Recovery of groundwater in the Sanriku region contaminated by the tsunami inundation from the 2011 Tohoku earthquake

Many wells in the Sanriku region used as sources for water supply systems were heavily contaminated by the tsunami of the 2011 great Tohoku earthquake on March 11 in 2011. To better understand the nature of the groundwater contamination by the tsunami inundation and to clarify the recovery process of contaminated groundwater at the study wells, groundwater monitoring has been conducted once or twice yearly since early summer in 2011. High and abnormal values of electric conductivity (EC), chloride ion concentration (CIC), Na⁺, Ca⁺, heavy metal ions, and heavier isotopes of the contaminated groundwater were also obtained in April and June 2011. The chemical elements have rapidly and exponentially decreased as a result of effective pumping of the contaminated groundwater from the study wells and because of abundant rainfall in 2011. In April 2015 (about 4 years after the tsunami inundation), the CIC and EC of the contaminated groundwater of two study wells in Minamisanriku town had reached pre-inundation values. The estimated residence times of groundwater of the two study wells were 105–118 days in the full-day pumping stage and 910–1000 days in the daytime-only pumping stage.     

Regional modelling of rainfall-induced runoff using hydrological model by incorporating plant cover effects: case study in Kelantan,Malaysia

The objective of this paper is to develop a spatial temporal runoff modelling of local rainfall patterns effect on the plant cover hilly lands in Kelantan River Basin. Rainfall interception loss based on leaf area index, loss/infiltration on the ground surface, and runoff calculation were considered as the main plant cover effects on the runoff volume. In this regard, a hydrological and geotechnical grid-based regional model (integrated model) was performed using Microsoft Excel^® and GIS framework system for deterministic modelling of rainfall-induced runoff by incorporating plant cover effects. The infiltration process of the current model was integrated with the precipitation distribution method and rainfall interception approach while the runoff analysis of integrated model was employed based on loss/infiltration water on the ground surface with consideration of water interception loss by canopy and the remaining surface water. In the following, the spatial temporal analysis of rainfall-induced runoff was performed using 10 days of hourly rainfall events at the end of December 2014 in Kelantan River Basin. The corresponding changes in pressure head and consequent rate of infiltration were calculated during rainfall events. Subsequently, flood volume is computed using local rainfall patterns, along with water interception loss and the remaining surface water in the study area. The results showed the land cover changes caused significant differences in hydrological response to surface water. The increase in runoff volume of the Kelantan River Basin is as a function of deforestation and urbanization, especially converting the forest area to agricultural land (i.e. rubber and mixed agriculture).     

Oil geochemistry derived from the Qinjiatun–Qikeshu oilfields: insight from light hydrocarbons

A suite of 27 oils from the Qinjiatun–Qikeshu oilfields in the Lishu Fault Depression of the Songliao Basin was analyzed using whole oil gas chromatography. In combination with the relative distribution of C₂₇, C₂₈, and C₂₉ regular steranes, detailed geochemical analyses of light hydrocarbons in oil samples revealed crude oils characterized by the dual input of lower aquatic organisms and higher terrestrial plants. Several light hydrocarbon indicators suggest that the liquid hydrocarbons have maturities equivalent to vitrinite reflectances of around 0.78%–0.93%. This is consistent with the maturity determination of steranes C₂₉ 20S/(20S + 20R) and C₂₉ ααβ/(ααα + αββ). Crude oils derived from the two distinct oilfields likely both have source rocks deposited in a lacustrine environment based on light hydrocarbon parameters and on higher molecular weight hydrocarbon parameters. The results show that light hydrocarbon data in crude oils can provide important information for understanding the geochemical characteristics of the Qinjiatun–Qikeshu oils during geologic evolution.     

Stream Restoration Performance and Its Contribution to the Chesapeake Bay TMDL: Challenges Posed by Climate Change in Urban Areas

