Moonquakes and lunar tectonism

With the succesful installation of a geophysical station at Hadley Rille, on July 31, 1971, on the Apollo 15 mission, and the continued operation of stations 12 and 14 approximately 1100 km SW, the Apollo program for the first time achieved a network of seismic stations on the lunar surface. A network of at least three stations is essential for the location of natural events on the Moon. Thus, the establishment of this network was one of the most important milestones in the geophysical exploration of the Moon. The major discoveries that have resulted to date from the analysis of seismic data from this network can be summarized as follows:

1. Lunar seismic signals differ greatly from typical terrestrial seismic signals. It now appears that this can be explained almost entirely by the presence of a thin dry, heterogeneous layer which blankets the Moon to a probable depth of few km with a maximum possible depth of about 20 km. Seismic waves are highly scattered in this zone. Seismic wave propagation within the lunar interior, below the scattering zone, is highly efficient. As a result, it is probable that meteoroid impact signals are being received from the entire lunar surface.
2. The Moon possesses a crust and a mantle, at least in the region of the Apollo 12 and 14 stations. The thickness of the crust is between 55 and 70 km and may consist of two layers. The contrast in elastic properties of the rocks which comprise these major structural units is at least as great as that which exists between the crust and mantle of the earth. (See Toks?zet al., p. 490, for further discussion of seismic evidence of a lunar crust.)
3. Natural lunar events detected by the Apollo seismic network are moonquakes and meteoroid impacts. The average rate of release of seismic energy from moonquakes is far below that of the Earth. Although present data do not permit a completely unambiguous interpretation, the best solution obtainable places the most active moonquake focus at a depth of 800 km; slightly deeper than any known earthquake. These moonquakes occur in monthly cycles; triggered by lunar tides. There are at least 10 zones within which the repeating moonquakes originate.
4. In addition to the repeating moonquakes, moonquake ‘swarms’ have been discovered. During periods of swarm activity, events may occur as frequently as one event every two hours over intervals lasting several days. The source of these swarms is unknown at present. The occurrence of moonquake swarms also appears to be related to lunar tides; although, it is too soon to be certain of this point.

These findings have been discussed in eight previous papers (Lathamet al., 1969, 1970, 1971) The instrument has been described by Lathamet al. (1969) and Sutton and Latham (1964). The locations of the seismic stations are shown in Figure 1.     

Radiative transfer in spherical shell atmospheres: I. Rayleigh scattering

A comparison is made between the plane-parallel approximation and the more realistic spherical shell approximation for the radiance reflected from a planetary atmosphere. In this paper we have considered a planet of radius 6371 km (the Earth) with a homogeneous, conservative, Rayleigh scattering atmosphere extending to a height of 100 km. We have found significant departures from the plane-parallel approximation. Radiance versus height distributions for both single and multiple scattering are presented. Results are presented for the fractional radiance from altitudes in the atmosphere which contribute to the total unidirectional reflected radiance at the top of the atmosphere. We have referred to this as the radiance versus height distribution in the sequel. These data will be very useful for both remote sensing applications and planetary spectroscopy. We have also found that gross violations of the principle of reciprocity do occur in the spherical shell approximation.     

New 1982 — 1990 photometry of λ Andromedae and its 11-year cycle

We present photoelectric photometry of λ And never before published, obtained between February 1982 and December 1990 at 29 different observatories. Then we combine it with all other photometry available to us (previously published, contained in the I.A.U. Commission 27 Archives, and obtained with the Vanderbilt 16-inch automatic telescope but not yet published), to yield a 14.8-year data base. Analysis reveals a long-term cycle in mean brightness, with a full range of 0^m.15 and a period of 11.4 ± 0.4 years. Because most of our new photometry was concentrated in the 1983-84 observing season, we analyze that one well-defined light curve with a two-spot model. Spot A keeps a 0^m.04 amplitude throughout four rotation cycles whereas the amplitude of spot B diminishes from 0^m.09 down almost to 0^m.03. The spot rotation periods were 55^d.9 ± 0^d.6 and 520^d.8 ± 1^d.0, respectively.     

Hypervelocity capture of meteoritic particles in nonsilica aerogels

Abstract– The Stardust mission captured particles from the comet 81P/Wild 2 in gradient density silica aerogel and returned the collected samples to earth in 2006. The analyses of these particles have revealed several new insights into the formation of our solar system. However, since the aerogel used as the capture material was silica, the elemental analyses of the silica‐rich particles were made more complicated in certain ways due to the mixing of the silicon of the particles and that of the aerogel. By using a nonsilica aerogel, future elemental analyses of silica–rich particles captured in aerogel could be made more straightforward. Resorcinol/formaldehyde (RF), alumina, and zirconia aerogels were impact tested with meteoritic fragments and the captured fragments were mapped with synchrotron‐based X‐ray microprobe (XRM) and the particles were analyzed with X‐ray fluorescence (XRF). The resorcinol/formaldehyde aerogel proved to be the best capture material, in that it could be keystoned and XRF could be used to locate and analyze particles that were less than 10 μm.     

