Measurements of the light flash produced by high velocity particle impact

The impact light flash produced by electrostatically accelerated iron particles with diameters meters ranging from 5 to 0.05 μm and velocities lying between 1 km/sec and 30 km/sec has been investigated by means of photomultipliers. As target materials mainly gold and tungsten were used. The pulse of the multiplier was registered directly and after electronic integration. The pulse height of the multiplier signal, the amplitude of the integrated signal as well as its rise time were found to be unique functions of the mass and velocity of the impacting particle. For the pulse height of the differential signal the relation I = c₁ × m^1.25 × v⁵ was obtained, and for the integrated signal the relation I = c₂ × m^1.25 × v^3.8, with only c₁ and C₂ depending on the target material. The rise time of the integrated signal follows the relation T = 2.2 × 10² × v^?0.4 using gold as target, and in the case of tungsten material follows the relation T = 9.8 × 10² × v^?1.2, where v is expressed in km/sec and T in μsec. Using the spectral distribution of the light intensity, measured by means of calibrated photomultipliers, the total amount of light energy emitted in the visible range could be calculated. As a result we obtained that for v = 4 km/sec and m = 10^?11 g about 3 × 10^?4 of the kinetic energy of the particle was converted into light energy. The variation of the impact flash intensity with the target material and the measured spectral distribution allowed the temperature of the crater after the impact to be estimated as between 2000 and 3000 K.     

Lunar microwave brightness temperature observations reevaluated in the light of Apollo program findings

Remote observations of the lunar radiowave emission are reexamined in the light of physical property data accumulated through the Apollo program. It is found that thermal and electrical properties determined for a number of different landing sites yield theoretical results in good agreement with remote observations for millimeter and short centimeter wavelengths. Theoretical models incorporating reflecting layers of rock and physical property data from the Apollo program are compared to the longer wavelength (5–500 cm) observational data to estimate a disk average steady state heat flow and a mean depth of the lunar regolith. It is found that a high heat flow, comparable to the heat flows measured at the Apollo 15 and 17 sites, is required to fit the available 5–20 cm wavelength remote data, and that a lunar surface layer relatively free of large boulders within the upper 10–30 m best fits the observations of a decreasing brightness temperature with wavelength for wavelengths greater than ～ 50 cm.     

The T Tauri star RU Lupi and its circumstellar surrounding

From simultaneous spectroscopic and photometric observations of the T Tauri star RU Lup, which was followed for nine consecutive nights, it was found that most if not all of the light variations observed on this star were caused by variable circumstellar extinction. The character and the time-scale of the variations imply that the variations are due to dust concentrations of stellar dimension crossing the line of sight to the star. The implications of this interpretation and its possible bearing on problems of protoplanetary systems are discussed.     

The thermal radiation of Saturn and its rings

Infrared observations of Saturn from 5 to 40 μm are described. There is intense limb brightening at 12.35 μm over the southern polar cap. The C ring is anomalously bright at 10 and 20 μm and has bluer (hotter) colours than the A and B rings. The ring spectra have been extrapolated beyond 40 μm and subtracted from low-resolution far-infrared measurements to show that the far-infrared spectrum of the disk of Saturn is qualitatively similar to that of Jupiter and that Saturn radiates 2.5 ± 0.6 times the energy it absorbs from the Sun.     

On the possibility of creating a radio-astronomical inertial coordinate system based on the measurement of arcs between QSOs with the aid of VLBI

The aim of this paper has been to discuss a possibility of the formation of an inertial system of coordinates, precise within 0″.001, with the aid of the measures of mutual angular distances of quasars by the VLBI technique used in radio-astronomy. Such a system depends on neither the rotation, nor revolution of the Earth around the Sun — a fact which permits a separation of the astronomical and geophysical aspects of the problem. The proposed system should permit us to resolve some general astrometric problems — such as of the precession and nutation of the Earth as well as of the motion of the terrestrial axis of rotation within the Earth, or fluctuations in the angular veoocity of terrestrial rotation.     

