Simulation of the Influence of Rate- and State-dependent Friction on the Macroscopic Behavior of Complex Fault Zones with the Lattice Solid Model

-- In order to understand the earthquake nucleation process, we need to understand the effective frictional behavior of faults with complex geometry and fault gouge zones. One important aspect of this is the interaction between the friction law governing the behavior of the fault on the microscopic level and the resulting macroscopic behavior of the fault zone. Numerical simulations offer a possibility to investigate the behavior of faults on many different scales and thus provide a means to gain insight into fault zone dynamics on scales which are not accessible to laboratory experiments. Numerical experiments have been performed to investigate the influence of the geometric configuration of faults with a rate- and state-dependent friction at the particle contacts on the effective frictional behavior of these faults. The numerical experiments are designed to be similar to laboratory experiments by Dieterich and Kilgore (1994) in which a slide-hold-slide cycle was performed between two blocks of material and the resulting peak friction was plotted vs. holding time. Simulations with a flat fault without a fault gouge have been performed to verify the implementation. These have shown close agreement with comparable laboratory experiments. The simulations performed with a fault containing fault gouge have demonstrated a strong dependence of the critical slip distance D_c on the roughness of the fault surfaces and are in qualitative agreement with laboratory experiments.     

Modeling African equatorial ionosphere using ordinary Kriging interpolation technique for GNSS applications

The ability to model the ionosphere accurately for single frequency users in satellite applications has gained some appreciable usage, most especially during quiet conditions in a mild (middle latitudes) ionosphere. However, solving the problem of ionosphere for single frequency user of Global Navigation Satellite Systems (GNSS) in equatorial ionization anomaly (EIA) region is of a great concern for space scientists and engineers. Several methodologies have been used to develop models that describe global or regional maps for ionosphere errors in order to mitigate the effect of the errors on GNSS systems. Global or regional ionosphere Maps have been known to be an efficient tool to monitor the delay introduced by the ionosphere in the satellite signals. This research uses the conventional Planar fit and ordinary Kriging methodologies to assess a regional map for ionosphere correction in equatorial African sector. The result obtained is an indication that modified Kriging methodology describes the EIA ionosphere corrections better compared with ordinary Kriging and Planar fit methodologies.     

Estimating of gas transfer velocity using triple isotopes of dissolved oxygen

The atmosphere-ocean exchange of climatically important gases is determined by the transfer velocity (k) and concentration gradient across the interface. Based on observations in the northwestern subarctic Pacific and Sagami Bay, we report here the results of the first ever application of the natural abundance of triple isotopes of dissolved oxygen (¹⁶O, ¹⁷O and ¹⁸O) for direct estimation of k and propose a new relationship with wind speed. The k values estimated from nighttime variations in oxygen isotopes are found to be higher than the direct estimations at low wind speed (<5 m s⁻¹) and lower at high wind speeds (>13 m s⁻¹) and showed significant spatial variability. The method presented here can be used to derive seasonal and spatial variations in k and the influence of surface conditions on the value, leading to improved estimates of biogenic/anthropogenic gas exchange at the air-sea interface.     

Multi-scale solution for building extraction from LiDAR and image data

This paper presents a multi-scale solution based on mathematical morphology for extracting the building features from remotely sensed elevation and spectral data. Elevation data are used as the primary data to delineate the structural information and are firstly represented on a morphological scale-space. The behaviors of elevation clusters across the scale-space are the cues for feature extraction. As a result, a complex structure can be extracted as a multi-part object in which each part is represented on a scale depending on its size. The building footprint is represented by the boundary of the largest part. Other object attributes include the area, height or number of stories. The spectral data is used as an additional source to remove vegetation and possibly classify the building roof material. Finally, the results can be stored in a multi-scale database introduced in this paper. The proposed solution is demonstrated using the data derived from a Light Detection And Ranging (LiDAR) surveying flight over Tokyo, Japan. The results show a reasonable match with reference data and prove the capability of the proposed approach in accommodation of diverse building shapes. Higher density LiDAR is expected to produce better accuracy in extraction, and more spectral sources are necessary for further classification of building roof material. It is also recommended that parallel processing should be implemented to reduce the computation time.     