In large part driven by total maximum daily load (TMDL) mandates, the restoration community in the Chesapeake Bay region has been implementing novel best management practices (BMPs) and stream restoration designs in urban areas, such as regenerative stream/stormwater conveyance (RSC) structures and stream-wetland complexes (SWCs). However, the nutrient and sediment reduction efficiencies of these novel designs are virtually unknown, and the possibility of increasing riverine flow in the Chesapeake Bay watershed associated with climate change this century necessitates an evaluation of their performance to develop and utilize those that optimize reductions in nutrient and sediment fluxes. We compare pre- and post-construction loads (total nitrogen (TN), total phosphorus (TP), and total suspended solids (TSS)) from RSCs (i.e., upland BMPs) and a SWC (i.e., stream restoration) constructed at the outflow of a highly developed watershed in the Coastal Plain physiographic province of Maryland. The largest of the two RSCs performed best in relation to expected nutrient and sediment reductions because of superior water retention capability. By the length of river reach restored, the SWC attained from 79 to 88% of its N reduction TMDL goal, but only 19 to 23 and 2.7 to 3.1% for TP and TSS, respectively; by watershed area, % attainments of TMDL goals were much lower. Results indicate that SWCs have the potential to curtail N loading from developed catchments, but additional water quality benefits may be limited. Climate change projections indicate that there will be an increased frequency of larger-volume storms that will result in an increase in stormflow runoff from urban areas, and increased pollutant loads will likely curtail potential gains made by efforts to achieve TMDL goals. Given the large-scale implementation of BMPs currently underway to accommodate the Chesapeake Bay TMDL, the restoration community needs to adopt a concerted strategy of building climate resilience into many types of urban BMPs to help attain and maintain loads at TMDL levels in anticipation of a progressively wetter climate throughout this century.     

Calibrating nonparametric cellular automata with a generalized additive model to simulate dynamic urban growth

Understanding factors that drive urban growth is essential to cellular automata (CA) based urban modeling. Multicollinearity among correlated factors may cause negative effects when building CA transition rules, leading to a decrease in simulation accuracy. We use a nonparametric generalized additive model (GAM) to evaluate these relationships through flexible smooth functions to capture the dynamics of urban growth. A GAM-based CA (termed GAM-CA) model was then developed to simulate the rapid urban growth in Shanghai, China from 2000 to 2015. GAM highlights the significance of each candidate factor driving urban growth during the past 15 years. Compared to logistic regression, the GAM-CA transition rules fitted the observed data better and yielded improved overall accuracy and hence more realistic urban growth patterns. The new CA model has great potential for capturing key driving factors to simulate dynamic urban growth, and can predict future scenarios under various spatial constraints and conditions.     

Are real-world shallow landslides reproducible by physically-based models? Four test cases in the Laternser valley,Vorarlberg (Austria)

In contrast to the complex nature of slope failures, physically-based slope stability models rely on simplified representations of landslide geometry. Depending on the modelling approach, landslide geometry is reduced to a slope-parallel layer of infinite length and width (e.g., the infinite slope stability model), a concatenation of rigid bodies (e.g., Janbu’s model), or a 3D representation of the slope failure (e.g., Hovland’s model). In this paper, the applicability of four slope stability models is tested at four shallow landslide sites where information on soil material and landslide geometry is available. Soil samples were collected in the field for conducting respective laboratory tests. Landslide geometry was extracted from pre- and post-event digital terrain models derived from airborne laser scanning. Results for fully saturated conditions suggest that a more complex representation of landslide geometry leads to increasingly stable conditions as predicted by the respective models. Using the maximum landslide depth and the median slope angle of the sliding surfaces, the infinite slope stability model correctly predicts slope failures for all test sites. Applying a 2D model for the slope failures, only two test sites are predicted to fail while the two other remain stable. Based on 3D models, none of the slope failures are predicted correctly. The differing results may be explained by the stabilizing effects of cohesion in shallower parts of the landslides. These parts are better represented in models which include a more detailed landslide geometry. Hence, comparing the results of the applied models, the infinite slope stability model generally yields a lower factor of safety due to the overestimation of landslide depth and volume. This simple approach is considered feasible for computing a regional overview of slope stability. For the local scale, more detailed studies including comprehensive material sampling and testing as well as regolith depth measurements are necessary.     

Petrography and geochemistry of Jurassic sandstones from the Jhuran Formation of Jara dome,Kachchh basin,India: Implications for provenance and tectonic setting

