Treatment of vinasse by electrochemical oxidation: evaluating the performance of boron-doped diamond (BDD)-based and dimensionally stable anodes (DSAs)

The removal of colour and organic compounds from vinasses derived from the wine distillery industry was studied using boron-doped diamond-based electrodes and dimensionally stable anodes. The maximum reduction of organic compounds and colour was attained with the use of boron-doped diamond-based electrode after 10 h of operation at a current density of 6.6 mA cm^?2. The current efficiency obtained was about 90% with a specific energy consumption (measured in terms of removal of chemical oxygen demand) of 17 kWh kg^?1 COD removed. The dimensionally stable anodes were capable of removing 6–47% of the organic material and reached 60% decolourisation but with a lower current efficiency (between 85 and 10%) and much higher specific energy consumption values. The anaerobic digestion of vinasse after 1 h of treatment using boron-doped diamond-based electrode showed an effective mineralisation of the organic matter contained in the sample leading to an increase in methane production during anaerobic digestion.     

Orientation effect on ground motion measurement for Mexican subduction earthquakes

The existence of the principal directions of the ground motion based on Arias intensity is well-known. These principal directions do not necessarily coincide with the orientations of recording sensors or with the orientations along which the ground motion parameters such as the peak ground acceleration and the pseudo-spectral acceleration (PSA) are maximum. This is evidenced by the fact that the maximum PSA at different natural vibration periods for horizontal excitations do not correspond to the same orientation. A recent analysis carried out for California earthquake records suggests that an orientation-dependent ground motion measurement for horizontal excitations can be developed. The main objective of this study is to investigate and provide seismic ground motion measurements in the horizontal plane, including bidirectional horizontal ground motions, for Mexican interplate and inslab earthquake records. Extensive statistical analyses of PSA are conducted for the assessment, The analysis results suggest that similar to the case of California records, the average behavior of the ratio of the PSA to the maximum resulting PSA can be approximated by a quarter of an ellipse in one quadrant; and that the ratio can be considered to be independent of the value of the maximum resulting PSA, earthquake magnitude, earthquake distance and the focal depth. Sets of response ratios and attenuation relationships that can be used to represent a bidirectional horizontal ground motion measurement for Mexican interplate and inslab earthquakes were also developed.     

Determining flow patterns and emplacement dynamics from tsunami deposits with no visible sedimentary structure

In the absence of eyewitness reports or clear sedimentary structures, it can be difficult to interpret tsunami deposits or reconstruct tsunami inundation patterns. The emplacement dynamics of two historical tsunami deposits were investigated at seven transects in Okains Bay, New Zealand, using a combined geospatial, geomagnetic and sedimentological approach. The tsunami deposits are present as layers of sand and silt intercalated between soils and become finer and thinner with distance inland. The deposits are attributed to the 1960 and possibly the 1868 tsunamis, based on radiometric dating and correlation with historical records. Measurements of Magnetic Fabric (MF: Anisotropy of Magnetic Susceptibility) and particle size were used to reconstruct the evolution of flow dynamics laterally and vertically. A combination of statistical methods, including spatial autocorrelation testing, Spearman's rank order correlation, Principal Component Analysis (PCA) and K‐means cluster analysis, was applied to examine relationships between MF parameters and sediment texture, and infer depositional hydrodynamics. Flow patterns deduced from MF show the estuary channel acted as a conduit for inundation, with flow commonly aligned sub‐perpendicular to the estuary bed. MF and sediment data suggest deposition occurred from settling during laminar flow. Evidence of both uprush and backwash deposition, as well as wave reflection from infrastructure, was found. Statistical analysis of data showed significant relationships between grain size parameters and MF parameters associated with flow speed and magnetic fabric type. PCA and cluster analysis differentiated samples into two primary hydrodynamic groups: (1) samples deposited from laminar flow; and (2) samples deposited close to the limit of inundation, which includes samples deposited further inland, those affected by flow convergence, and those in the upper part of tsunami deposits. This approach has potential as a tool for reconstructing hydrodynamic conditions for palaeotsunamis and by combining spatial and statistical analyses, large‐scale investigations can be more easily performed. Copyright © 2016 John Wiley & Sons, Ltd.     

Temporal study of estrogenic responses of mussel (Mytilus galloprovinciallis) extracts applied to reporter cell lines

In vitro bioassays would facilitate monitoring of estrogen-like compounds in mussels (Mytilus galloprovincialis) since they tend to accumulate lipophilic compounds in their fat and muscle tissue. However, estradiol (E2) steroid (already identified in mussels) could induce false positive responses. This study focuses on temporal variability in estrogenic responses of mussel extracts and the possible relation of this response with E2 levels. The reproductive cycle and growth were thus monitored for six months in sexed mussels. E2 levels were similar between genders and these levels varied with reproductive stages. human estrogen receptor (hER) activities were similar at all stages except in February. E2 present in male and female extracts accounted for part of the hER activation observed, but no correlation was found between E2 levels and hER activities.     

