High-resolution spectroscopy of gamma-ray bursts

We report on results from the Goddard germanium Gamma-Ray Burst Spectrometer flown on the ISEE-3 spacecraft. Spectral and temporal studies of two events on 4 and 19 November, 1978 are presented. The power law spectral indices were found to be respectively –1.82 and –1.31, the latter being the hardest event thus far detected. Evidence for two lines in the 4 November event is presented — a broad feature at 420 keV and a narrower one at 740 keV. These are consistent with a common redshift if the parent lines are assumed to be the positron annihilation line (511 keV) and the first excited state of iron (847 keV). If this interpretation is correct, it is shown that additional lines from higher levels of iron and possibly other nuclei are expected and that they may represent a significant contribution to the total spectrum above 1 MeV.Paper presented at the Symposium on Cosmic-Ray Bursts, held at Toulouse, France, 26–29 November, 1979.     

Comparison of cell- and vertex-centered discretization methods for flow in a two-dimensional discrete-fracture–matrix system

Simulations of flow for a discrete-fracture model in fractured porous rocks have gradually become more practical, as a consequence of increased computer power and improved simulation and characterization techniques. Discrete-fracture models can be formulated in a lower-dimensional framework, where the fractures are modeled in a lower dimension than the matrix, or in an equi-dimensional form, where the fractures and the matrix have the same dimension.     

EVIDENCE FOR THE PRESENCE OF LOW MOLECULAR WEIGHT ALCOHOLS AND CARBONYL COMPOUNDS IN THE MURCHISON METEORITE†

Alcohols, aldehydes and ketones identified in the Murchison C2 chondrite include: methanol, ethanol, 2-propanol, butyl alcohols, formaldehyde, acetaldehyde, propionaldehyde, acetone, 2-butanone, 3-pentanone and 2-pentanone.     

The influence of minerals on the pyrolysis of kerogens

The effect of mineral matter on the laboratory pyrolysis of sediments, kerogens and coals, and of coal macerals mixed with either alumina, bentonite, kaolinite, or calcium carbonate has been investigated. Some minerals are more active than others in effecting changes in the composition of the pyrolysate. The relative content of low molecular weight pyrolysis products is higher for kerogens pyrolyzed in a mineral matrix than for isolated kerogens. Our limited data suggests that this is due to both condensation and gasification of higher molecular weight constituents in the ‘primary’ pyrolysate. Differences in the content of aromatic versus aliphatic compounds have been noted when pyrograms from coal macerals are compared with pyrograms from coal maceral-mineral mixtures. We conclude that mineralogy is important in controlling the composition of kerogen pyrolysis products.     

Coherent integration time limit of a mobile receiver for indoor GNSS applications

There is an emerging requirement for processing global navigation satellite system (GNSS) signals indoor where the signal is very weak and subjected to spatial fading. Typically, longer coherent integration intervals provide the additional processing gain required for the detection and processing of such weak signals. However, the arbitrary physical motion of the handset imputed by the user limits the effectiveness of longer coherent integration intervals due to the spatial decorrelation of the multipath-faded GNSS signal. In this paper, limits of coherent integration due to spatial decorrelation are derived and corroborated with experimental verification. A general result is that the processing gain resulting from direct coherent integration saturates after the antenna has moved through a certain distance, which for typical indoor propagation, is about half a carrier wavelength. However, a refined Doppler search coupled with a prolonged coherent integration interval extends this limit, which is effectively a manifestation of selective diversity.     

Gravity anomaly modeling of sedimentary basins by means of multiple structures and exponential density contrast-depth variations: A space domain approach

An automatic modeling scheme is developed in the space domain to interpret the gravity anomalies of sedimentary basins, among which the density contrast decreases exponentially with depth. Forward modeling is realized in the space domain using a combination of both analytical and numerical approaches. A collage of vertical prisms having equal widths, whose depths are to be estimated, describes the geometry of a sedimentary basin. Initial depths of a sedimentary basin are predicted using the Bouguer slab formula and subsequently updated, iteratively, based on the differences between the observed and theoretical gravity anomalies until the modeled gravity anomalies mimic the observed ones. The validity and applicability of the method is demonstrated with a synthetic and two real field gravity anomalies, one each over the Chintalpudi sub-basin in India and the other over the San Jacinto graben, California. In case of synthetic example, the assumed structure resembles a typical intracratonic rift basin formed by normal block faulting and filled with thick section of sediments. The proposed modeling technique yielded information that is consistent with the assumed parameters in the case of synthetic structure and with the available/drilling depths in case of field examples.     

