Sulfide composition and phase relations in the Fe-Ni-Cu ore deposits of the Ivrea-Verbano basic complex (western Alps,Italy)

The bulk composition, mineralogy and mineral chemistry of base-metal sulfides have been investigated in the Fe-Ni-(Cu) ore deposits of the Ivrea-Verbano basic complex.The sulfide ores mostly display textural evidence of having been primarily deposited as an immiscible melt. Bulk compositions of the ores indicate that considerably low Ni/Fe and Ni/Co ratios are found in deposits developed close to metasedimentary country rocks, possibly as a result of mixing with sedimentary sulfur.Phase relations of primary sulfides indicate that early crystallization of the ore was dominated by a monosulfide solid solution (Mss) with a pyrrhotite composition, from which pentlandite and chalcopyrite were formed through subsolidus exsolution. Pentlandite from contaminated ores is typically enriched in Co. Troilite and hexagonal intermediate pyrrhotite intergrowths frequently occur due to low-temperature equilibration of metal-rich pyrrhotites, suggesting a low S fugacity of the original sulfide melt.The sulfides may be locally mobilized and redeposited along shear zones within the same host rock, giving rise to fairly massive ores having a typical cemented-breccia texture. Bulk composition and assemblages suggest that mobilization occurred at various temperatures during the cooling history of the ore, when sulfides were still in the molten state or at a lower temperature under the influence of abundant deuteric fluids. In this last case, growth of pyrite is seen as being possibly due to sulfurization and/or oxidation.     

Multi-methodological investigation of kunzite, hiddenite, alexandrite, elbaite and topaz, based on laser-induced breakdown spectroscopy and conventional analytical techniques for supporting mineralogical characterization

Gem-quality alexandrite, hiddenite and kunzite, elbaite and topaz minerals were characterized through a multi-methodological investigation based on EMPA-WDS, LA-ICP-MS, and laser-induced breakdown spectroscopy (LIBS). With respect to the others, the latter technique enables a simultaneous multi-elemental composition without any sample preparation and the detection of light elements, such as Li, Be and B. The criteria for the choice of minerals were: (a) the presence of chromophore elements in minor contents and/or as traces; (b) the presence of light lithophile elements (Li, Be and B); (c) different crystal chemistry complexity. The results show that LIBS can be employed in mineralogical studies for the identification and characterization of minerals, and as a fast screening method to determine the chemical composition, including the chromophore and light lithophile elements.     

The mafic-ultramafic complex near Finero (Ivrea-Verbano Zone), II. Geochronology and isotope geochemistry

Whole-rock Nd and Sr isotopic compositions of the mafic-ultramafic complex near Finero demonstrate that the magma was derived from a depleted, perhaps MORB-type mantle reservoir. The Sm-Nd data for the Amphibole Peridotite unit can be interpreted as an isochron with an apparent age of 533 ± 20 Ma, which is consistent with a ²⁰⁷Pb/²⁰⁶Pb evaporation age of 549 ± 12 Ma of a single zircon grain from the Internal Gabbro unit. However, the interpretation of these apparent ages remains open to question. We therefore retain the alternative hypotheses that the intrusion occurred either about 533 or 270 Ma ago, the latter being the most likely age of emplacement of the much larger magma body near Balmuccia (Val Sesia). The implication of the older emplacement age (if correct) would be that the igneous complex may be related to the numerous amphibolite units, which are intercalated with the metapelites of the overlying Kinzigite Formation, and together with them may constitute an accretionary complex. In this case, the mafic-ultramafic complex itself might also be part of such an accretionary complex (as has been proposed for the Balmuccia peridotite).

Internal Sm-Nd isochrons involving grt, cpx, plag and amph from the Internal Gabbro unit yield concordant ages of 231 ± 23, 226 ± 7, 223 ± 10, 214 ± 17, and 203 ± 13 Ma. These results confirm published evidence for a separate, regional heating event about 215 ± 15 Ma ago.