VLBI at the Hartebeesthoek radio astronomy Observatory

The Hartebeesthoek Radio Astronomy Observatory has played a key role in the development of very long baseline interferometry (VLBI) in the southern hemisphere since 1971. This paper describes how the VLBI programme evolved and the instrumentation used. Contributions to high resolution mapping of compact radio sources are described, for both the Southern Hemisphere VLBI Experiment, SHEVE, and for Global networks, where HartRAO has made significant improvements in the N-S resolution. The unique geographical location of the telescope has been used to establish the terrestrial reference frame in the southern hemisphere and to measure tectonic motions over the past nine years. The Observatory has also been a fundamental station in extending the celestial reference frame defined by extragalactic radio sources to the southern hemisphere, and results of these programmes are given.     

Dimensionless measures of turbulent magnetohydrodynamic dissipation rates

The magnetic Reynolds number, R _M, is defined as the product of a characteristic scale and associated flow speed divided by the microphysical magnetic diffusivity. For laminar flows, R _M also approximates the ratio of advective to dissipative terms in the total magnetic energy equation, but for turbulent flows this latter ratio depends on the energy spectra and approaches unity in a steady state. To generalize for flows of arbitrary spectra we define an effective magnetic dissipation number,   R _M,e  , as the ratio of the advection to microphysical dissipation terms in the total magnetic energy equation, incorporating the full spectrum of scales, arbitrary magnetic Prandtl numbers, and distinct pairs of inner and outer scales for magnetic and kinetic spectra. As expected, for a substantial parameter range   R _M,e∼ O (1) ≪ R _M  . We also distinguish   R _M,e  from     where the latter is an effective magnetic Reynolds number for the mean magnetic field equation when a turbulent diffusivity is explicitly imposed as a closure. That   R _M,e  and     approach unity even if   R _M≫ 1  highlights that, just as in hydrodynamic turbulence, energy dissipation of large-scale structures in turbulent flows via a cascade can be much faster than the dissipation of large-scale structures in laminar flows. This illustrates that the rate of energy dissipation by magnetic reconnection is much faster in turbulent flows, and much less sensitive to microphysical reconnection rates compared to laminar flows.     

Uplift and submarine formation of some Melanesian porphyry copper deposits: Stable isotope evidence

Hydrogen and oxygen isotope analyses of sericites and kaolinites from four young porphyry copper deposits (Ok Tedi (1.2 Ma) and Yandera (6.5 Ma), Papua New Guinea; Koloula (1.5 Ma), Solomon Islands; and Waisoi (<5 Ma), Fiji) indicate that the fluids from which these minerals precipitated were of mixed magmatic and non-magmatic sources. The non-magmatic component of the fluid from the island arc deposits (Koloula, Waisoi) was ocean water.For Ok Tedi, the non-magmatic component was a meteoric water with an isotopic composition different from that of the present meteoric water in the region. The isotopic signature of the former meteoric water is consistent with a surface elevation of 200 m a.s.l. or less at the time of mineralization. The deposit was later exposed and supergene kaolinitization commenced at approximately 1200 m a.s.l. Uplift and erosion has continued to the present at which time the elevation of the exposed deposit is 1800 m a.s.l. This rate of uplift is consistent with that known from other geological evidence. If the rate of uplift were approximately constant during the last 1.2 Ma, the age of supergene enrichment can be dated at approximately 0.4 Ma B.P.Similarly, influx of meteoric water at Yandera occurred when the ground surface above the deposit was at an elevation of approximately 600 m a.s.l. The deposit's present elevation is 1600 m a.s.l. In this case a total uplift of approximately 2.2 km is indicated, with removal of 1.2 km of overburden by erosion.     

Brans-Dicke cosmology,II

We discuss the implications of the Brans-Dicke scalar-tensor theory for cosmology with particular emphasis on the primordial element abundances that would obtain. Two general classes of models are found. Models of one class expand through the nuclear burning stage slightly more rapidly than the general relativistic case: models of the other class may expand at any rate whatsoever. The first class of models yeilds primordial abundances of D, He³ and He⁴ in agreement with their general relativistic values if the present mass density is low. High-density cosmologies, however, would produce too much He⁴. The second class of models yields element abundances which are far too high unless the expansion rate was quite large: in this case no He⁴ at all is produced. Finally, we determine the rate of change of the constant of gravitationG at the present epoch. For all but a very small class of models is negative at the present epoch. Models with positive values of at the present epoch produce no primordial He⁴ whatsoever, and have ages significantly lower than the corresponding general relativistic ages.     

