Sea-Spray-Generation Dependence on Wind and Wave Combinations: A Laboratory Study

Boundary-Layer Meteorology - We investigate the effects of wind–wave interactions on the surface sea-spray-generation flux. To this end, the Marine Aerosol Tunnel Experiment (MATE2019) was...     

The effects of surface weathering on the geochemical analysis of archaeological lithic samples using non‐destructive polarized energy dispersive XRF

The purpose of this paper is to show the effects of lithic artifact surface weathering on whole rock non‐destructive polarized energy dispersive X‐ray fluorescence (P‐ED‐XRF) major and trace element determinations. Chemical results for a weathered and subsequently mechanically ground subset of New Hampshire Ossipee archaeological flakes, cataloged as hornfels, show that both groups of elements are variably affected by weathering. A graphic approach is developed and proposed to highlight the role and importance of immobile elements. A case is made and an analytical method is proposed for the routine use of P‐ED‐XRF spectrometers to determine the chemical makeup of lithic artifacts and therefore provide a data set compatible with existing geochemical databases and literature. The use of specific variation diagrams is adopted to portray the weathering trend. Internationally approved geochemical rock type diagrams are used to correct the rock type previously assigned to Ossipee artifacts and in turn narrow down potential quarry sources. © 2011 Wiley Periodicals, Inc.     

Coupes équilibrees crustales : méthodologie et application aux Alpes occidentales

Résumé

La construction de coupes équilibrées à l’échelle de la croûte ainsi que leur remise à l’état avant déformation suivent les règles générales de construction des coupes équilibrées (conservation des longueurs et des surfaces entre l’état avant déformation et l’état actuel), mais présentent des caractères qui leur sont propres (nécessité de connaître les mouvements verticaux importants qui accompagnent les déformations à cette échelle ainsi que le mode de déformation de la croûte).

Un exemple de construction de telles coupes est proposé pour les Alpes occidentales. Ces coupes, équilibrées pour le chevauchement crustal des massifs cristallins externes (Burdigalien-Actuel), traduisent un raccourcissement crustal variant de 10 km environ au niveau du Vercors à 55 km environ au niveau des Préalpes. Elles permettent d’intégrer dans un modèle unique un certain nombre de phénomènes comme le raccourcissement crustal, le raccourcissement dans la couverture, la subsidence du bassin molassique, la surrection des massifs cristallins externes, le rétrodéversement des structures en arrière de ces massifs.     

Example of Neogene tectonic indentation in the Eastern Betic Cordilleras: the Arc of Aguilas (Southeastern Spain)

Abstract

Neogene deformations have deeply disturbed the initial architecture of the pile of nappes within the Eastern Betic zone. The Arc of Aguilas, displaying a southeast-facing concavity, is a spectacular example of such a post-nappe structuration. Miocene deposits involved in the torsion of the Arc provide a chronology of the deformation. The Arc of Aguilas is one element within a system of rigid-plastic indentation including the following units, from the inner (SE) to the outer (NW) zones : — A rigid block, little deformed, located in the present day abyssal plain, play the part of the indenter.

— A structural pad corresponding to the Aguilas Arc itself. It was severely folded during Miocene times.

— A large peripheral zone mainly subjected to faulting during the Neogene (essentially strike-slip faults). These faults control the evolution of different types of sedimentary basins during the Late Neogene (Tortonian to Pliocene).

Two large shear zones: N020 sinistral (Palomares and Terreros faults), N100 dextral (Las Moreras faults) guided the deformation of the Aguilas Arc within a compressive stressfield of which major tensor axis oscillated between NW-SE and N-S.     

