiang Tethyan oceanic lithosphere beneath the Lhasa terrane, and belongs to a regional archipelagic arc-basin system together with the other Early Jurassic-Early Cretaceous ophiolites from the northern Tibet Lake district. © 2018, Science Press. All right reserved.     

Discovery of Pyrrhotite-Chalcopyrite-Bearing Amphibole Megacrysts in Tongling Area, Anhui Province

Some pyrrhotite-chalcopyrite-bearing amphibole megacrysts (including pyroxene megacrysts) were discovered in Mesozoic augite diorite-porphyrite at Caoshan in Tongling area, Anhui Province. The amphibole megacrysts, belonging mainly to pargasite and magnesiohastingsite, are characteristic of the amphibole composition derived from mantle and crystallized in lower crust. In general, the aggregates of pyrrhotite-chalcopyrite take the shapes of cylinder and sphere. Three occurrences have been recognized in the amphibole megacrysts: parallel linear, bunchy and scattered. The unique cylinder-like shape of the aggregates and remarkable Ni-poor sulfides in Caoshan are distinctively different from the spherical Ni-rich sulfides in pyroxene megacrysts and any other kinds of megacrysts. In terms of composition, the amphibole megacrysts and their sulfides in Caoshan are similar to those in the pyroxenite xenoliths in Qilin, Guangdong Province. In terms of origin, the pyrrhotite-chalcopyrites as exsolution products resulted from the subsolidus re-equilibration of sulfide solid solution within amphibole megacrysts.amphibole megacrysts were first discovered inside and outside China. This discovery is important for the study of regional magma evolution and its associated mineralizations and ore sources as well.     

直脉蝎蛉科(昆虫纲长翅目) 3个异物同名和 1个种的修正

1996 年,张海春发表《新疆准噶尔盆地中生代直脉科(昆虫纲)昆虫化石》一文[古生物学报,35(4)：442-494],共有5个新种和5个老种,其中1个老种定为Mesopanorpa obscura(Martynov, 1927),包含3 个标本：① NIGP126378(92-T-22/K1),② NIGP126377(58SK15/K3),③ NIGP126376(92-T-22/K3)。另1个标本NIGP126379(93-HE-2K1,2)定为Protorthophlebia latipennis Tillyard, 1933。笔者在研究长翅目化石的过程中,发现张的4个标本系异物同名,前3 个标本即：① NIGP126378号标本勉强修订为1个近似种P. (Protorthophlebia) aff. obscura (Martynov,1925) Martynov,1927;② NIGP126377号标本修订为新名种Protorthophlebia(Protorthophlebia) badouwanica nom. nov.;③ NIGP126376号标本, 由于这个标本脉序结构与副蝎蛉科 Parachoristidae Tillyard, 1937的脉序特征相同,已被修订为另一个属、种Junggarochorista tuzigouensis Hong, 2009[13],已转移归入该科。④另1个标本NIGP126379号标本被修订为新名种 P.(Protorthophlebia) karamayiensis nom. nov.。上述被修订后的新名属、种在本文中作了必要的重新描述。修订的标本,都根据张海春论文中原标本照片显示的脉纹特征和文字描述。所修订学名的原标本均按原文的记录保存在中国科学院南京地质古生物研究所。     

Persistent halogenated compounds in black guillemots (Cepphus grylle) from Greenland--levels, compound patterns and spatial trends

Twenty-seven black guillemot eggs and 39 livers were analysed for polychlorinated biphenyls (PCBs), chlorinated pesticides including chlordane-related compounds and toxaphene, and polybrominated diphenylethers (PBDEs). The samples were collected at Qeqertarsuaq (Godhavn, West Greenland) and Ittoqqortoormiit (Scoresbysund, East Greenland). The concentrations of halogenated organic compounds in samples from East Greenland were somewhat higher than the corresponding concentrations from West Greenland. Differences in compound patterns were found between West and East Greenland, with higher percentages of the heavier PCB molecules, p,p(')-DDE and alpha-HCH in the samples from Ittoqqortoormiit. Similarly, different levels and different compositions were observed for eggs and livers. The eggs had generally higher concentrations of all compounds as well as higher percentages of CHB-50, CHB-62 and alpha-HCH than liver samples from the same area. Dividing the liver samples into age groups revealed increasing concentrations with age.     

Defining the geochemical baseline: a case of Hong Kong soils

A geochemical baseline provides the means to distinguish between the pedogenic origin and the anthropogenic origin of the trace element in the environmental compartments. We collected 271 soil samples representative of different parent rocks and soil types from the whole territory of Hong Kong and analyzed the composition of clay mineralogy and the contents of 15 chemical elements (Fe, Cd, As, etc.) for these samples. The baseline was predicted with the method of the normalization procedure combined with the relative cumulative frequency curve. The result indicated that Fe was the best reference element for the normalization procedure among the five potential reference elements (Fe, Al, Sc, Ti, and Mn), followed by Sc and Ti. A poor correlation was found between Sc, Ti, and Cu. The predicted baseline was much lower than the A-value of the Dutch List used usually in screening the polluted soil of Hong Kong, implying that the extent of heavy metal pollution might have been underestimated with respect to local lands. We also applied the cluster analysis to distinguish the geochemical associations of the trace elements due to its importance to the baseline. Approximately three major associations including the Fe–Mn-oxides related, Al oxides or Al-bearing-clay-mineralogy related and sulfide- related associations were observed from the dendrogram.     

