Geostatistical estimation of chemical contamination in stream sediments: The case study of Vale das Gatas mine (northern Portugal)

Based on an environmental geochemistry case study carried out in the neighbourhood of a W–Sn abandoned mine, the pollution in stream sediments was modelled through a Global Contamination Index. Such an index permits one to summarize the combination of deleterious elements in a single variable, obtained by the projection of samples onto the first axis of a PCASD (Principal Components Analysis of Standardized Data) applied to the entire n × p matrix containing the available concentrations of p = 16 elements in the set of n = 220 collected samples.In order to provide a sound basis for a coherent planning of the remediation process which will be put in operation in the affected area, it is necessary to balance the costs of reclaiming with the probabilities of exceeding the upper limits accepted for concentrations of environmentally harmful elements in sediments. Given these limits, they are back-transformed in the index values, providing a practical threshold between ‘clean’ and ‘contaminated’ samples. On the other hand, the minimum dimension of the cell to be reclaimed is restrained by the selected remediation process to be applied in the affected area. Hence, to meet the constraints of such a remediation process, it is required to estimate the probabilities of exceeding the index threshold in technologically meaningful sub-areas. For this end, the Indicator Block Kriging technique was applied, producing a series of maps where sub-areas to be reclaimed can be spotted for different probability levels. These maps, on which the decision making remediation agency can rely for its cost-benefit analysis, take into account both the spatial structure of ‘clean’ vs. ‘contaminated’ samples and the constraints of the reclaiming process.     

利用MC-ICPMS对水样中硼同位素比值的测定

采用Amberlite IRA-743硼特效树脂进行水溶液中硼的分离,对洗脱液温度、体积以及树脂动态交换容量等进行了实验.它的动态交换容量为4.2 mg/g,在室温条件下,用5 mL 2%HNO3可定量从树脂柱上洗脱被吸附的硼.采用Neptune型MC-ICPMS进行硼同位素组成的测定,1 μg/g浓度的硼标准溶液获得放大的信号强度约为0.7V,硼的化学分离过程有效避免了质量歧视效应.实验结果表明,MC-ICPMS对硼存在严重的记忆效应,通过采用5%HNO3-(1%HNO3 0.1%HF)-H2O-20%NH3H2O-H2O的交替清洗方法,可在约1 h内消除硼的记忆效应.在最佳仪器条件下,对含有250 ng硼的水样,可以快速测定硼的同位素组成,占δ11B测定的绝对偏差为0.4‰-0.5‰(SD).     

Integration and magnitude homogenization of the Egyptian earthquake catalogue

The aim of the present work is to compile and update a catalogue of the instrumentally recorded earthquakes in Egypt, with uniform and homogeneous source parameters as required for the analysis of seismicity and seismic hazard assessment. This in turn requires a detailed analysis and comparison of the properties of different available sources, including the distribution of events with time, the magnitude completeness, and the scaling relations between different kinds of magnitude reported by different agencies. The observational data cover the time interval 1900–2004 and an area between 22°–33.5° N and 25°–36° E. The linear regressions between various magnitude types have been evaluated for different magnitude ranges. Using the best linear relationship determined for each available pair of magnitudes, as well as those identified between the magnitudes and the seismic moment, we convert the different magnitude types into moment magnitudes M _W, through a multi-step conversion process. Analysis of the catalogue completeness, based on the M _W thus estimated, allows us to identify two different time intervals with homogeneous properties. The first one (1900–1984) appears to be complete for M _W ≥ 4.5, while the second one (1985–2004) can be considered complete for magnitudes M _W ≥ 3.     

Boron incorporation into mullite

Summary Boron-doped mullites were synthesized using aluminium nitrate-nonahydrate, tetraethoxysilane and boric acid in a sol–gel process with subsequent annealing at 950 and 1300 °C for five hours. Two different bulk compositions with constant Al₂O₃ contents (60 and 70 mol%, respectively) and varying SiO₂ plus B₂O₃ contents were investigated. X-ray powder diffraction analyses yielded a linear decrease of the lattice parameters with increasing bulk B₂O₃ content, which was interpreted as to be due to boron incorporation. Related to the increasing boron content, corresponding infrared spectra revealed a slight and continuous shift for most of the absorption bands. These data show that mullite is able to incorporate large amounts of boron into its structure (up to about 20 mol% B₂O₃ depending on the bulk composition of the starting materials). Infrared analyses suggest that boron is incorporated into the mullite structure in form of planar three-fold coordinated BO₃ groups. Author’s address: A. Beran, Institut für Mineralogie und Kristallographie, Universit?t Wien-Geozentrum, Althanstra?e 14, 1090 Wien, Austria     

