Photoadaptation of carboxylating enzymes and photosynthesis during a spring bloom

Properties of the light saturation curve of photosynthesis and ribulose-1,5-bisphosphate carboxylase (RuBPC) activity are shown to change qualitatively in a natural population of marine phytoplankton during a spring bloom. Evidence is presented to show that these changes constitute photoadapative responses to increasing irradiance. As irradiance increased during the bloom, both the level of light-saturated photosynthesis (P_m) and the initial slope of the light saturation curve (α = photosynthetic efficiency) increased whether those parameters were normalized to chlorophyll a concentration (P_m^b, α^b) or to cell numbers (P_m^c, α^c). The magnitudes of these changes were such that I_k (= P_m/α, the photoadaptation parameter) did not change, but I_m, the light intensity at which photosynthesis becomes saturated, increased. RuBPC activity, both chlorophyll a (RuBPC^b) and cell number normalized (RuBPC^c), also increased during the bloom. We suggest that these adaptations were achieved by simultaneously increasing the number of photosynthetic units, proportionately decreasing the photosynthetic unit size, and increasing both the concentrations of the enzymes of the dark reactions and possibly also of photosynthetic electron transport components.We also observed diminished levels of photoinhibition in the high light adapted cells late in the bloom and have suggested that this was a consequence of the same suite of physiological changes.In situ carbon fixation per cell increased during the bloom whereas no change occurred in this parameter when normalized to chlorophyll a concentration. Although these photoadaptive responses thus permitted carbon to be fixed in situ more rapidly per cell, at a constant efficiency with respect to investment of energy in the photosynthetic apparatus, they did not result in a change in growth rate. Based on consideratios of the role of time scale in physiological adaptation, however, it is suggested that the observed alterations in photosynthesis with increasing irradiance might permit a cell to more rapidly fill an energy quota for division, possibly an advantage in a mixing environment in which energy is patchily distributed, both spatially and temporalyy.Phosphoenolpyruvate carboxylase activity when normalized to chlorophyll a (PEPC^b) did not change during the bloom while chlorophyll a normalized dark carbon fixation decreased sharply and was quantitatively small compared to PEPC^b. On this basis and considering that RuBPC^b increased during the bloom, it is suggested that, although PEPC may be involved in dark carbon fixation, its most important quantitative role is probably an indirect one in light dependent photosynthesis.We have also considered the relevance of laboratory results on photoadaptation to interpretations of field studies and have suggested that batch culture studies must be treated with caution but that turbidistat and semi-continuous methods provide reasonable simulations of natural conditions.     

Sound velocity,density, and related properties along a transect across the Bay of Bengal

Physical properties, sound velocity and density of 95 core samples from ten locations along a transect (parallel to 15°N latitude) across the Bay of Bengal were measured. Results indicate that sound velocities range from 1,482 to 1,679 m/s (av: 1,583 m/s) and densities from 1,338 to 1,757 kg/m³ (av: 1,527 kg/m³). It has been observed that dark colored clays and sandy clays show higher values of sound velocity and density than the average values. A comparative study of the same with that of the sediment cores collected from the Norwegian basin, Mediterranean Sea, and Hatteras, Nares Abyssal plains, western North Atlantic Ocean was done.     

Virgin rock temperatures from well logs — accuracy analysis for some advanced inversion models

Temperature data from 18 measurement series obtained during logging of the Oseberg field in the northern North Sea are presented. Because the measurement series are taken at approximately the same depth, they should give identical temperatures after depth correction, and are suitable for assessing the performance of different models used to determine virgin rock temperatures from well log information.We have used this data set to test the properties of the different models given by Shen and Beck (1986). Although these models were built to simulate closely the thermal recovery of a well and are unbiased, the uncertainties in the temperature estimates when applied to real data are found to be no less than those from simpler (biased) models. This fact confirms the conclusion of Hermanrud (1989a) who showed that physical factors other than those presently accounted for significantly influence the thermal recovery of a borehole.     

On the sulphur chemistry of a super-anoxic fjord, Framvaren, South Norway

The concentrations of total carbonate (C_t), sulphate, sulphide, thiols and oxygen, the ratio between the stable sulphur isotopes ³⁴S and ³²S in sulphate and sulphide, and the density (used to calculate salinity) were determined on samples from the water column of Framvaren, a superanoxic fjord in southern Norway. From a depth of 18m (the oxic-anoxic boundary) the initial sulphate concentration, ([SO₄]_init), as calculated from salinity, is significantly higher than the sum of the measured sulphur species. This is attributed to a loss of sulphur from the water column. The amount of total carbonate produced, corrected for the initial concentration (C_t - 2.4 Sal/35) is found to be proportional to the amount of sulphate consumed, ([SO₄]_init - [SO₄]), according to the following relation C_t- 2.4 Sal/35 = 1.84 ([SO₄]_init - [SO₄]). Isotopic fractionation caused by bacterial sulphate reduction in the anoxic part of the water column produces sulphide with a δ³⁴S 40‰ lower than the δ³⁴S for sulphate at corresponding depths. The isotopic fractionation also results in δ³⁴S value for the remaining sulphate at depths below 80 m being considerably higher than the mean value for ocean water, which is close to + 20‰. The δ³⁴S values for sulphate at depths between 10 and 50 m were lower than + 20‰ which indicates oxidation of sulphide, which follows upon diffusion of sulphide from deeper parts of the water column and inflow of oxygenated seawater over the sill into the anoxic water of the fjord. A conclusive scenario of the Framvaren sulphur chemistry is presented.     