CASM: a unified state parameter model for clay and sand

The purpose of this paper is to present a simple, unified critical state constitutive model for both clay and sand. The model, called CASM (Clay And Sand Model), is formulated in terms of the state parameter that is defined as the vertical distance between current state (v, p′) and the critical state line in v–ln p′ space. The paper first shows that the standard Cam-clay models (i.e. the original and modified Cam-clay models) can be reformulated in terms of the state parameter. Although the standard Cam-clay models prove to be successful in modelling normally consolidated clays, it is well known that they cannot predict many important features of the behavior of sands and overconsolidated clays. By adopting a general stress ratio-state parameter relation to describe the state boundary surface of soils, it is shown that a simple, unified constitutive model (CASM) can be developed for both clay and sand. It is also demonstrated that the standard Cam-clay yield surfaces can be either recovered or approximated as special cases of the yield locus assumed in CASM. The main feature of the proposed model is that a single set of yield and plastic potential functions has been used to model the behaviour of clay and sand under both drained and undrained loading conditions. In addition, it is shown that the behaviour of overconsolidated clays can also be satisfactorily modelled. Simplicity is a major advantage of the present state parameter model, as only two new material constants need to be introduced when compared with the standard Cam-clay models. © 1998 John Wiley & Sons, Ltd.     

Characterization of hard‐to‐differentiate dune stratification types in the Permian Coconino Sandstone (Arizona,USA)

Dune stratification types, which include grainfall, grainflow and ripple lamination, provide a record of the fine‐scale processes that deposited sediment on palaeo‐dune foresets. While these facies are relatively easy to distinguish in some cross‐bedded sandstones, for others – like the Permian Coconino Sandstone of northern and central Arizona – discrete stratification styles are hard to recognize at the bedding scale. Furthermore, few attempts have been made to classify fine‐scale processes in this sandstone, despite its renown as a classic aeolian dune deposit and Grand Canyon formation. To interpret depositional processes in the Coconino Sandstone, cross‐bed facies were characterized using a suite of sedimentary textures and structures. Bedding parameters were described at multiple scales via a combination of field and laboratory methods, including annotated outcrop photomosaics, strike and dip measurements, sandstone disaggregation and laser‐diffraction particle analysis, high‐resolution scans of thin sections, and scanning electron microscopy. Cross‐beds were observed to be laterally extensive along‐strike, with most dip angles ranging from the mid‐teens to mid‐twenties. While some cross‐bed sets are statistically coarser near their bases, others exhibit no significant vertical sorting trends. Both massive and laminated textures are visible in high‐resolution scans of thin sections, but laminae contacts are commonly indistinct, making normal and reverse grading difficult to define. Diagenetic features, such as stylolite seams and large pores, are also present in some samples and might indicate alteration of original textures like detrital clay laminae and carbonate minerals. Observed textures and sedimentary structures suggest that the cross‐beds may consist of grainflow and grainfall deposits, but these remain difficult to differentiate at outcrop and thin‐section scales. This characterization of fine‐scale processes will play a critical part in the development of depositional models for the Coconino Sandstone and elucidate interpretations for similar cross‐bedded formations.     

Hydrologic factors controlling groundwater salinity in northwestern coastal zone,Egypt

The aim of this article is to assess the main factors influencing salinity of groundwater in the coastal area between El Dabaa and Sidi Barani, Egypt. The types and ages of the main aquifers in this area are the fractured limestone of Middle Miocene, the calcareous sandstone of Pliocene and the Oolitic Limestone of Pleistocene age. The aquifers in the area are recharged by seasonal rainfall of the order of 150 mm/year. The relationship of groundwater salinity against the absolute water level, the well drilling depth, and the ability of aquifer to recharge has been discussed in the present work. The ability of aquifer to locally recharge by direct rainfall is a measure of the vertical permeability due to lithological and structural factors that control groundwater salinity in the investigated aquifers. On the other hand, the fracturing system as well as the attitude of the surface water divide has a prime role in changing both the mode of occurrence and the salinity of groundwater in the area. Directly to the west of Matrouh, where the coastal plain is the narrowest, and east of Barrani, where the coastal plain is the widest, are good examples of this concept, where the water salinity attains its maximum and minimum limits respectively. Accordingly, well drilling in the Miocene aquifer, in the area between El Negila and Barrani to get groundwater of salinities less than 5000 mg/l is recommended in this area, at flow rate less than 10 m³/hr/well. In other words, one can expect that the brackish water is probably found where the surface water divide is far from the shore line, where the Wadi fill deposits dominate (Quaternary aquifer), acting as a possible water salinity by direct rainfall and runoff.