Preliminary Results from the Magnetic Field Measurements Using MAGDAS at Ilorin, Nigeria

MAGDAS, the Magnetic Data Acquisition System, was successfully installed at the University of Ilorin, Nigeria—an equatorial station—in August 2006. MAGDAS is an important component of the International Heliophysical Year, IHY. We examined the preliminary results obtained from the analysis of the geomagnetic data obtained from the MAGDAS measurement. Diurnal variations of the solar quiet daily variation in the three geomagnetic elements, H, D, Z were studied. The obtained signatures of the magnetic field variations were discussed in the context of the literature. The day-to-day variability of the horizontal and vertical intensities as well as the declination of the geomagnetic field were examined. The study justified the need for a partner magnetic field observatory along same meridian as Ilorin, north or south of it, to facilitate synthesis of the equatorial electrojet effect.     

An HLLC Riemann solver for relativistic flows – II. Magnetohydrodynamics

An approximate Riemann solver for the equations of relativistic magnetohydrodynamics (RMHD) is derived. The Harten–Lax–van Leer contact wave (HLLC) solver, originally developed by Toro, Spruce and Spears, generalizes the algorithm described in a previous paper to the case where magnetic fields are present. The solution to the Riemann problem is approximated by two constant states bounded by two fast shocks and separated by a tangential wave. The scheme is Jacobian-free, in the sense that it avoids the expensive characteristic decomposition of the RMHD equations and it improves over the HLL scheme by restoring the missing contact wave.
Multidimensional integration proceeds via the single step, corner transport upwind (CTU) method of Colella, combined with the constrained transport (CT) algorithm to preserve divergence-free magnetic fields. The resulting numerical scheme is simple to implement, efficient and suitable for a general equation of state. The robustness of the new algorithm is validated against one- and two-dimensional numerical test problems.     

Micromechanics approach to poroelastic behavior of a jointed rock

The formulation of macroscopic poroelastic behavior of a jointed rock is investigated within the framework of a micro–macro approach. The joints are modeled as interfaces, and their behavior is modeled by means of generalized poroelastic state equations. Starting from Hill's lemma extended for a jointed medium and extending the concept of strain concentration to relate the joint displacement jump to macroscopic strain, the overall poroelastic constitutive equations for the jointed rock are formulated. The analysis emphasizes the main differences and similarities of the resulting behavior with respect to that characterizing ordinary porous media. It is shown that, unlike ordinary porous media, conditions on the poroelastic parameters of joints are required for the macroscopic drained stiffness to entirely define the poroelastic behavior. This is achieved, for instance, if the joint network is characterized by a unique Biot coefficient. Extension of the analysis to non‐linear poroelasticity is also outlined. Finally, the theoretical formulation is applied to two particular cases of jointed rock for which explicit expressions of the overall poroelastic parameters are derived. Copyright © 2011 John Wiley & Sons, Ltd.     

Crustal structure of the Ordovician Macquarie Arc,Eastern Lachlan Orogen,based on seismic‐reflection profiling

In the Eastern Lachlan Orogen, the mineralised Molong and Junee‐Narromine Volcanic Belts are two structural belts that once formed part of the Ordovician Macquarie Arc, but are now separated by younger Silurian‐Devonian strata as well as by Ordovician quartz‐rich turbidites. Interpretation of deep seismic reflection and refraction data across and along these belts provides answers to some of the key questions in understanding the evolution of the Eastern Lachlan Orogen—the relationship between coeval Ordovician volcanics and quartz‐rich turbidites, and the relationship between separate belts of Ordovician volcanics and the intervening strata. In particular, the data provide evidence for major thrust juxtaposition of the arc rocks and Ordovician quartz‐rich turbidites, with Wagga Belt rocks thrust eastward over the arc rocks of the Junee‐Narromine Volcanic Belt, and the Adaminaby Group thrust north over arc rocks in the southern part of the Molong Volcanic Belt. The seismic data also provide evidence for regional contraction, especially for crustal‐scale deformation in the western part of the Junee‐Narromine Volcanic Belt. The data further suggest that this belt and the Ordovician quartz‐rich turbidites to the east (Kirribilli Formation) were together thrust over ?Cambrian‐Ordovician rocks of the Jindalee Group and associated rocks along west‐dipping inferred faults that belong to a set that characterises the middle crust of the Eastern Lachlan Orogen. The Macquarie Arc was subsequently rifted apart in the Silurian‐Devonian, with Ordovician volcanics preserved under the younger troughs and shelves (e.g. Hill End Trough). The Molong Volcanic Belt, in particular, was reworked by major down‐to‐the‐east normal faults that were thrust‐reactivated with younger‐on‐older geometries in the late Early ‐ Middle Devonian and again in the Carboniferous.     

