Geology of the Continental Margin of Enderby and Mac. Robertson Lands, East Antarctica: Insights from a Regional Data Set

In 2001 and 2002, Australia acquired an integrated geophysical data set over the deep-water continental margin of East Antarctica from west of Enderby Land to offshore from Prydz Bay. The data include approximately 7700 km of high-quality, deep-seismic data with coincident gravity, magnetic and bathymetry data, and 37 non-reversed refraction stations using expendable sonobuoys. Integration of these data with similar quality data recorded by Japan in 1999 allows a new regional interpretation of this sector of the Antarctic margin. This part of the Antarctic continental margin formed during the breakup of the eastern margin of India and East Antarctica, which culminated with the onset of seafloor spreading in the Valanginian. The geology of the Antarctic margin and the adjacent oceanic crust can be divided into distinct east and west sectors by an interpreted crustal boundary at approximately 58° E. Across this boundary, the continent–ocean boundary (COB), defined as the inboard edge of unequivocal oceanic crust, steps outboard from west to east by about 100 km. Structure in the sector west of 58° E is largely controlled by the mixed rift-transform setting. The edge of the onshore Archaean–Proterozoic Napier Complex is downfaulted oceanwards near the shelf edge by at least 6 km and these rocks are interpreted to underlie a rift basin beneath the continental slope. The thickness of rift and pre-rift rocks cannot be accurately determined with the available data, but they appear to be relatively thin. The margin is overlain by a blanket of post-rift sedimentary rocks that are up to 6 km thick beneath the lower continental slope. The COB in this sector is interpreted from the seismic reflection data and potential field modelling to coincide with the base of a basement depression at 8.0–8.5 s two-way time, approximately 170 km oceanwards of the shelf-edge bounding fault system. Oceanic crust in this sector is highly variable in character, from rugged with a relief of more than 1 km over distances of 10–20 km, to rugose with low-amplitude relief set on a long-wavelength undulating basement. The crustal velocity profile appears unusual, with velocities of 7.6–7.95 km s⁻¹ being recorded at several stations at a depth that gives a thickness of crust of only 4 km. If these velocities are from mantle, then the thin crust may be due to the presence of fracture zones. Alternatively, the velocities may be coming from a lower crust that has been heavily altered by the intrusion of mantle rocks. The sector east of 58° E has formed in a normal rifted margin setting, with complexities in the east from the underlying structure of the N–S trending Palaeozoic Lambert Graben. The Napier Complex is downfaulted to depths of 8–10 km beneath the upper continental slope, and the margin rift basin is more than 300 km wide. As in the western sector, the rift-stage rocks are probably relatively thin. This part of the margin is blanketed by post-rift sediments that are up to about 8 km thick. The interpreted COB in the eastern sector is the most prominent boundary in deep water, and typically coincides with a prominent oceanwards step-up in the basement level of up to 1 km. As in the west, the interpretation of this boundary is supported by potential field modelling. The oceanic crust adjacent to the COB in this sector has a highly distinctive character, commonly with (1) a smooth upper surface underlain by short, seaward-dipping flows; (2) a transparent upper crustal layer; (3) a lower crust dominated by dipping high-amplitude reflections that probably reflect intruded or altered shears; (4) a strong reflection Moho, confirmed by seismic refraction modelling; and (5) prominent landward-dipping upper mantle reflections on several adjacent lines. A similar style of oceanic crust is also found in contemporaneous ocean basins that developed between Greater India and Australia–Antarctica west of Bruce Rise on the Antarctic margin, and along the Cuvier margin of northwest Australia.     

Code of Practice For Ocean Mining: An International Effort to Develop a Code For Environmental Management of Marine Mining

A code of practice for ocean mining has been developed by the International Marine Minerals Society. The code provides general guiding Principles for development of marine mineral resources and delineates Operating Guidelines for application, as appropriate, at specific mining sites. In total 11 operating guidelines are provided to serve as benchmarks for industry and targets for regulatory agencies and other stakeholders. They include the following commitments: •To sustainable development, •To environmentally responsible corporate ethics, •To the development of effective community partnership, •To implementation of environmental risk management, •To the integration of environmental management into all phases of development, •To the establishment of corporate environmental performance targets, •To timely environmental improvements and upgrading, •To responsible rehabilitation of operations sites and decommissioning of facilities, and •To accurate and timely, reporting and documentation, archiving, and performance review.     