The atmosphere of Io from Pioneer 10 radio occultation measurements

The occultation of the Pioneer 10 spacecraft by Io (JI) provided an opportunity to obtain two S-band radio occultation measurements of its atmosphere. The dayside entry measurements revealed an ionosphere having a peak density of about 6 × 10⁴ elcm^?3 at an altitude of about 100 km. The topside scale height indicates a plasma temperature of about 406 K if it is composed of Na⁺ and 495 K if N₂⁺ is principal ion. A thinner and less dense ionosphere was observed on the exit (night side), having a peak density of 9 × 10³ elcm^?3 at an altitude of 50 km. The topside plasma temperature is 160 K for N₂^? and 131 K for Na⁺. If the ionosphere is produced by photoionization in a manner analogous to the ionospheres of the terrestrial planets, the density of neutral particles at the surface of Io is less than 10¹¹?10¹² cm³, corresponding to a surface pressure of less than 10^?8 to 10^?9 bars. Two measurements of its radius were also obtained yielding a value of 1830 km for the entry and 192 km for the exit. The discrepancy between these values may indicate an ephemeris uncertainty of about 45 km. The two measurements yield an average radius of 1875 km, which is not in agreement with the results of the Beta Scorpii stellar occultation.     

On the nature of some active regions in the microwave range

The radio emission of a selected number of solar active regions has been investigated with high angular resolution at two frequencies: 10 and 17 GHz. By comparing the results of the two observations the following conclusions can be drawn:

1. The brightness temperature distribution of an active region is often composed of very bright cores of small dimension (angular extent θ?20″) imbedded in extended halos of lower brightness.
2. The radio emission of such structures as well as the degree of polarization can be explained with a thermal process. The halos can originate by pure thermal bremsstrahlung while in the case of the very bright cores found at 10 GHz (brightness temperature T _b?1–9 × 10⁶K) the emission at the harmonics of the gyrofrequency is needed.

     

Observations of the structure and evolution of solar flares with a soft X-ray telescope

132 soft X-ray flare events have been observed with The Aerospace Corporation/Marshall Space Flight Center S-056 X-ray telescope that was part of the ATM complement of instruments aboard Skylab. Analyses of these data are reported in this paper. The observations are summarized and a detailed discussion of the X-ray flare structures is presented. The data indicated that soft X-rays emitted by a flare come primarily from an intense well-defined core surrounded by a region of fainter, more diffuse emission. Loop structures are found to constitute a fundamental characteristic of flare cores and arcades of loops are found to play a more important role in the flare phenomena than previously thought. Size distributions of these core features are presented and a classification scheme describing the brightest flare X-ray features is proposed. The data show no correlations between the size of core features and: (1) the peak X-ray intensity, as indicated by detectors on the SOLRAD satellite; (2) the rise time of the X-ray flare event, or (3) the presence of a nonthermal X-ray component. An analysis of flare evolution indicates evidence for preliminary heating and energy release prior to the main phase of the flare. Core features are found to be remarkably stable and retain their shape throughout a flare. Most changes in the overall configuration seem to be the result of the appearance, disappearance or change in brightness of individual features, rather than the restructuring or re-orientation of these features. Brief comparisons with several theories are presented.     

Solar-interplanetary modeling: 3-D solar wind solutions in prescribed non-radial magnetic field geometries

A model is presented which describes the 3-dimensional non-radial solar wind expansion between the Sun and the Earth in a specified magnetic field configuration subject to synoptically observed plasma properties at the coronal base. In this paper, the field is taken to be potential in the inner corona based upon the Mt. Wilson magnetograph observations and radial beyond a certain chosen surface. For plasma boundary conditions at the Sun, we use deconvoluted density profiles obtained from synopticK-coronameter brightness observations. The temperature is taken to be 2 × 10⁶ K at the base of closed field lines and 1.6 x 10⁶K at the base of open field lines. For a sample calculation, we employ data taken during the period of the 12 November 1966 eclipse. Although qualitative agreement with observations at 1 AU is obtained, important discrepancies emerge which are not apparent from spherically symmetric models or those models which do not incorporate actual observations in the lower corona. These discrepancies appear to be due to two primary difficulties - the rapid geometric divergence of the open field lines in the inner corona as well as the breakdown in the validity of the Spitzer heat conduction formula even closer to the Sun than predicted by radial flow models. These two effects combine to produce conductively dominated solutions and lower velocities, densities, and field strengths at the Earth than those observed. The traditional difficulty in solar wind theory in that unrealistically small densities must be assumed at the coronal base in order to obtain observed densities at 1 AU is more than compensated for here by the rapid divergence of field lines in the inner corona. For these base conditions, the value ofβ(ratio of gas pressure to magnetic pressure) is shown to be significantly greater than one over most of the lower corona - suggesting that, for the coronal boundary conditions used here, the use of a potential or force-free magnetic field configuration may not be justified. The calculations of this paper point to the directions where future research on solar-interplanetary modelling should receive priority:

1. better models for the coronal magnetic field structure
2. improved understanding of the thermal conductivity relevant for the solar wind plasma.