Plio-Pleistocene sedimentation in coastal grabens,north-east Rhodes,Greece

The stratigraphy of marine Plio-Pleistocene sediments from northeast Rhodes (Dodecanese islands, Greece) is revised in the light of facies mapping and the recognition of three major transgression–regression cycles. Before late Pliocene submergence, metamorphosed Mesozoic limestones formed a high-relief karstic landscape. During subsequent transgressions, subsiding basins with spectacular cliffed and bioeroded margins were infilled by a mosaic of carbonate-dominated sediments, sourced by high rates of carbonate productivity on narrow shelves rimming the basins and their drowning islands. Periods of relative sea-level fall superimposed a complex series of ‘fossil’ coastal geomorphological features such as cliffs, abrasion platforms, surf caves, notches, boulder beaches and palaeokarsts. These created the rugged present day topography of the island's northeast coast. Three main lithostratigraphic units, the Kritika, Rhodes and Lindos Acropolis Formations, are defined. The Rhodes and Lindos Acropolis Formations are subdivided into mappable facies groups rather than members, as the lithofacies are strongly diachronous. The Kritika and Rhodes Formations were each subaerially exposed and partly eroded before re-transgression. Although there is a general pattern of lithological succession, details vary across the study area and some facies groups are restricted in development, indicating differences in tectonic behaviour and palaeo-geomorphology between neighbouring basins. A preliminary process-response model is presented for the sedimentation history of the Rhodes and Lindos Acropolis Formations, using sedimentological, palaeontological, palaeoecological and ichnological data.     

Effect of sampling and linkage on fault length and length–displacement relationship

The power-law exponent (n) in the equation: D=cL ⁿ , with D = maximum displacement and L = fault length, would be affected by deviations of fault trace length. (1) Assuming n=1, numerical simulations on the effect of sampling and linkage on fault length and length–displacement relationship are done in this paper. The results show that: (a) uniform relative deviations, which means all faults within a dataset have the same relative deviation, do not affect the value of n; (b) deviations of the fault length due to unresolved fault tip decrease the values of n and the deviations of n increase with the increasing length deviations; (c) fault linkage and observed dimensions either increase or decrease the value of n depending on the distribution of deviations within a dataset; (d) mixed deviations of the fault lengths are either negative or positive and cause the values of n to either decrease or increase; (e) a dataset combined from two or more datasets with different values of c and orders of magnitude also cause the values of n to deviate. (2) Data including 19 datasets and spanning more than eight orders of fault length magnitudes (10⁻²–10⁵ m) collected from the published literature indicate that the values of n range from 0.55 to 1.5, the average value being 1.0813, and the peak value of n _d (double regression) is 1.0–1.1. Based on above results from the simulations and published data, we propose that the relationship between the maximum displacement and fault length in a single tectonic environment with uniform mechanical properties is linear, and the value of n deviated from 1 is mainly caused by the sampling and linkage effects.     

A surface complexation model for cadmium and lead adsorption onto diatom surface

This work is devoted to the physico-chemical study of cadmium and lead interaction with diatom–water interfaces for two marine planktonic (Thalassiosira weissflogii = TW, Skeletonema costatum = SC) and two freshwater periphytic species (Achnanthidium minutissimum = AMIN, Navicula minima = NMIN) by combining adsorption measurements with surface complexation modeling. Reversible adsorption experiments were performed at 20 °C after 3 h of exposure as a function of pH, metal concentration in solution, and ionic strength. While the shape of pH-dependent adsorption edge is similar among all four diatom species, the constant-pH adsorption isotherm and maximal binding capacities differ. These observations allowed us to construct a surface complexation model for cadmium and lead binding by diatom surfaces that postulates the constant capacitance of the electric double layer and considers Cd and Pb complexation with mainly carboxylic and, partially, silanol groups. Parameters of this model are in agreement with previous acid–base titration results and allow quantitative reproduction of all adsorption experiments.     