Contrasting interactions of sodium and potassium with H<Subscript>2</Subscript>O in haplogranitic liquids and glasses at 200 MPa from hydration–diffusion experiments

This study examines hydration–diffusion in the metaluminous haplogranite system at 200 MPa H₂O and 800–300°C. At 800°C hydration is accompanied by melting and uphill diffusion of sodium from anhydrous glass toward the region of hydration and melting, whereas potassium diffuses away from the hydration front and into anhydrous glass. Silicon and aluminum are simply diluted upon hydration. There is no change in molecular Al/(Na + K) throughout the entire hydration-diffusion aureole and, therefore, (1) there is no loss of alkalis to the vapor, and (2) K migrates to replace Na in order to maintain local charge balance required by ^IVAl. Alkali diffusion occurs over a viscosity contrast from 10^4.1 Pa s in hydrous liquid to 10^11.8–10^13.5 Pa s in anhydrous glass. From these results, we interpret that: (1) Na is structurally or energetically favored over K as a charge-balancing cation for ^IVAl in hydrous granitic liquids, whereas the opposite behavior has been observed for anhydrous melts, and (2) the diffusion of alkalis through silicate melts is largely independent of viscosity. Results from 600°C are similar to those at 800°C, but hydration at 300°C involves a loss of Na and concomitant increase in molar Al/(Na + K) in the hydration zone due to hydrogen-alkali exchange between fluid and glass. Hydration behavior at 400°C is transitional between those at 300°C and 600°C, suggesting that the change in hydration mechanism occurs near the glass transition.     

Experiments on the kinetics of partial melting of a leucogranite at 200 MPa H<Subscript>2</Subscript>O and 690–800°C: compositional variability of melts during the onset of H<Subscript>2</Subscript>O-saturated crustal anatexis

We have experimentally investigated the kinetics of melting of an aplitic leucogranite (quartz+sodic plagioclase of ≈Ab₉₀+K-feldspar+traces of biotite) at 690, 740, and 800°C, all at 200 MPa H₂O. Leucogranite cylinders, 3.5 mm in diameter and 7 mm in length, were run in the presence of excess H₂O using cold-seal pressure vessels for 11–2,925 h. At 690 and 740°C and any experimental time, and 800°C and short run times, silicate glass (melt at run conditions) occurs as interconnected films along most of the mineral boundaries and in fractures, with the predominant volume occurring along quartz/feldspars boundaries and quartz/plagioclase/K-feldspar triple junctions. Glass film thickness is roughly constant throughout a given experimental charge and increases with experimental temperature and run duration. The results indicate that H₂O-saturated partial melting of a quartzo-feldspathic protolith will produce an interconnected melt phase even at very low degrees (<5 vol%) of partial melting. Crystal grain boundaries are therefore completely occluded with melt films even at the lowest degrees of partial melting, resulting in a change in the mechanism of mass transport through the rock from advection of aqueous vapor to diffusion through silicate melt. At 690 and 740°C the compositions of glasses are homogeneous and (at both temperatures) close to, but not on, the H₂O-saturated 200 MPa haplogranite eutectic; glass compositions do not change with run duration. At 800°C glasses are heterogeneous and plot away from the minimum, although their molar ratios ASI (=mol Al₂O₃/CaO+Na₂O+K₂O) and Al/Na are constant throughout the entire charge at any experimental time. Glass compositions within individual 800°C experiments form linear trends in (wt%) normative quartz–albite–orthoclase space. The linear trends are oriented perpendicular to the 200 MPa H₂O haplogranite cotectic line, reflecting nearly constant albite/orthoclase ratio versus variable quartz/feldspar ratio, and have endpoints between the 800°C isotherms on the quartz and feldspar liquidus surfaces. With increasing experimental duration the trends migrate from the potassic side of the minimum toward the bulk rock composition located on the sodic side, due to more rapid (and complete) dissolution of K-feldspar relative to plagioclase. The results indicate that partial melting at or slightly above the solidus (690–740°C) is interface reaction-controlled, and produces disequilibrium melts of near-minimum composition that persist metastably for up to at least 3 months. Relict feldspars show no change in composition or texture, and equilibration between melt and feldspars might take from a few to tens of millions of years. Partial melting at temperatures well above the solidus (800°C) produces heterogeneous, disequilibrium liquids whose compositions are determined by the diffusive transport properties of the melt and local equilibrium with neighboring mineral phases. Feldspars recrystallize and change composition rapidly. Partial melting and equilibration between liquids and feldspars might take from a few to tens of years (H₂O-saturated conditions) at these temperatures well above the solidus.