The impact of wave loads and pore-water pressure generation on initiation of sediment transport

The build-up of pore-water pressure by waves can lead to sediment liquefaction and subsequent transport by traction currents. This process was investigated by measuring pore-water pressures both in a field experiment and laboratory wave tank tests. Liquefaction was observed in the wave tank tests. The results suggest that sand is less susceptible than silts to wave-induced liquefaction because of the tendency to partially dissipate pore-water pressures. However, previous studies have determined that pore-water pressures must approach liquefaction before current velocities necessary to initiate transport are reduced. Once liquefaction has occurred more sediment can be transported.     

Active spreading and hydrothermalism in North Fiji Basin (SW Pacific). Results of Japanese French Cruise Kaiyo 87

The aim of the Japanese-French Kaiyo 87 cruise was the study of the spreading axis in the North Fiji Basin (SW Pacific). A Seabeam and geophysical survey allowed us to define the detailed structure of the active NS spreading axis between 16° and 22° S and its relationships with the left lateral motion of the North Fiji Fracture Zone. Between 21° S and 18°10′ S, the spreading axis trends NS. From 18°10 S to 16°40 S the orientation of the spreading axis changes from NS to 015°. North of 16°40′ S the spreading axis trends 160°. These two 015° and 160° branches converge with the left lateral North Fiji fracture zone around 16°40′ S to define an RRFZ triple junction. Water sampling, dredging and photo TV deep towing give new information concerning the hydrothermal activity along the spreading axis. The discovery of hydrothermal deposits associated with living communities confirms this activity.     

Heat flow and mass wasting in the Wilmington Canyon Region: U.S. Continental Margin

The average corrected heat flow in the Wilmington Canyon region, an area of inferred slope instability, is 35 ± 10 mW/m². This average heat flow is marginally consistent with the 46 ± 9 mW/m² measured at other North Atlantic sites over 160 m.y. old. High topographic relief causes most of the variability in surface heat flow and may lower the mean surface heat flow. There is no significant difference between the average corrected heat flow of 35 ± 10 mW/m² in sediment slide areas and the average corrected heat flow of 34 ± 10 mW/m² in undisturbed sediments.     

Behavioural Effects of Chemically Dispersed Oil and Subsequent Recovery in Diploria strigosa (Dana)

Abstract. Survival and behaviour of the hermatypic coral Diploria strigosa was studied during 6–24 h doses with water-accomodated fractions of chemically dispersed crude oil, and for a subsequent recovery period of 1 month. Experiments utilized a flow-through laboratory dosing procedure and incorporated petroleum hydrocarbon measurements in order to simulate a major but short-term oil spill in shallow subtidal benthic reef environments. Chemically dispersed oil treatments consisted of Arabian Light Crude oil with Corexit 9527 or BP1100WD at 1–20 ppm concentrations of oil.
In general, effects observed were sub-lethal, temporary, and associated with the highest concentrations tested. Responses to the presence of dispersed oil at 20ppm for 24 h included mesenterial filament extrusion, extreme tissue contraction, tentacle retraction and localized tissue rupture. The nature and severity of reactions during the dosing phase varied between colonies and treatments, but colonies typically resumed normal behaviour within 2 h to 4 d of the recovery period. It therefore seems unlikely that observed biological effects would impair long-term viability.     

Population structure of Haliotis rubra from South Australia inferred from nuclear and mtDNA analyses

1Introduction ThemajorityofAustralia’sabalonefisheryex ports(5.135kt,worth＄216millionin2002～2003,ABARE2004)consistofblacklipabalone(HaliotisrubraLeach,1814).AssuchH.rubrais consideredasanimportantmarineresourcewithin Australia.Likemanyabalonespecieswor…     

Geology of the Continental Margin of Enderby and Mac. Robertson Lands, East Antarctica: Insights from a Regional Data Set

