珠江口盆地西江主洼油气差异分布机制

西江主洼是珠江口盆地一个低勘探程度洼陷，油气差异聚集特征明显，但其机理不清。本文在断陷盆地油气成藏理论指导下，利用研究区地质、地球物理和地球化学等资料，开展了烃源岩、断盖组合、储集体系和运聚模式等方面的研究。结果表明，裂陷期沉降、沉积中心有序迁移，造成主力烃源岩自东向西由文四段迁移至文三段、文一+二段，控制东、西部油气差异分布。恩平组区域性泥岩发育且晚期断裂缺乏，导致油气纵向上更易聚集于下构造层；区域泥岩减薄尖灭或晚期断裂切开盖层的区域，上构造层有一定油气分布。"源-汇"类型从宏观上控制储层优劣，影响下构造层油气富集程度；"仓储"运移是控制上构造层油气规模聚集的主要模式。下构造层古近系应作为重点部署方向，东部围绕文四段、西部围绕文三段、文一+二段烃源岩构成的含油气系统展开；上构造层勘探需关注珠海组，在隆起周边寻找具备"仓储"运移模式的有利区带。     

地铁施工对济南白泉泉群流量的影响

为研究地铁建设对济南白泉泉群的影响，在综合分析白泉泉域地质、水文地质条件的基础上，假定研究区岩溶强径流带位置及水力性质，利用FEFLOW软件建立地下水流数值模型。以规划地铁M1号线为研究对象，分析了济南东站、梁王站、梁王东站分别施工及3个站同时施工4种情景下，采用施工降水或施工降水+人工回灌两种施工方式对白泉泉群流量的影响。结果表明：单独采用施工降水的施工方式使得白泉泉群流量衰减，其中3个站同时施工对泉流量的影响最大，泉流量最大衰减达5.48%；各站分别施工时，济南东站对泉流量影响最大，泉流量较未施工时减少了0.043×10⁴ m³/d。采用施工降水+人工回灌的施工方式，能够有效缓解泉流量的衰减，各车站施工时的泉流量衰减由仅施工降水时的2.26%~5.48%降低至0.08%~1.21%。岩溶强径流带有利于地下水形成优势径流，促进白泉泉群补给，一定程度上缓解因地铁施工引起的泉流量衰减。     

随钻测录井地质导向二维分解实时绘图方法

根据随钻测录井实时地质导向和大斜度、水平井评价成图技术需求，针对传统绘图方法存在的弊端，提出了将测录井信息、井眼轨迹和地质模型进行二维分解的实时绘图方法。针对二维分解绘图方法绘图时空复杂度较高的问题，给出了不同事件驱动下的局部实时计算和拷屏重绘算法，控制了对CPU和内存的消耗、提高了绘图效率，消除了实时绘图的闪烁和卡顿现象。应用实例表明，二维分解实时绘图方法能够实现大尺度随钻测录井地质导向图形的流畅、无卡顿实时绘图，可提高大斜度、水平井储层模型评价的刻画精度和时效。     

30 m global impervious surface area dynamics and urban expansion pattern observed by Landsat satellites: From 1972 to 2019

Using more than three million Landsat satellite images, this research developed the first global impervious surface area (GISA) dataset from 1972 to 2019. Based on 120,777 independent and random reference sites from 270 cities all over the world, the omission error, commission error, and F-score of GISA are 5.16%, 0.82%, and 0.954, respectively. Compared to the existing global datasets, the merits of GISA include: (1) It provided the global ISA maps before the year of 1985, and showed the longest time span (1972–2019) and the highest accuracy (in terms of a large number of randomly selected and third-party validation sample sets); (2) it presented a new global ISA mapping method including a semi-automatic global sample collection, a locally adaptive classification strategy, and a spatio-temporal post-processing procedure; and (3) it extracted ISA from the whole global land area (not from an urban mask) and hence reduced the underestimation. Moreover, on the basis of GISA, the long time series global urban expansion pattern (GUEP) has been calculated for the first time, and the pattern of continents and representative countries were analyzed. The two new datasets (GISA and GUEP) produced in this study can contribute to further understanding on the human’s utilization and reformation to nature during the past half century, and can be freely download from http://irsip.whu.edu.cn/resources/dataweb.php.