Influence of plankton concentration on gametogenesis and spawning of the black lip pearl oyster Pinctada margaritifera in Ahe atoll lagoon (Tuamotu archipelago, French polynesia)

Pearl culture industry represents one of the dominant business sector of French Polynesia. However, it still entirely relies on unpredictable spat collection success. Our aim was to assess the influence of natural plankton concentration fluctuations on maturation and spawning of the black lip pearl oyster Pinctada margaritifera, during a 4months survey conducted in Ahe atoll lagoon. Plankton concentration was assessed by chlorophyll a extraction and by microscope counts while gonadic index, gonado-visceral dry weights and histology were used to measure pearl oysters reproduction activity. We found that (i) plankton concentration fluctuations were mainly related to wind regime, (ii) gametogenesis rate was mainly related to plankton concentration, (iii) spawning occurred when maximal gonad storage was reached, (iv) plankton concentration was the main spawning synchronizing factor. These results contribute explaining P. margaritifera spat collection variability in French Polynesian atoll lagoon.     

Unraveling the patterns of late Holocene debris-flow activity on a cone in the Swiss Alps: Chronology, environment and implications for the future

Debris-flow activity on the forested cone of the Ritigraben torrent (Valais, Swiss Alps) was assessed from growth disturbances in century-old trees, providing an unusually complete record of past events and deposition of material. The study of 2246 tree-ring sequences sampled from 1102 Larix decidua Mill., Picea abies (L.) Karst. and Pinus cembra ssp. sibirica trees allowed reconstruction of 123 events since AD 1566. Geomorphic mapping permitted identification of 769 features related to past debris-flow activity on the intermediate cone. The features inventoried in the study area covering 32 ha included 291 lobes, 465 levées and 13 well-developed debris-flow channels. Based on tree-ring records of disturbed trees growing in or next to the deposits, almost 86% of the lobes identified on the present-day surface could be dated. A majority of the dated material was deposited over the last century. Signs of pre-20th century events are often recognizable in the tree-ring record of survivor trees, but the material that caused the growth anomaly in trees has been completely overridden or eroded by more recent debris-flow activity.Tree-ring records suggest that cool summers with frequent snowfalls at higher elevations regularly prevented the release of debris flows between the 1570s and 1860s; the warming trend combined with greater precipitation totals in summer and autumn between 1864 and 1895 provided conditions that were increasingly favorable for releasing events from the source zone. Enhanced debris-flow activity continued well into the 20th century and reconstructions show a clustering of events in the period 1916–1935 when warm–wet conditions prevailed during summer in the Swiss Alps. In contrast, very low activity is observed for the last 10-yr period (1996–2005) with only one debris-flow event recorded on August 27, 2002. Since sediment availability is not a limiting factor, this temporal absence of debris-flow activity is due to an absence of triggering events, which not only shifted from June and July to August and September over the 20th century, but also seemed to be initiated primarily by persistent precipitation rather than summer thunderstorms. From the reconstructions, based on RCM simulations, there are indications that debris-flow frequencies might continue to decrease in the future, as precipitation events are projected to occur less frequently in summer but become more common in spring or autumn.     

High-pressure yield strength of rocksalt structures using quartz Raman piezometry

The Raman frequencies of quartz are used to evaluate deviatoric stresses in rocksalt-structure media in diamond-anvil cell experiments to pressures up to 20 GPa. The piezospectroscopic effect in quartz is modeled by first-principles calculations. Non-hydrostatic stresses measured in halogen salts give yield strength estimates of 3 GPa in the B1 structure (NaCl), and 4.5 GPa for the B2 structure (KCl and KBr). Raman measurements in MgO show that the yield strength is reached at around 6 ± 1 GPa. Measurements on quartz alone indicate similar yield strength. The estimated yield strength in MgO is thus likely a lower bound, in consistency with former radial X-ray diffraction measurements that gave a yield strength of 8 ± 1 GPa, and lower-pressure large-volume press experiments indicating a yield strength of 6 GPa at 5 GPa. Former values of the yield strength below 2 GPa determined by pressure gradient measurements were underestimated due to unverified assumptions in boundary conditions. The yield strength increases with increasing coordination of ionic solids, likely contributing to increase viscosity at phase transitions near the upper–lower mantle boundary.     