Mechanisms controlling the temporal variation of the sea ice edge in the Southern Ocean

This paper examines the mechanism controlling the short time-scale variation of sea ice cover over the Southern Ocean. Sea ice concentration and ice velocity datasets derived from images of the Defense Meteorological Satellite Program (DMSP) Special Sensor Microwave Imager (SSM/I) are employed to reveal this mechanism. The contribution of both dynamic and thermodynamic processes to the change in ice edge location is examined by comparing the meridional velocity of ice edge displacement and sea ice drift. In the winter expansion phase, the thermodynamic process of new ice production off the ice edge plays an important role in daily advances of ice cover, whereas daily retreats are mostly due to southward ice drift. On the other hand, both advance and retreat of ice edges in the spring contraction phase are mostly caused by the dynamic process of the ice drift. Based on the above mechanism and the linear relation between the degree of ice production at the ice edge and northward wind speed, the seasonal advance of ice cover can be roughly reproduced using the meridional velocity of ice drift at the ice edge.     

The Levant Slumps and the Phoenician Structures: collapse features along the continental margin of the southeastern Mediterranean Sea

Two distinct series of slumps deform the upper part of the sedimentary sequence along the continental margin of the Levant. One series is found along the base of the continental slope, where it overlies the disrupted eastern edge of the Messinian evaporites. The second series of slumps transects the continental margin from the shelf break to the Levant Basin. It seemed that the two series were triggered by two unrelated, though contemporaneous, processes. The shore-parallel slumps were initiated by basinwards flow of the Messinian salt, that carried along the overlying Plio-Quaternary sediments. Seawater that percolated along the detachment faults dissolved the underlying salt to form distinctly disrupted structures. The slope-normal slumps are located on top of large canyons that cut into the pre-Messinian sedimentary rocks. A layer of salt is found in the canyons, and the Plio-Quaternary sediments were deposited on that layer. The slumps are bounded by large, NW-trending faults where post-Messinian faulted offset was measured. We presume that the flow of the salt in the canyons also drives the slope-normal slumps. Thus thin-skinned halokynetic processes generated the composite post-Tortonian structural patterns of the Levant margin. The Phoenician Structures are a prime example of the collapse of a distal continental margin due to the dissolution of a massive salt layer.     

On the relevance of iron adsorption to container materials in small-volume experiments on iron marine chemistry: Fe-aided assessment of capacity, affinity and kinetics

Iron chemistry in seawater has been extensively studied in the laboratory, mostly in small-volume sample bottles. However, little has been reported about iron wall sorption in these bottles. In this paper, radio-iron ⁵⁵Fe was used to assess iron wall adsorption, both in terms of capacity, affinity and kinetics. Various bottle materials were tested. Iron sorption increased from polyethylene/polycarbonate to polymethylmetacrylate (PMMA)/high-density polyethylene/polytetrafluoroethylene to glass/quartz, reaching equilibrium in a 25–70 h period. PMMA was studied in more detail: ferric iron (Fe(III)) adsorbed on the walls of the bottles, whereas ferrous iron (Fe(II)) did not. Considering that in seawater the inorganic iron pool mostly consists of ferric iron, the wall will be a factor that needs to be considered in bottle experiments.The present data indicate that for PMMA with specific surface (S)-to-volume (V) ratio S/V, both iron capacity (42 ± 16 × 10^− 9 mol/m² or 1.7 × 10^− 9 mol/L recalculated for the S/V-specific PMMA bottles used) and affinity (log K_Fe'W = 11.0 ± 0.3 m²/mol or 12.4 ± 0.3 L/mol, recalculated for the S/V-specific PMMA bottles used) are of similar magnitude as the iron capacity and -affinity of the natural ligands in the presently used seawater and thus cannot be ignored.Calculation of rate constants for association and dissociation of both Fe'L (iron bound to natural occurring organic ligands) and Fe'W (iron adsorbed on the wall of vessels) suggests that the two iron complexes are also of rather similar kinetics, with rate constants for dissociation in the order of 10 ⁻⁴–10^− 5 L/s and rate constants for association in the order of 10⁸ L/(mol s). This makes that iron wall sorption should be seriously considered in small-volume experiments, both in assessments of shorter-term dynamics and in end-point observations in equilibrium conditions. Therefore, the present data strongly advocate making use of iron mass balances throughout in experiments in smaller volume set-ups on marine iron (bio) chemistry.     