     

北京云蒙山地区花岗岩穹隆及伸展构造的探讨

北京云蒙山花岗岩为一中生代侵入的花岗岩穹隆,花岗岩穹隆的叶理普遍发育,叶理轨迹基本平行于穹隆的外部边界,并显示出从核部到边部逐渐增强,东南侧明显强于西北侧的特点。变形构造研究显示,花岗岩穹隆的边部及围岩中普遍存在不同层次及不同运动方向的伸展构造。东南侧以具河防口－水峪伸展型韧性剪切带为特征,剪切运动标志显示为从ＮＷ－ＳＥ的正剪切运动,有限应变分析估算其剪切位移量在１０ｋｍ以上,剪切带上部被河防口正     

Fluid inclusions in upper mantle xenoliths from Northern Patagonia,Argentina: Evidence for an upper mantle diapir

Summary Three generations of fluid inclusions can be recognized in upper mantle xenoliths from alkali basalts of the Somoncura Massif, Northern Patagonia, Argentina. The first (early, primary) one consists of dense CO₂ inclusions which were trapped in the mantle-crust boundary zone (22–36 km minimum trapping depth). Their co-genetic relationship with silicate melt inclusions enables us to constrain their minimum trapping temperature at 1200°C, indicating a high temperature event in a cooler environment. The late (pseudosecondary and secondary) generations of fluid inclusions were classified in accordance with their homogenization temperature to liquid CO₂ (L1) and vapor CO₂ (L2) phase. The minimum trapping depth for the first of the late inclusions (L1) is about 16 km. In spite of the uncertainties related to this value, L1 inclusions indicate that the upper mantle rocks, of which samples were delivered by the basalts, had some residence time in the middle crust where they experienced a metasomatic event. The fact that this event did not destroy the earlier inclusions, places severe constraints on its duration. The second late inclusions (L2) are low-pressure CO₂ inclusions with a minimum trapping depth of only 2 km, presumably a shallow magma chamber of the host basalts. The succession of fluid inclusions strongly points toward a fairly fast uprising upper mantle underneath Northern Patagonia. The petrology and mineral chemistry of the peridotitic xenoliths support this view. Extensive partial melting and loss of these melts is indicated by the preponderance of harzburgites in the upper mantle underneath Northern Patagonia, a fairly unusual feature for a continental upper mantle. That depletion event as well as several metasomatic events — including those which left traces of fluid inclusions — are possibly related to a high-speed diapiric uprise of the upper mantle in this area. The path can be traced from the garnet peridotite stability field into the middle crust, a journey which must have been unusually fast. Differences in rock, mineral, and fluid inclusion properties between geographic locations suggest a diffuse and differential type of diapirism. Future studies will hopefully help to map the full extent and the highs and lows of this diapir and elucidate questions related to its origin and future.

---

Fluid-Einschlüsse in Erdmantel-Xenolithen von Nord-Patagonien: Evidenz für einen Diapir im oberen Erdmantel

Zusammenfassung Erdmantel - Xenolithe in Alkali-Basalten des Somoncure Massivs, Nord-Patagonien, Argentinien, führen drei Generationen von Fluid-Einschlüssen. Die erste (frühe, primäre) Generation besteht aus dichten CO₂-Einschlüssen, welche offenbar in der Mantel-Kruste Grenzzone (22–36 km Minimum-Tiefe) eingeschlossen wurden. CO₂-Einschlüsse sind kogenetisch mit Silikat-Schmelzeinschlüssen. Dies erlaubt die Abschätzung der Einschließ-Temperatur mit minimal 1200°C, was auf ein Hochtemperatur-Ereignis in einer deutlich kühleren Umgebung hinweist. Die späten (pseudosekundäre und sekundäre) CO₂- Fluid-Einschlüsse bilden zwei Generationen von denen die eine in die flüssige (L1), die andere in die Dampfphase (L2) homogenisieren. Die minimale Einschließ-Tiefe für die L1 Generation ist etwa 16 km. Dies bedeutet - auch bei Berücksichtigung der mit diesem Wert verbundenen Ungenauigkeit - daß diese Erdmantel-Gesteine einige Zeit in der mittleren Erdkruste verbrachten und ein metasomatisches Ereignis erlebten, bevor sie von den Basalten zur Erdoberfläche gebracht wurden. Die Tatsache, daß dieses Ereignis die frühen Einschlüsse nicht zerstörte, kann nur bedeuten, daß es von kurzer Dauer war. Die L2-Generation besteht aus Niedrigdruck CO₂-Einschlüssen mit einer Minimum-Einschließtiefe von nur 2 km. Dies könnte in einer seichten Magmakammer des Wirt Basaltes geschehen sein.Die Abfolge von Fluid-Einschlüssen deutet auf einen relativ schnell aufsteigenden oberen Erdmantel unterhalb von Patagonien hin. Die Petrologie und Mineralchemie der peridotitischen Xenolithe unterstützen das. Die Vorherrschaft von Harzburgiten im Erdmantel unterhalb von Nord-Patagonien deutet auf umfangreiche Bildung partieller Schmelzen und deren Abfuhr hin — eine für einen kontinentalen Mantel ungewöhnliche Situation. Sowohl die Verarmungsereignisse, als auch die metasomatischen Veränderungen (einschließlich jene, welche Spuren in Form von Fluid Einschlüssen hinterließen) machen das Vorhandensein eines schnell aufsteigenden Daipirs im oberen Erdmantel dieser Gegend wahrscheinlich. Der Aufstieg kann vom Stabilitätsbereich der Granat-Peridotite bis in die mittlere Kruste verfolgt werden und muß daher relativ schnell erfolgt sein. Unterschiede in Gesteins-, Mineral und Fluid-Eigenschaften zwischen verschiedenen Lokalitäten legen einen diffusen und differenziellen Diapirismus nahe. Zukünftige Studien sollten es ermöglichen, das Gesamtausmaß und die unterschiedlichen Aufstiegshöhen des Diapirs zu kartieren und Hinweise auf seine Entstehung und zukünftige Entwicklung zu erhalten.