An ocean bottom,microprocessor based seismometer

We describe the design and construction of an ocean bottom seismometer configured as a computer, based on an Intersil IM6100 microprocessor plus appropriate peripheral devices. The sensors consist of triaxial 1 Hz seismometers and a hydrophone, each sensor channel being filtered prior to digitizing so that typical noise spectra are whitened. Digital data are recorded serially on magnetic tape. The instrument is placed on the ocean bottom by allowing it to fall freely from just below the surface. An acoustic system allows precise determination of instrument position, acoustic recall, and transmission of operational information to the surface. Release from an expendable anchor is accomplished by redundant pyrotechnic bolts which can be fired by acoustic command or by precision timers.The operational flexibility provided by the micro-computer, which executes the DEC PDP8/E instruction set, enables optimum use of the 6-hr recording capacity (at 128 samples/second/channel) in the context of the particular experiment being performed.

---

     

光生物反应器中光衰减特征与螺旋藻生长动力学研究

分析了光照强度在光生物反应器中的分布特征，结果表明，当光波长及光传播的路径确定时，光生物反应器中光衰减特征主要受培养物生物量浓度的影响，由回归的模型对实验数据的拟合可分析光衰减特征与培养物生物量浓度的相关性，为光生物反应器中平均光照强度的确定奠定基础。在光生物反应器中，当营养底物和环境温度不是螺旋藻生长限制因子时，通过平均光照强度对螺旋藻比生长速率的影响分析，结果表明，在实验条件下，螺旋藻比生长速率与平均光照强度的动力学模型可用Aiba光生长抑制方程描述，光亲和系数Ks为238.29umol/(m^2.s)，光抑制系数Ki为0．00493s.m^2/umol，光生物反应器中螺旋藻生长的饱和光照强度出现在190－272umol/(m^2.s)的范围内。     

Composition and quantitative distribution of macrozoobenthos in Amur Bay

The data on the species composition, trophic structure, and distribution of macrozoobenthos in Amur Bay obtained in 2001 are presented. Long-term changes in the benthos are analyzed. In 2001, the total benthos biomass significantly increased, although the parameters of the species richness declined as compared to 1986–1989. In 2001, as well as in the 1970s and 1980s, the benthos trophic structure was characterized by the prevalence of deposit feeders. The entire structure of the benthos is evaluated as an eutrophic one. Eutrophication of the bay is considered to be the most probable cause of the negative changes in the benthic communities of the bay in 2001, as well as 15 years ago.     

Water vapor in the atmosphere over the northern Tien Shan

Refined data of systematic measurements of total water vapor in the atmosphere from May 1980 to April 2005 are presented. The data were obtained at the Issyk Kul atmospheric-monitoring station by the method of solar molecular-absorption spectroscopy. Over 25 years, the annual mean water-vapor content in the atmosphere increased by 4.5% at a mean rate of increase of 0.18% per year. However, the water-vapor content decreased in the last five years. The results of statistical processing of experimental data (general statistical characteristics, correlation coefficients, composite oscillations) are described. A refined model is proposed for forecasts of temporal variations in the monthly mean and annual mean water-vapor contents for the coming years. The model includes a linear trend and the sum of oscillations with periods close to the periods of a number of well-known geophysical phenomena. Regression equations are proposed to relate the water-vapor content in the atmospheric column to the surface temperature and absolute humidity.     

A literature review of the saturation state of seawater with respect to calcium carbonate and its possible significance for scale formation on OTEC heat exchangers

An investigation has been made of available data on the saturation state of seawater with respect to calcium carbonate and its possible significance for scale formation on Ocean Thermal Energy Conversion (OTEC) heat exchangers. Pertinent oceanographic data is lacking at or near potential OTEC sites for the calculation of the degree of saturation of seawater with respect to calcium carbonate. Consequently, only “extrapolated” saturation values can be used. These indicate that near surface seawater is probably supersaturated, with respect to the calcium carbonate phases calcite and aragonite, at all potential OTEC sites. The deep seawater that would be brought to the surface at the potential Atlantic Ocean sites is also likely to be supersaturated with respect to calcium carbonate. The deep seawater at the potential Pacific Ocean sites may be slightly undersaturated.The fact that OTEC heat exchangers will be operating in seawater, which is supersaturated with respect to calcium carbonate, means that if nucleation of calcite or aragonite occurs on the heat exchanger surfaces, significant growth rates of calcium carbonate scale may be expected. The potential for calcium carbonate nucleation is highest at cathodic metal surface locations, which are produced as the result of aluminum corrosion in seawater. Consequently, corrosion and scale formation may be closely related. What the possible effects of biofouling may be on this process are not known.