In 2001 and 2002, Australia acquired an integrated geophysical data set over the deep-water continental margin of East Antarctica from west of Enderby Land to offshore from Prydz Bay. The data include approximately 7700 km of high-quality, deep-seismic data with coincident gravity, magnetic and bathymetry data, and 37 non-reversed refraction stations using expendable sonobuoys. Integration of these data with similar quality data recorded by Japan in 1999 allows a new regional interpretation of this sector of the Antarctic margin. This part of the Antarctic continental margin formed during the breakup of the eastern margin of India and East Antarctica, which culminated with the onset of seafloor spreading in the Valanginian. The geology of the Antarctic margin and the adjacent oceanic crust can be divided into distinct east and west sectors by an interpreted crustal boundary at approximately 58° E. Across this boundary, the continent–ocean boundary (COB), defined as the inboard edge of unequivocal oceanic crust, steps outboard from west to east by about 100 km. Structure in the sector west of 58° E is largely controlled by the mixed rift-transform setting. The edge of the onshore Archaean–Proterozoic Napier Complex is downfaulted oceanwards near the shelf edge by at least 6 km and these rocks are interpreted to underlie a rift basin beneath the continental slope. The thickness of rift and pre-rift rocks cannot be accurately determined with the available data, but they appear to be relatively thin. The margin is overlain by a blanket of post-rift sedimentary rocks that are up to 6 km thick beneath the lower continental slope. The COB in this sector is interpreted from the seismic reflection data and potential field modelling to coincide with the base of a basement depression at 8.0–8.5 s two-way time, approximately 170 km oceanwards of the shelf-edge bounding fault system. Oceanic crust in this sector is highly variable in character, from rugged with a relief of more than 1 km over distances of 10–20 km, to rugose with low-amplitude relief set on a long-wavelength undulating basement. The crustal velocity profile appears unusual, with velocities of 7.6–7.95 km s⁻¹ being recorded at several stations at a depth that gives a thickness of crust of only 4 km. If these velocities are from mantle, then the thin crust may be due to the presence of fracture zones. Alternatively, the velocities may be coming from a lower crust that has been heavily altered by the intrusion of mantle rocks. The sector east of 58° E has formed in a normal rifted margin setting, with complexities in the east from the underlying structure of the N–S trending Palaeozoic Lambert Graben. The Napier Complex is downfaulted to depths of 8–10 km beneath the upper continental slope, and the margin rift basin is more than 300 km wide. As in the western sector, the rift-stage rocks are probably relatively thin. This part of the margin is blanketed by post-rift sediments that are up to about 8 km thick. The interpreted COB in the eastern sector is the most prominent boundary in deep water, and typically coincides with a prominent oceanwards step-up in the basement level of up to 1 km. As in the west, the interpretation of this boundary is supported by potential field modelling. The oceanic crust adjacent to the COB in this sector has a highly distinctive character, commonly with (1) a smooth upper surface underlain by short, seaward-dipping flows; (2) a transparent upper crustal layer; (3) a lower crust dominated by dipping high-amplitude reflections that probably reflect intruded or altered shears; (4) a strong reflection Moho, confirmed by seismic refraction modelling; and (5) prominent landward-dipping upper mantle reflections on several adjacent lines. A similar style of oceanic crust is also found in contemporaneous ocean basins that developed between Greater India and Australia–Antarctica west of Bruce Rise on the Antarctic margin, and along the Cuvier margin of northwest Australia.     

Iceland and mid-oceanic ridges

Magnetic anomalies over Iceland, measured by Serson et al. (1968), are similar in shape and amplitude to those found over mid-oceanic ridges in general and over Reykjanes Ridge in particular. However, the geology of Iceland does not favour the simple model of sea floor spreading as formulated by Vine and Matthews. The Brunhes period volcanism can neither in place nor in time be related to an opening process of the Central Graben, which actually is a downthrown block and not an opening rift. Furthermore, the structure of Iceland is not symmetric with respect to the Central Graben. The geology of the Central Graben of Iceland does support a model proposed by Thorleifur Einarsson in 1967. In this model elongate ridges of pillow lavas are thought to have piled up on top of parallel volcanic fissures. The actual spreading is negligible. The fissures have been opening at random over a width of about 120 km, and no definite time scale can be set up for the associated magnetic anomalies. This conflict between Icelandic geology and the current views on sea floor spreading, can be evaded by supposing that the mere circumstance that Iceland is an island obscures a spreading process underneath. One might also postulate that Iceland nevertheless should stand as an example of a mid-oceanic ridge which implies that our ideas on sea floor spreading should be thoroughly revised.