---

---

With 5 Figures     

High-resolution sequence stratigraphy of the Lower Triassic ‘Buntsandstein’ in the Netherlands and northwestern Germany

Detailed log correlations of the largely fluvio-lacustrine Lower Triassic Buntsandstein (Late Permian-Early Anisian), carried out on 80 wells in the Dutch onshore and offshore areas, can be linked to northwest-German high-resolution sequence stratigraphy. The correlations show that cyclic sedimentation occurred in large parts of the basin. Seven 1st-order sequences are recognised, namely the Main Claystone, Rogenstein, Volpriehausen, Detfurth, Hardegsen, Solling and Lower Röt Sequences. They are overlain by the lower part of the Upper Röt–Lower Muschelkalk Sequence. Distinct sequence boundaries have been identified at the bases of four sequences: Volpriehausen, Detfurth, Solling and Upper Röt. The higher-order sequences consist of fining-upwards cycles with a thickness of up to tens of metres. The sequences are laterally persistent and have a characteristic expression on gamma-ray and sonic logs. In the Lower Buntsandstein, they display a uniform character throughout most of the area, with only minor differences in thickness or lithology. NNE-oriented lows and swells were formed during deposition of the Volpriehausen, Detfurth and Hardegsen Sequences. Uplift prior to the deposition of the Solling Sequence caused deep erosion on the swells in the basin and minor erosion in the lows. The high-resolution sequences probably represent alternating, relatively wet and dry climatic periods, with a periodicity of about 100 000 years. An analysis of the sequences suggests that their reduced thickness on the swells is mainly the effect of erosion. This is supported by analyses of the accumulation patterns and rates.     

Compressibility and crystal structure of sillimanite, Al2SiO5, at high pressure

The unit-cell dimensions and crystal structure of sillimanite at various pressures up to 5.29 GPa have been refined from single-crystal X-ray diffraction data. As pressure increases, a and b decrease linearly, whereas c decreases nonlinearly with a slightly positive curvature. The axial compression ratios at room pressure are β_a:β_b:β_c=1.22:1.63:1.00. Sillimanite exhibits the least compressibility along c, but the least thermal expansivity along a (Skinner et al. 1961; Winter and Ghose 1979). The bulk modulus of sillimanite is 171(1) GPa with K′=4 (3), larger than that of andalusite (151 GPa), but smaller than that of kyanite (193 GPa). The bulk moduli of the [Al1O₆], [Al2O₄], and [SiO₄] polyhedra are 162(8), 269(33), and 367(89) GPa, respectively. Comparison of high-pressure data for Al₂SiO₅ polymorphs reveals that the [SiO₄] tetrahedra are the most rigid units in all these polymorphic structures, whereas the [AlO₆] octahedra are most compressible. Furthermore, [AlO₆] octahedral compressibilities decrease from kyanite to sillimanite, to andalusite, the same order as their bulk moduli, suggesting that [AlO₆] octahedra control the compression of the Al₂SiO₅ polymorphs. The compression of the [Al1O₆] octahedron in sillimanite is anisotropic with the longest Al1-OD bond shortening by ～1.9% between room pressure and 5.29 GPa and the shortest Al1-OB bond by only 0.3%. The compression anisotropy of sillimanite is primarily a consequence of its topological anisotropy, coupled with the compression anisotropy of the Al-O bonds within the [Al1O₆] octahedron.     