Thermodynamic properties of chlorite CCa-2. Heat capacities, heat contents and entropies

The heat capacities of the international reference clay mineral chlorite CCa-2 from Flagstaff Hill, California, were measured by low temperature adiabatic calorimetry and differential scanning calorimetry, from 5 to 520 K (at 1 bar). The studied chlorite is a Fe-bearing trioctahedral chlorite with an intermediary composition between ideal clinochlore (Si₃Al)(Mg₅Al)O₁₀(OH)₈ and chamosite (Si₃Al)(Fe₅Al)O₁₀(OH)₈. Only few TiO₂ impurities were detected in the natural chlorite sample CCa-2. Its structural formula, obtained after subtracting the remaining TiO₂ impurities, is (Si_2.633Al_1.367)(Al_1.116Mg_2.952Mn_0.012Ca_0.011)O₁₀(OH)₈. From the heat capacity results, the entropy, standard entropy of formation and heat content of the chlorite were deduced. At 298.15 K, the heat capacity of the chlorite is 547.02 (±0.27) J mol⁻¹ K⁻¹ and the molar entropy is 469.4 (±2.9) J mol⁻¹ K⁻¹. The standard molar entropy of formation of the clay mineral from the elements is −2169.4 (±4.0) J mol⁻¹ K⁻¹.     

The missing half of the subduction factory: shipboard results from the Izu rear arc,IODP Expedition 350

IODP Expedition 350 was the first to be drilled in the rear part of the Izu-Bonin, although several sites had been drilled in the arc axis to fore-arc region; the scientific objective was to understand the evolution of the Izu rear arc, by drilling a deep-water volcaniclastic section with a long temporal record (Site U1437). The Izu rear arc is dominated by a series of basaltic to dacitic seamount chains up to ~100-km long roughly perpendicular to the arc front. Dredge samples from these are geochemically distinct from arc front rocks, and drilling was undertaken to understand this arc asymmetry. Site U1437 lies in an ~20-km-wide basin between two rear arc seamount chains, ~90-km west of the arc front, and was drilled to 1804 m below the sea floor (mbsf) with excellent recovery. We expected to drill a volcaniclastic apron, but the section is much more mud-rich than expected (~60%), and the remaining fraction of the section is much finer-grained than predicted from its position within the Izu arc, composed half of ashes/tuffs, and half of lapilli tuffs of fine grain size (clasts <3 cm). Volcanic blocks (>6.4 cm) are only sparsely scattered through the lowermost 25% of the section, and only one igneous unit was encountered, a rhyolite peperite intrusion at ~1390 mbsf. The lowest biostratigaphic datum is at 867 mbsf (~6.5 Ma), the lowest palaeomagnetic datum is at ~1300 mbsf (~9 Ma), and the rhyolite peperite at ~1390 mbsf has yielded a U–Pb zircon concordia intercept age of (13.6 + 1.6/?1.7) Ma. Both arc front and rear arc sources contributed to the fine-grained (distal) tephras of the upper 1320 m, but the coarse-grained (proximal) volcaniclastics in the lowest 25% of the section are geochemically similar to the arc front, suggesting arc asymmetry is not recorded in rocks older than ~13 Ma.     

Monitoring water flow in a clay-shale hillslope from geophysical data fusion based on a fuzzy logic approach

Seismic and electrical resistivity tomography allow subsurface characterization from acoustic P-waves (Vp), shear S-waves (Vs) velocities, and electrical resistivity (ρ). Both geophysical methods were used to monitor water flow during a controlled rainfall experiment on a clay-shale hillslope located in the Laval catchment at Draix (Alpes-de-Haute-Provence, France). The objectives of the rainfall experiment were to analyse the water infiltration processes and identify possible water pathways by combining multi-method observations. The seismic data provide information on fissure density and the electrical resistivity data provide information on soil water content within the hillslope. Changes of the Vp and electrical resistivity fields with time show some similar pattern. To go further in the analysis of the water flow a geophysical data fusion strategy based on fuzzy set theory is applied. The computed fuzzy cross-sections based on expert hypotheses show the possibility for the material to be saturated during the rainfall experiment. The data fusion process is repeated in time for each acquisition set. The relative difference between the obtained fuzzy cross-sections is calculated and reveals possible locations where water may be transferred within the hillslope.