Sandstones of Jhuran Formation from Jara dome, western Kachchh, Gujarat, India were studied for major, trace and rare earth element (REE) geochemistry to deduce their paleo-weathering, tectonic setting, source rock characteristics and provenance. Petrographic analysis shows that sandstones are having quartz grains with minor amount of K-feldspar and lithic fragments in the modal ratio of Q ₈₉:F ₇:L ₄. On the basis of geochemical results, sandstones are classified into arkose, sub-litharenite, wacke and quartz arenite. The corrected CIA values indicate that the weathering at source region was moderate to intense. The distribution of major and REE elements in the samples normalized to upper continental crust (UCC) and chondrite values indicate similar pattern of UCC. The tectonic discrimination diagram based on the elemental concentrations and elemental ratios of Fe₂O₃ + MgOvs. TiO₂, SiO₂ vs. log(K₂O/Na₂O), Sc/Cr vs. La/Y, Th–Sc–Zr/10, La–Th–Sc plots Jhuran Formation samples in continental rift and collision settings. The plots of Ni against TiO₂, La/Sc vs. Th/Co and V–Ni–Th ?10 reveals that the sediments of Jhuran Formation were derived from felsic rock sources. Additionally, the diagram of (Gd/Yb) _N against Eu/Eu ^? suggest the post-Archean provenance as source possibly Nagar Parkar complex for the studied samples.     

Geochemical characterization of groundwater from northeastern part of Nagpur urban,Central India

Hydrogeochemical investigations are carried out in the northeastern part of Nagpur urban to assess the quality of groundwater for its suitability for drinking and irrigation purposes. Groundwater samples are collected from both shallow and deep aquifers to monitor the hydrochemistry of various ions. The groundwater quality of the area is adversely affected by urbanization as indicated by distribution of EC and nitrate. In the groundwater of study area, Ca²⁺ is the most dominant cation and Cl⁻ and HCO₃ ⁻ are the dominant anions. Majority of the samples have total dissolved solids values above desirable limit and most of them belong to very hard type. As compared to deep aquifers, shallow aquifer groundwaters are more polluted and have high concentration of NO₃ ⁻. The analytical results reveal that most of the samples containing high nitrate also have high chloride. Major hydrochemical facies were identified using Piper trilinear diagram. Alkaline earth exceeds alkalis and weak acids exceed strong acids. Shoeller index values reveal that base-exchange reaction exists all over the area. Based on US salinity diagram most of samples belong to high salinity-low sodium type. A comparison of groundwater quality in relation to drinking water standards showed that most of the water samples are not suitable for drinking purpose.     

Iodine-rich waters involved in supergene enrichment of the Mantos de la Luna argentiferous copper deposit,Atacama Desert,Chile

Recent studies have suggested the involvement of highly saline deep formation waters that modified preexisting Cu assemblages to form atacamite during supergene oxidation of Cu deposits in the Atacama region. In this report, we document the occurrence of (Ag–I) inclusions hosted by supergene chalcocite from Mantos de la Luna, an argentiferous Upper Jurassic stratabound Cu deposit in the Coastal Range of northern Chile. The presence of this unusual mineral assemblage indicates that iodargyrite precipitated from reducing iodine-rich waters, suggesting that the fluids involved in supergene enrichment of Cu deposits in the Coastal Range were more complex than previously thought. This suggests the prevalence of hyperarid conditions during the latest stages of supergene enrichment of the Mantos de la Luna Cu deposit in the Atacama region, supporting the notion that supergene enrichment processes in hyperarid areas are dynamic in nature and do not exclusively require the presence of meteoric water.     

Hydrogeology and sustainable future groundwater abstraction from the Agua Verde aquifer in the Atacama Desert,northern Chile

The hyper-arid conditions prevailing in Agua Verde aquifer in northern Chile make this system the most important water source for nearby towns and mining industries. Due to the growing demand for water in this region, recharge is investigated along with the impact of intense pumping activity in this aquifer. A conceptual model of the hydrogeological system is developed and implemented into a two-dimensional groundwater-flow numerical model. To assess the impact of climate change and groundwater extraction, several scenarios are simulated considering variations in both aquifer recharge and withdrawals. The estimated average groundwater lateral recharge from Precordillera (pre-mountain range) is about 4,482 m³/day. The scenarios that consider an increase of water withdrawal show a non-sustainable groundwater consumption leading to an over-exploitation of the resource, because the outflows surpasses inflows, causing storage depletion. The greater the depletion, the larger the impact of recharge reduction caused by the considered future climate change. This result indicates that the combined effects of such factors may have a severe impact on groundwater availability as found in other groundwater-dependent regions located in arid environments. Furthermore, the scenarios that consider a reduction of the extraction flow rate show that it may be possible to partially alleviate the damage already caused to the aquifer by the continuous extractions since 1974, and it can partially counteract climate change impacts on future groundwater availability caused by a decrease in precipitation (and so in recharge), if the desalination plant in Taltal increases its capacity.