Evidence of ancient life at 207 m depth in a granitic aquifer

The results of electron-microscopy investigations of calcite precipitated in a water-conducting fracture in a ca. 1800 Ma granitic rock from 207 m below sea level at the island of Aspo on the southeastern (Baltic) coast of Sweden are compared with measurements of carbon, oxygen, and sulfur isotope composition of the calcite and embedded pyrite. Parts of the calcite had extremely low delta 13C values, indicative of biological activity, and contained bacteria-like microfossils occurring in colonies and as typical biofllms. X-ray microanalysis demonstrated these fossils to be enriched in carbon. Our results provide evidence for ancient life in deep granitic rock aquifers and suggest that the modern microbial life found there is intrinsic. Modeling historical and present geochemical processes in deep granitic aquifers should, therefore, preferably include biologically catalyzed reactions. The results also suggest that the search for life on other planets, e.g., Mars, should include subsurface material.     

The Ms = 6.2, June 15, 1995 Aigion earthquake (Greece): evidence for low angle normal faulting in the Corinth rift

We present the results of a multidisciplinary study of the M_s = 6.2, 1995, June 15, Aigion earthquake (Gulf of Corinth, Greece). In order to constrain the rupture geometry, we used all available data from seismology (local, regional and teleseismic records of the mainshock and of aftershocks), geodesy (GPS and SAR interferometry), and tectonics. Part of these data were obtained during a postseismic field study consisting of the surveying of 24 GPS points, the temporary installation of 20 digital seismometers, and a detailed field investigation for surface fault break. The Aigion fault was the only fault onland which showed detectable breaks (< 4 cm). We relocated the mainshock hypocenter at 10 km in depth, 38 ° 21.7 N, 22 ° 12.0 E, about 15 km NNE to the damaged city of Aigion. The modeling of teleseismic P and SH waves provides a seismic moment M_o = 3.4 10¹⁸ N.m, a well constrained focal mechanism (strike 277 °, dip 33 °, rake – 77°), at a centroidal depth of 7.2 km, consistent with the NEIC and the revised Harvard determinations. It thus involved almost pure normal faulting in agreement with the tectonics of the Gulf. The horizontal GPS displacements corrected for the opening of the gulf (1.5 cm/year) show a well-resolved 7 cm northward motion above the hypocenter, which eliminates the possibility of a steep, south-dipping fault plane. Fitting the S-wave polarization at SERG, 10 km from the epicenter, with a 33° northward dipping plane implies a hypocentral depth greater than 10 km. The north dipping fault plane provides a poor fit to the GPS data at the southern points when a homogeneous elastic half-space is considered: the best fit geodetic model is obtained for a fault shallower by 2 km, assuming the same dip. We show with a two-dimensional model that this depth difference is probably due to the distorting effect of the shallow, low-rigidity sediments of the gulf and of its edges. The best-fit fault model, with dimensions 9 km E–W and 15 km along dip, and a 0.87 m uniform slip, fits InSAR data covering the time of the earthquake. The fault is located about 10 km east-northeast to the Aigion fault, whose surface breaks thus appears as secondary features. The rupture lasted 4 to 5 s, propagating southward and upward on a fault probably outcropping offshore, near the southern edge of the gulf. In the shallowest 4 km, the slip – if any – has not exceeded about 30 cm. This geometry implies a large directivity effect in Aigion, in agreement with the accelerogram aig which shows a short duration (2 s) and a large amplitude (0.5 g) of the direct S acceleration. This unusual low-angle normal faulting may have been favoured by a low-friction, high pore pressure fault zone, or by a rotation of the stress directions due to the possible dip towards the south of the brittle-ductile transition zone. This fault cannot be responsible for the long term topography of the rift, which is controlled by larger normal faults with larger dip angles, implying either a seldom, or a more recently started activity of such low angle faults in the central part of the rift.