Survival of a proto-atmosphere through the stage of giant impacts: the mechanical aspects

When a giant impact occurs, atmosphere loss may occur due to global ground motion excited by a strong shock wave traveling in the planetary interior. Here, the relations between the ground motion and the amount of the lost atmosphere are systematically investigated through calculations of a spherically one-dimensional atmospheric motion for various initial atmospheric conditions. The fraction of the lost atmosphere to the total mass of the atmosphere is found to be controlled only by the ground velocity and, insensitive to the initial atmospheric conditions. Unlike the previous studies (Ahrens, 1990, Origin of the Earth, H.E. Newson, J.H. Jones (Eds.), pp. 211-227; Ahrens, 1993, Annu. Rev. Earth Planet. Sci. 21, 525-555; Chen and Ahrens, 1997, Phys. Earth Planet. Inter. 100, 21-26); the estimated loss fraction for the giant impact is only 20%. Significant escape occurs only when the ground velocity is close to the escape velocity. Thus, most of the atmosphere should survive the giant impact. The cause of the difference from previous estimates is discussed from energetic and dynamic points of view. Moreover, if our estimates are applied to the atmosphere of the impactor planet, a significant fraction of it is carried to the target planet. Survival of the proto-atmosphere has very important effects on the origin and evolution of the terrestrial planets' volatile budget.     

Periodic activity of Comet Bradfield 1987s

A periodic brightness variation of about 6 days was found by applying maximum entropy method to the visual brightness of Comet Bradfield 1987s. This activity was clearly apparent in January of 1988. No other outstanding period was detected. This suggests that the period of the rotation or precession of the nucleus is about 6 days.     

Effect of isolation on fragility curves of highway bridges based on simplified approach

The trend of isolating highway bridges is on the rise after the recent large earthquakes in Japan, the United States, and other countries. Recent investigation shows that isolated systems perform well against seismic forces as the substructures of such systems experience less lateral forces due to energy dissipation of the isolation device. Hence, it is anticipated that there might be an effect on fragility curves of highway bridges due to isolation. In this study, 30 isolated bridge models were considered (and they were designed according to the seismic design code of highway bridges in Japan) to have a wider range of the variation of structural parameters, e.g. pier heights, weights, and over-strength ratio of structures. Then, fragility curves were developed by following a simplified procedure using 250 strong motion records, which were selected from 5 earthquake events that occurred in Japan, the USA, and Taiwan. It is observed that the level of damage probability for the isolated system is less than that of the non-isolated one for a lower level of pier height. However, having the same over-strength ratio of the structures, the level of damage probability for the isolated system is found to be higher for a higher level of pier height compared to the one of the non-isolated system. The proposed simple approach may conveniently be used in constructing fragility curves for a class of isolated bridge structures in Japan that have similar characteristics.     

砂土应力-应变关系的加载速率效应分析

分析研究了两种砂土在排水平面应变压缩PSC试验和不排水三轴压缩TC试验条件下的加载速率效应,既实现了不同恒定应变率加载条件下的试验,也实现了不同的加载阶段采用不同的恒定应变率（即应变率分阶段变化）的试验。在加载速率为不同恒定应变率时,砂土的应力-应变响应是唯一的,与应变率无关。在加载速率分阶段变化时,依据应力-应变关系对应变率突变的响应程度,对砂土的加载速率效应进行了评价。分析结果表明,砂土应力-应变关系的加载速率效应表现为黏性消散特性,在应变率发生突变的瞬间,由于应变加速度的影响,应力-应变曲线也相应地突变并表现为刚度很大,近似弹性的特性,随着应变的进一步增加,这一近似弹性的行为逐渐消失。     

Characteristics of the ratio of dissolved cadmium to phosphate in subtropical coastal waters of Ishigaki Island,Okinawa, Japan

The ratio of dissolved cadmium (Cd) to phosphate (PO₄) in the subtropical coastal area of Ishigaki Island, Okinawa, Japan, was investigated. Twenty vertical seawater samplings were carried out once a month from May 2008 to January 2010. In order to examine how the Cd/PO₄ ratio in seawater varies with the oceanographic conditions (i.e., the water temperature–salinity characteristics), the water masses at the study sites were classified into two types: group 1 with a water temperature of >25°C and a salinity range of 34.0–34.4, and group 2 with a water temperature of <25°C and a salinity of >34.4. A different phytoplankton assemblage was observed in each water mass defined. Different Cd/PO₄ ratios were obtained for the two water mass types, due to the differences between the types in terms of the environmental conditions such as the water temperature–salinity (T–S) characteristics and phytoplankton assemblages, as well as possible variations in the concentrations of dissolved iron, zinc, manganese, and CO₂ in seawater in each water mass.