Mineralogy and geochemistry of platinum-group elements in the Aguablanca Ni-Cu deposit (SW Spain)

Summary The Aguablanca Ni-Cu-(PGE) magmatic sulphide deposit is associated with a magmatic breccia located in the northern part of the Aguablanca gabbro (SW, Iberia). Three types of ores are present: semi-massive, disseminated, and chalcopyrite-rich veined ore. The principal ore minerals are pyrrhotite, pentlandite and chalcopyrite. A relatively abundant platinum-group mineral (PGM) assemblage is present and includes merenskyite, melonite, michenerite, moncheite and sperrylite. Moreover, concentrations of base and precious metals and micro-PIXE analyses were obtained for the three ore-types. The mineralogy and the mantle-normalised chalcophile element profiles strongly suggest that semi-massive ore represents mss crystallisation, whereas the disseminated ore represents an unfractionated sulphide liquid and the chalcopyrite-rich veined ore a Cu-rich sulphide liquid. Palladium-bearing minerals occur commonly enclosed within sulphides, indicating a magmatic origin rather than hydrothermal. The occurrences and the composition of these minerals suggest that Pd was initially dissolved in the sulphides and subsequently exsolved at low temperatures to form bismutotellurides. Negative Pt and Au anomalies in the mantle-normalised chalcophile element profiles, a lack of Cu-S correlation and textural observations (such as sperrylite losing its euhedral shape when in contact with altered minerals) suggest partial remobilisation of Pt, Au and Cu by postmagmatic hydrothermal fluids after the sulphide crystallisation. Authors’ addresses: R. Pi?a, L. Ortega, R. Lunar, Departamento de Cristalografía y Mineralogía, Facultad de Geología, Universidad Complutense de Madrid, ES-28040 Madrid, Spain; F. Gervilla, Facultad de Ciencias, Instituto Andaluz de Ciencias de la Tierra, Universidad de Granada-CSIC, Avda. Fuentenueva, s/n, ES-18002 Granada, Spain     

Methodology of hydrogeological characterization of deep carbonate aquifers as potential reservoirs of groundwater. Case of study: the Jurassic aquifer of <Emphasis Type="Italic">El Maestrazgo</Emphasis> (Castellón,Spain)

A methodology for the characterization of deep carbonate aquifers has been developed and applied to El Maestrazgo Jurassic aquifer in Castellón, Spain. Characterization of these aquifer formations, located at more than 300 m deep, consisted of a previous phase of compilation, analysis and synthesis of the existing information about the area, followed by a coordinated combination of different speciality studies: geology, stratigraphy, structural analysis, hydrogeology, hydrochemistry, geophysics and remote sensing. Geological studies included geological mapping, definition of stratigraphical units and facies and structural analysis. The aim of the hydrogeology study was to define aquifer formations, recharge area, aquifer points inventory and groundwater flow directions for the establishment of piezometric and water quality observation nets. Special techniques were applied, like thermal infrared aerial images and the evaluation of submarine groundwater discharge by means of natural radium isotopes. Hydrochemical techniques, including majority elements characterization and stable isotopes (¹⁸O, ²H and ³H) determination, allowed classifying hydrochemical facies and establishing a renewal pattern for water within the system. Geophysics was useful in determining the aquifer geometry, the features of the basement and the petrophysical characteristics of the geological formations. Preliminary results show an important tectonic complexity and the possibilities for groundwater uses in the area of study.     

Implementation of reconstructed geomorphologic units in landslide susceptibility mapping: the Melen Gorge (NW Turkey)

In the international literature, although considerable amount of publications on the landslide susceptibility mapping exist, geomorphology as a conditioning factor is still used in limited number of studies. Considering this factor, the purpose of this article paper is to implement the geomorphologic parameters derived by reconstructed topography in landslide susceptibility mapping. According to the method employed in this study, terrain is generalized by the contours passed through the convex slopes of the valleys that were formed by fluvial erosion. Therefore, slope conditions before landsliding can be obtained. The reconstructed morphometric and geomorphologic units are taken into account as a conditioning parameter when assessing landslide susceptibility. Two different data, one of which is obtained from the reconstructed DEM, have been employed to produce two landslide susceptibility maps. The binary logistic regression is used to develop landslide susceptibility maps for the Melen Gorge in the Northwestern part of Turkey. Due to the high correct classification percentages and spatial effectiveness of the maps, the landslide susceptibility map comprised the reconstructed morphometric parameters exhibits a better performance than the other. Five different datasets are selected randomly to apply proper sampling strategy for training. As a consequence of the analyses, the most proper outcomes are obtained from the dataset of the reconstructed topographical parameters and geomorphologic units, and lithological variables that are implemented together. Correct classification percentage and root mean square error (RMSE) values of the validation dataset are calculated as 86.28% and 0.35, respectively. Prediction capacity of the different datasets reveal that the landslide susceptibility map obtained from the reconstructed parameters has a higher prediction capacity than the other. Moreover, the landslide susceptibility map obtained from the reconstructed parameters produces logical results.     