Chalk shore platform erosion in the vicinity of sea defence structures and the impact of construction methods

Erosion of the intertidal chalk platform in the vicinity of groynes and seawalls is evident to the naked eye along many stretches of the engineered coastline of southeast England, leading to undermining and eventually failure of these structures. However, quantification of the magnitude and spatial extent of the erosion has been difficult to date because of a lack of data about the past elevation of the platform. The application of softcopy photogrammetry makes it possible to recreate past platform elevations from historic air photographs and to compare these with elevations from modern air photographs. Coastal sea defence structures have been installed along the chalk coast east of Brighton at various dates over the past 70 years. During this period, the construction methods have changed from predominantly manual labour to a reliance on heavy machines. The analysis of erosion patterns around structures built since the 1970s using heavy machinery show that surface lowering is 4 to 25 times greater in the vicinity of these structures than across the platform as a whole. In contrast, there is no similar pattern of increased erosion around structures built using predominantly manual labour in the 1930s. A four fold increase in average surface lowering is found also along a vehicle trackway that crosses the mid platform. Depressions developed by enhanced lowering in the front of seawalls generate their own dynamic of increased erosion by trapping pebbles and cobbles that enhance the abrasion of the chalk through bedload transport under standing waves in front of the walls.     

On the use of poorly soluble hygroscopic substances for modification of warm clouds and fogs

From analysis of the relationships between the equilibrium state of condensation nuclei and the relative humidity, a conclusion is made concerning the preferred use of poorly soluble substances for the generation of artificial condensation nuclei (ACN) designed for modification of warm clouds and fogs with the purpose of their dissipation and precipitation formation. The advantage of poorly soluble substances over commonly used soluble salts is that the finely dispersed part of the spectrum of the poorly soluble ACN does not deliquesce and so is not involved in the formation of cloud droplets. For experimental testing of the conclusions, preference was given to cement, whose main soluble substance is calcium oxide with a solubility of about 1 g/l. The spectrum of dispersed cement particles was measured and compared with the spectra of pyrotechnic flares widely used for modification at present. The process of formation of the cloud droplet spectra was simulated in the aerosol chamber of the Institute of Experimental Meteorology by decreasing the preliminarily generated excess pressure. It was found in these experiments that, compared to the spectra of particles formed on background condensation nuclei, the introduction of dispersed cement leads to the broadening of spectra and to a decrease in the concentration of droplets. Even at the early stage of condensation, droplets with radii of ∼20 μm appear. In this case, no “overseeding” phenomenon is observed, which, for soluble substances, manifests itself in an increase in the concentration of cloud droplets with a large ACN concentration. These effects indicate that, according to the existing concepts about the mechanism of warm-cloud modification with hygroscopic substances, the introduction of poorly soluble ACN (in particular, dispersed cement) below the base of cumulus clouds should stimulate coagulation processes and accelerate rain-formation processes. Considerations are given that the introduction of poorly soluble ACN into the already existing cumulus or stratocumulus clouds or fogs should also result in the acceleration of precipitation-formation processes or cloud dispersal. Comparison of cement powder with the well-known means of warm-cloud and fog modification is carried out. Original Russian Text ? N.P. Romanov, A.S. Drofa, N.S. Kim, A.V. Savchenko, G.F. Yaskevich, 2006, published in Izvestiya AN. Fizika Atmosfery i Okeana, 2006, Vol. 42, No. 1, pp. 80–91.     

Estimation of the long-term variability of hydrophysical characteristics of the Black Sea based on the assimilation of the climatic hydrological fields L and altimetry data

To study the long-term variability of the thermohaline and dynamic characteristics of the Black Sea, we use three versions of climatic fields, namely, the fields reconstructed in the model according to the old (1903–1982) and new (1903–2003) hydrological climatic data arrays of temperature and salinity and according to the data of satellite altimetry. The analysis of the altimetry-based climatic fields confirms the distinctions (established earlier according to the old and new data arrays) in the seasonal variability of the integral characteristics of temperature and salinity and in the structures of hydrophysical fields in the sea. It is shown that, in the winter-spring season, the thermohaline fields reconstructed according to the new and altimetry data arrays are characterized by a small elevation of the halocline (pycnocline) and the upper boundary of the cold intermediate layer. In all seasons, the altimetry-based surface geostrophic currents contain numerous mesoscale eddies with different signs of rotation. Moreover, in all seasons, the Rim Current reconstructed according to the altimetry data is characterized by a narrower jet almost along the entire its length. This jet is especially intense near the coasts of West Anatolia. __________ Translated from Morskoi Gidrofizicheskii Zhurnal, No. 4, pp. 3–17, July–August, 2006.