Harmonic analysis of cosmic microwave background data – I. Ring reductions and point-source catalogue

We present a harmonic model for the data analysis of an all-sky cosmic microwave background survey, such as Planck , where the survey is obtained through ring-scans of the sky. In this model, resampling and pixelization of the data are avoided. The spherical transforms of the sky at each frequency, in total intensity and polarization, as well as the bright-point-source catalogue, are derived directly from the data reduced on to the rings. Formal errors and the most significant correlation coefficients for the spherical transforms of the frequency maps are preserved. A clean and transparent path from the original samplings in the time domain to the final scientific products is thus obtained. The data analysis is largely based on Fourier analysis of rings; the positional stability of the instrument's spin axis during these scans is a requirement for the data model and is investigated here for the Planck satellite. Brighter point sources are recognized and extracted as part of the ring reductions and, on the basis of accumulated data, used to build the bright-point-source catalogue. The analysis of the rings is performed in an iterative loop, involving a range of geometric and detector response calibrations. The geometric calibrations are used to reconstruct the paths of the detectors over the sky during a scan and the phase offsets between scans of different detectors; the response calibrations eliminate short- and long-term variations in detector response. Point-source information may allow the reconstruction of the beam profile. The reconstructed spherical transforms of the sky in each frequency channel form the input to the subsequent analysis stages. Although the methods in this paper were developed with the data processing for the Planck satellite in mind, there are many aspects which have wider implementation possibilities, including the construction of real-space pixelized maps.     

Geochemical transport modelling of drainage from experimental mine tailings cells covered by capillary barriers

The use of covers with capillary barrier effects (CCBEs) for reducing acid mine drainage (AMD) from sulphidic mine tailings is simulated using the MIN3P finite volume model for coupled groundwater flow, O₂ diffusion and multi-component reactive transport. The model is applied to simulate five pilot-scale in situ test cells containing reactive tailings from the Manitou mine site, Val d’Or, Que., Canada. Four of the cells were constructed with CCBEs over the tailings, while the fifth tailings cell was left uncovered. Observed and simulated discharge from the base of each cell showed that the capillary barrier covers significantly reduced sulphide oxidation and AMD. Compared to acidic discharge from the uncovered cell, discharge from the four CCBE-covered cells had neutral pH levels and 1–7 orders of magnitude lower concentrations of SO₄, Fe, Zn, Cu and Al. The simulations showed that the moisture retaining layer of the CCBEs reduced AMD by inhibiting O₂ diffusion into the underlying reactive wastes. Provided the moisture-retention layer of the CCBE remains close to saturation, its thickness had a relatively minor effect. Under such near-saturated conditions, O₂ availability is limited by its diffusion rate through the bulk porous medium and not by the diffusion rate through the oxidized grain shells. The model is providing important new insights for comparing design alternatives for reducing or controlling AMD.     

用天然地震探测青藏高原中部地壳、上地幔结构

从西藏南部的定日、嘎拉至青海铜铁山的天然地震探测剖面,实际路线长约２０００ｋｍ,布设了约１１０台便携地震仪,记录了数百次远震和近震事件,采用多种方法进行了资料处理与解释．依据ＳＫＳ,ＰＫＳ,ｐｓ等横波分裂特征计算的青藏高原中部上地幔的地震各向异性表明：研究区各构造单元内的地震各向异性有明显变化,发现上地幔各向异性快速波的偏振方向与造山带的走向不完全一致．在雅江缝合线、崩错－嘉黎、唐古拉山口、昆仑山口几条断裂带处南、北各向异性出现显著的差异,而金沙江缝合线和班公－怒江缝合线的南、北则没有明显的各向异性变化．由Ｐ波走时残差,利用层析技术反演了４００ｋｍ深度内的速度图像,可以看出近地表１００ｋｍ范围内速度的不均匀变化与地表划分的构造单元很吻合,进一步佐证了青藏高原是由不同时期的微板块拼合而成的认识．在青藏高原中部１５０ｋｍ深度以下发现了多处低速区．在金沙江缝合带下方约２００ｋｍ深度处有一长２５０ｋｍ以上、延伸１５０ｋｍ的低速体,推测可能是一地幔柱．利用ＰＳ转换波划分的界面,显示出青藏高原北部具有低速层和高速层交替出现的地壳结构．     

Non-static conformally flat spherically symmetric perfect fluid distribution in Einstein-Cartan theory

In this paper we have obtained general solution representing conformally-flat, non-static spherically-symmetric perfect fluid distribution in Einstein-Cartan theory. In particular, the solution has been also discussed in co-moving coordinates. The explicit expressions for pressure, density, expansion, rotation, shear and non-vanishing components of flow vector have also been found.