Initial _Nd(533) values average +6.3 ± 0.4 for six samples of the Amphibole Peridotite unit and +6.0 ± 1.2 for ten samples of the External Gabbro unit. ⁸⁷Sr/⁸⁶Sr ratios require little or no age correction and range from 0.7026 to 0.7047 (with two outliers at 0.7053 and 0.7071). Strong correlations between ⁸⁷Sr/⁸⁶Sr and K₂O and weaker correlations between initial _Nd and K₂O imply a comparatively minor (≤ 10%) contamination of the External Gabbro magma by crustal material and a later alteration by a crustal or seawater-derived fluid. These results contrast sharply with the isotopic composition (negative _Nd and high ⁸⁷Sr/⁸⁶Sr values) of the associated mantle rocks, the Phlogopite Peridotite unit, which has been pervasively metasomatized by crustal fluids. This type of metasomatism and its isotopic signature are never seen in the magmatic complex. This evidence rules out any direct genetic relationship between the igneous complex and the mantle peridotite. The crust-mantle interaction is the opposite of that seen at Balmuccia, where the mantle peridotite is essentially ‘pristine’ and the magmatic body has been extensively contaminated by assimilation of crustal rocks.     

Spatial variability of phytoplankton, nutrients and new production estimates in the waters around Svalbard

Phytoplankton dynamics and carbon input into Arctic and sub-Arctic ecosystems were investigated around Svalbard, in summer 1991. Phytoplankton biomass, species composition and dissolved nutrient concentrations were analysed from water samples collected along seven transects. Phytoplankton biomass was low especially to the north (Chlorophyll-a mean 0.3 pg 1- '), where flagellates dominated the communities and only ice-diatoms were present. To the west, the phytoplankton composition was representative of a summer Atlantic community, in a post-bloom state. Zooplankton grazing, mainly by copepods, appeared to be the main control on biomass to the west and north of Svalbard.
In the Barents Sea (east of Svalbard), an ice edge bloom was observed (Chlorophyll-a max. 6.8 pgl-') and the ice edge receded at a rate of approximately 1 1 km day-'. The phytoplankton community was represented by marginal ice species, especially Phaeocystis poucherii and Chaeroceros socialis. South of the ice edge, Deep Chlorophyll Maxima (DCM) were observed, as surface waters became progressively nutrient-depleted. In these surface waters, the phytoplankton were predominantly auto- and heterotrophic flagellates.
Carbon production measurements revealed high net production (new and regenerated) to the north of the Barents Sea Polar Front (BSPF); it was especially high at the receding ice edge (reaching 1.44gC m-'day-'). To the south, a low level of production was maintained, mainly through regenerative processes.     

The Jolomba,Angola LL6 chondrite

Abstract— Accompanied by loud thunder at about 1.30 pm (local time) on 3 February 1974, a single stone weighing approx. 480 g was seen to fall and was recovered near the Jolomba village, Huambo District, Angola. The stone is strongly brecciated, has dark-greyish angular fragments within a lighter matrix and does not exhibit any chondritic textures. Jolomba consists of olivine (Fa 31), orthopyroxene (Fs 25), sodic plagioclase (An 11), sulphides (troilite), very scarce nickel-iron (Ni up to 56%), oxides (chromite and ilmenite) and apatite. Pervasive fracturing of silicates suggests that Jolomba suffered strong brecciation and partial recrystallization. Mineralogy and bulk chemical analysis indicate that Jolomba belongs to the LL group of chondrites (amphoterites). Uniform olivine and pyroxene composition, well-crystallized plagioclase and textural features in general indicate that Jolomba belongs to the petrologic type 6.     