A non-linear stress-stiffness model for geomaterials at small to intermediate strains

A double exponential fitting model (DEFM) capable of expressing the non-linear stress-stiffness relationship of geomaterials has been proposed by Shibuya et al. (1997). The model comprises two material constants; the elastic stiffness at very small strains and the strength, together with other free parameters to determine the complete stress-stiffness relationship. In this paper, the capability of the original function used for DEFM in simulating the tangent stiffness-stress relationship of geomaterials is first discussed. Second, the methods for determining the free model parameters, as well as its conversion to obtain a stress-strain relationship are proposed. The applicability of DEFM to predicting non-linear stress-stiffness relationship is examined in detail in a total of forty-nine fitting cases of compression test data on sedimentary rock, artificial soft rock and soft clay. It is found that the DEFM is effective in expressing the non-linear stress-stiffness relationship of various kinds of geomaterials at small to intermediate strains, say less than 0.5%. The superiority of this model compared to other fitting models currently in use is also demonstrated in some of the fitting cases.     

Lithofacies succession of maar crater deposits in the Eifel area (Germany)

ABSTRACT Maar craters often contain exceptionally preserved fossils and maar sediments may reflect detailed environmental changes. Volcanosedimentary processes in a Middle Eocene maar crater lake are illustrated by the deposits of Eckfeld Maar in the Tertiary Hocheifel Volcanic Field (Rhenish Massif, Germany). The maar origin of the basin is evident from a circular negative gravity anomaly which indicates a low-density funnel-shaped basin filling. From the facies analysis of an Eocene (Eckfeld) and a Pleistocene (Döttingen) maar we develop a lithozone classification for the interpretation of maar sediments: syn-/post-eruptive breccias are followed by a fining-upwards sequence of lacustrine mud with coarse layers and final swamp deposits. From the facies analysis and regional geological data we reconstruct the pre- to post-eruptive history of a maar crater prior to post-Eocene uplift. These observations can be used for the interpretation of Tertiary and Quaternary maar craters that are ideal fossil and sediment traps.     

Residence, Resorption and Recycling of Zircons in Devils Kitchen Rhyolite, Coso Volcanic Field, California

Zircons from the Devils Kitchen rhyolite in the PleistoceneCoso Volcanic field, California have been analyzed by in situPb/U ion microprobe (SHRIMP-RG) and by detailed cathodoluminescenceimaging. The zircons yield common-Pb-corrected and disequilibrium-corrected²⁰⁶Pb/²³⁸U ages that predate a previously reported K–Arsanidine age by up to 200 kyr, and the range of ages exhibitedby the zircons is also approximately 200 kyr. Cathodoluminescenceimaging indicates that zircons formed in contrasting environments.Most zircons are euhedral, and a majority of the zircons areweakly zoned, but many also have anhedral, embayed cores, witheuhedral overgrowths and multiple internal surfaces that aretruncated by later crystal zones. Concentrations of U and Thvary by two orders of magnitude within the zircon population,and by 10–20 times between zones within some zircon crystals,indicating that zircons were transferred between contrastingchemical environments. A zircon saturation temperature of 750°Coverlaps within error a previously reported phenocryst equilibrationtemperature of 740 ± 25°C. Textures in zircons indicativeof repeated dissolution and subsequent regrowth are probablycaused by punctuated heating by mafic magma input into rhyolite.The overall span of ages and large variation in U and Th concentrations,combined with calculated zircon saturation temperatures andresorption times, are most compatible with crystallization inmagma bodies that were emplaced piecemeal in the crust at Cosoover 200 kyr prior to eruption, and that were periodically rejuvenatedor melted by subsequent basaltic injections. KEY WORDS: zircon geochronology; residence time; rhyolite; ion microprobe; California