A discretization and multigrid solver for a Darcy–Stokes system of three dimensional vuggy porous media

We develop a finite element discretization and multigrid solver for a Darcy–Stokes system of three-dimensional vuggy porous media, i.e., porous media with cavities. The finite element method uses low-order mixed finite elements in the Darcy and Stokes domains and special transition elements near the Darcy–Stokes interface to allow for tangential discontinuities implied by the Beavers–Joseph boundary condition. We design a multigrid method to solve the resulting saddle point linear system. The intertwining of the Darcy and Stokes subdomains makes the resulting matrix highly ill-conditioned. The velocity field is very irregular, and its discontinuous tangential component at the Darcy–Stokes interface makes it difficult to define intergrid transfer operators. Our definition is based on mass conservation and the analysis of the orders of magnitude of the solution. The coarser grid equations are defined using the Galerkin method. A new smoother of Uzawa type is developed based on taking an optimal step in a good search direction. Our algorithm has a measured convergence factor independent of the size of the system, at least when there are no disconnected vugs. We study the macroscopic effective permeability of a vuggy medium, showing that the influence of vug orientation; shape; and, most importantly, interconnectivity determine the macroscopic flow properties of the medium. This work was supported by the U.S. National Science Foundation under grants DMS-0074310 and DMS-0417431.     

Fluid–rock interaction at the roots of an Eopaleozoic epithermal system, Sierra Norte de Córdoba, Argentina: Paragenesis, thermometry and fluid sources

A deep epithermal vein system hosted in Late Proterozoic to Cambrian granodiorite has been identified in the Sierra Norte de Córdoba, the easternmost range of the Sierras Pampeanas Orientales of Argentina. The vein swarm extends over an area of 3 km² parallel to a mylonitic belt and formed in fractured granodiorite. Thicknesses of veins are less than 0.5 m and their visible strike length is less than 100 m. Veins are either barren or weakly mineralized in base-metal sulfides. Most veins have mineral associations dominated by calcite and quartz with lesser amounts of chlorite, sericite, pyrite, and minor illite. In other less exposed albite-rich, adularia-bearing veins, chalcopyrite, bornite, galena, sphalerite, chalcocite and covellite may occur. The widespread occurrence of bladed calcite without any petrographic or microthermometric evidence of boiling implies that this particular habit of calcite may also develop under sub-near boiling fluid conditions. Thermometric calculations based on fluid inclusion data, chlorite composition and oxygen isotopes in the quartz–calcite pair, constrain the formation of the system between 300 and 350 °C, at pressures between 42 and 64 MPa (1.5–2.3 km). Stable isotope data suggest that W/R interaction might have been the most probable mechanism of alteration, involving the participation of meteoric fluids; nevertheless, the metallic signature of some weakly mineralized veins as well as intermediate fluid inclusion salinities favor a magmatic input and a mixed origin for the fluids. Textures and mineral associations, as well as the absence of evidence of boiling in fluid inclusions, all suggest that the silica–carbonate vein system formed deeper than typically shallow Au and Ag-bearing boiling solutions. A 485 (±25) Ma lamprophyre dike crosscuts some of these veins locally producing metasomatic reactions and skarn formation, which constrains the age of the hydrothermal system to the Cambrian-Early Ordovician time span.     

Large Aperture Scintillometer Intercomparison Study

Two field studies with six large aperture scintillometers (LASs) were performed using horizontal and slant paths. The accuracy of this novel and increasingly popular technique for measuring sensible heat fluxes was quantified by comparing measurements from different instruments over nearly identical transects. Random errors in LAS measurements were small, since correlation coefficients between adjacent measurements were greater than 0.995. However, for an ideal set-up differences in linear regression slopes of up to 21% were observed with typical inter-instrument differences of 6%. Differences of 10% are typical in more realistic measurement scenarios over homogeneous natural vegetation and different transect heights and locations. Inaccuracies in the optics, which affect the effective aperture diameter, are the most likely explanation for the observed differences.     

On-line recognition of supernova neutrino bursts in the LVD

In this paper we show the capabilities of the Large Volume Detector (INFN Gran Sasso National Laboratory) to identify a neutrino burst associated with a supernova explosion, in the absence of an “external trigger”, e.g., an optical observation. We describe how the detector trigger and event selection have been optimized for this purpose, and we detail the algorithm used for the on-line burst recognition. The on-line sensitivity of the detector is defined and discussed in terms of supernova distance and intensity at the source.