Nonlinear Analysis of Local Site Effects on Seismic Ground Response in the Bam Earthquake

The influence of local geologic and soil conditions on the intensity of ground shaking is addressed in this study. The amplification of the ground motion due to local site effects resulted in severe damage to dwellings in the Bam area during the 2003 Bam Earthquake. A unique set of strong motion acceleration recordings was obtained at the Bam accelerograph station. Although the highest peak ground acceleration recorded was the vertical component (nearly 1 g), the longitudinal component (fault-parallel motion) clearly had the largest maximum velocity as well as maximum ground displacement. Subsurface geotechnical and geophysical (down-hole) data in two different sites have been obtained and used to estimate the local site condition on earthquake ground motion in the area. The ground response analyses have been conducted considering the nonlinear behavior of the soil deposits using both equivalent linear and nonlinear approaches. The fully nonlinear method embodied in FLAC was used to evaluate the nonlinear soil properties on earthquake wave propagation through the soil layer, and compare with the response from the equivalent linear approach. It is shown that thick alluvium deposits amplified the ground motion and resulted in significant damage in residential buildings in the earthquake stricken region. The comparison of results indicated similar response spectra of the motions for both equivalent and nonlinear analyses, showing peaks in the period range of 0.3–1.5 s. However, the amplification levels of nonlinear analysis were less than the equivalent linear method especially in long periods. The observed response spectra are shown to be above the NEHRP building code design requirements, especially at high frequencies.     

青藏高原中、东部局地因素对地温的双重影响(Ⅰ): 植被和雪盖

青藏高原冻土区地温既受海拔、纬度和经度(干燥度)区域地带性规律控制, 同时它又受植被、雪盖、砂层、 水被和地质构造等局地因素的显著影响. 局地因素对地温的影响具有双重性: 在不同域值条件下, 它可增高或降低地温. 地温随植被覆盖度减小而逐渐增高, 但覆盖度减到0～20%时, 地温反而降低. 在青藏高原东部、南部和腹部的高山区, 冷季降雪多, 很多地段为稳定积雪区, 雪盖厚, 持续时间长, 对浅层地温起保温作用;而高原腹部的高平原、河谷和盆地冷季降雪较少, 雪盖薄, 持续时间较短, 一般保温作用微弱. 当雪盖厚度超过20 cm以后, 保温作用即开始增强;在暖季因积雪存在时间短, 雪盖薄, 短期内对浅层地温起冷却作用. 总之, 每种局地因素迫使地温向相反方向转化阶段是一个区间值, 为渐变过程. 随时空尺度变化, 局地因素的影响变化很大. 有些地段, 几种局地因素共同作用, 加上活动构造和地形、地貌等的影响, 使地温的时空分布和局地因素对其影响或控制变得错综复杂. 因此, 研究和预测地温特征和变化趋势, 需要在监测植被和积雪作用的基础上进行参数选择、 验证和优化.     

中国-俄罗斯原油管道工程(漠河-大庆段)冻土工程地质考察与研究进展

在2005-2007年期间,先后3次对中国-俄罗斯原油管道漠河-大庆段沿线的冻土工程地质条件等进行科学考察,开展了冻土工程地质条件及其在气候变化和人类活动作用下的评价和预测研究.考察研究结果表明:管道沿线多年冻土在各类融区、季节冻土和水系等分隔作用下呈片状或岛状分布,沿线岛状、稀疏岛状及零星岛状占多年冻土区段的40%左右;管道沿线多年冻土随着气候的转暖和人类活动的影响不断退化.地形地貌单元、植被分布、地表水分条件的变化等局部因素对多年冻土的分布和地下冰的赋存产生重要的影响,管道沿线大约分布有50 km左右的沼泽湿地,其表层为腐殖质土及泥炭层,泥炭层下面分布着含土冰层或地下冰,是管道沿线最差的冻土工程地质地段;由于中俄原油管道沿线水系发育多,冻胀丘、冰椎和冰幔等不良冻土现象广泛分布.科学考察的成果为管道沿线冻土工程地质条件评价和预测、管道的稳定性影响分析以及后期的长期检测系统设置等研究奠定坚实的基础,进一步为即将开工的中俄原油管道漠河-大庆段工程的设计、施工提供科学依据.