Petrogenesis of the Paleoproterozoic basalt–andesite–rhyolite dyke association in the Carajás region, Amazonian craton

Paleoproterozoic basaltic, andesitic and rhyolitic dykes crosscut the Archaean Carajás basement. Basalts are distinguished into a high and a low TiO₂ group (HTi and LTi), each group consisting of geochemically distinct NE- and NW-trending swarms. The HTi dykes are evolved transitional basalts having essentially EMORB-type geochemistry. The LTi basalts are tholeiites (NE-trending swarm) and high-Al basalts (NW-trending swarm) displaying incompatible trace elements patterns with variably negative Nb anomaly, enrichment in Rb, Ba, K (LILE) and La, Ce and Nd (LREE) and positive Sr anomaly. With respect to orogenic analogues, andesites have lower Al₂O₃, CaO and Ni, higher FeO, LILE, LREE, Nb, Zr and Ti and negative Sr anomaly. Rhyolites have geochemical characteristics comparable with those of A-type granites. At 1.8 Ga, ranges from 0.700 to 0.705 in the HTi basalts and from 0.700 to 0.704 in the LTi group. Andesites define an isochron of 1874±110 Ma (Sr_o=0.7038±0.0010). Rhyolites from Southern and Northern Carajás define two isochrons of 1802±130 Ma (Sr_o=0.7062±0.0046) and 1535±82 Ga (Sr_o=0.7625) respectively, the younger date being interpreted as resetting of the Rb–Sr isotopic system. We propose a petrogenetic model relating LTi basalts with melting of lithospheric mantle metasomatized by acid melts derived from incipient melting of eclogites, representing in turn the subsolidus product of basaltic batches trapped in the mantle. The HTi basalts are explained by melting of the lithospheric mantle containing the complementary residual eclogite. Andesite petrogenesis is consistent with crystal fractionation from a high-Mg andesite parent derived from a mantle source more extensively metasomatized by eclogite-derived melts. Rhyolite composition is consistent with low melting degree of the basement rocks. The basalt–andesite–rhyolite dykes may represent the effects of crustal extension and arching in Carajás, which produced the anorogenic acid to intermediate magmatism (Uatumã group) and affecting a large part of the Amazon craton between 1.85 and 1.7 Ga.     

BeppoSAX observations of GRS 1915+105.

Results from a BeppoSAX observational campaign on GRS 1915+105, performed in October/November 1996, are presented. The source was observed 10 times (nine 10 ksec snapshots, one 100 ksec long observation). The broad band spectral analysis reveals a complex spectrum, including Compton reflection and an iron emission line, probably originating from a relativistic disc.     

On the Lagrangian and Eulerian Time Scales of Turbulence Within a Two-Dimensional Array of Obstacles

Boundary-Layer Meteorology - Fields of Lagrangian ( $$T^{L}$$ ) and Eulerian ( $$T^{E}$$ ) time scales of the turbulence within a regular array of two-dimensional obstacles of unit aspect ratio...     

Problems Related to Lichen Transplants to Monitor Trace Element Deposition in Repeated Surveys: A Case Study from Central Italy

The results of a transplant experiment with the fruticose lichen Evernia prunastri aimed at monitoring the trends of trace elements deposition in a repeated biomonitoring study are reported. Data comparability between the two surveys and interpretation of the results were addressed in this study. The ratio between the concentration of each element after the exposure and in control samples prior to exposure (exposed-to-control ratio, EC ratio), as well as an appropriate interpretative scale, were adopted as a means of determining the temporal trends of element accumulation by lichen transplants. The results showed that the method adopted is indeed a reliable tool, pinpointing a Zn smelting plant and an oil refinery as principal pollution sources in the area, which indicate that elements associated with the former were similarly accumulated in both 2002 and 2003, while elements associated with the latter tended to decrease in 2003.     

Pretunnel technology: applications and design methods

The Pretunnel technology allows the final or preliminary lining to be built ahead of a tunnel face. The paper shows how this technology has been used for mechanizing the full-face excavation of large tunnels in difficult ground conditions with minimum settlements. Analytical methods are presented for the analysis of the lining both in deep and shallow applications. Fields of applicability are established using results of parametric studies based on the methods proposed.