GPS-measured land subsidence in Ojiya City, Niigata Prefecture, Japan

Land subsidence caused by compression of clay layers in Ojiya City, Japan was measured by global positioning system (GPS) between 1 April 1996 and 31 December 1998.

Three baselines were selected in and around the city, and height difference on a WGS-84 ellipsoid was measured by GPS on each baseline. The ground at the GPS station in the city subsides and rebounds 7 cm every winter and spring, respectively. Measurement accuracy was 9.5 mm standard deviation. Ground water level was observed at a well near the GPS station. Regression analysis between total strain, calculated as ratio of the height difference displacement to the total thickness of the clay layers, and the layers' effective stress change with ground water level change gave good correlation. The slope of regression line 7.0×10⁻¹¹ m²/N was obtained as an average apparent coefficient of volume compressibility of the layers.     

Soil-structure interaction analysis of the Hualien containment model

This paper presents results from forced vibration tests, microtremor observations and earthquake response analysis of a nuclear reactor containment model constructed on stiff soil in Hualien, Taiwan. The dynamic behavior of the soil-structure system is simulated successfully with two numerical models: a sway-rocking model, whose soil parameters are evaluated on the basis of the continuum formulation method, and a finite element model, using the program SASSI with the flexible volume substructuring approach. The dependences of the soil parameters of both models on the amplitudes of the different dynamic excitations are investigated in detail. An original numerical simulation of microtremor is performed. Comparison with results of a previous study involving a rigid tower on a soft soil site in Chiba, Japan is offered.     

Thermal and chemical evolution of the terrestrial magma ocean

The Earth is likely to have experienced a magma ocean stage during accretion. Thermal and chemical evolution of magma ocean is investigated based on a one-dimensional two-phase-flow heat and mass transfer model. Differentiation at lower mantle pressure depends on the type of magma ocean and surrounding atmosphere. If the magma ocean is formed by the blanketing effect of a solar-type proto-atmosphere, extensive differentiation proceeds at lower mantle pressure. If the magma ocean is formed by the blanketing effect of an impact-induced steam atmosphere, no differentiation at lower mantle pressure is likely. If a very deep magma ocean is formed by a giant impact, whether differentiation proceeds at lower mantle pressure or not depends on grain size, viscosity of melt and/or properties of a transient atmosphere. On the contrary, chemical differentiation likely proceeds at upper mantle pressure irrespective of magma ocean type. A shallow magma ocean can remain for 100 200 My without any heating processes.     

The first absolute gravity measurements in Indonesia

For the purposes of the calibration of the superconducting gravimeter (SG) in Bandung and the establishment of the absolute gravity (AG) points, we carried out AG measurements for the first time in Indonesia in November 2002. The measurements in Bandung were conducted between November 15th and 20th by means of a FG5 (#210), and 14,520 effective drops were obtained. The gravity value newly determined at the AG point in Bandung is 977976701.2 μgal (1 μgal = 10⁻⁸ ms⁻²) and the scale factor for the SG is −52.22 μgal/V. We also established another AG point in Yogyakarta near Merapi volcano and carried out AG measurements in Yogyakarta between November 22nd and 26th. The gravity value determined for this station is 978203093.5 μgal.     

Strain field measurements of rubber by image analysis and design criteria for laminated rubber bearings (LRB)

Although seismic isolation rubber bearings in bridges and buildings have proven to be a very effective passive method for reducing earthquake‐induced forces, a detailed mechanical modeling of the rubber that is used in bearings under large strains has not been established. Therefore, a 3D model of failure behavior and the design criteria for the safety evaluation of seismic isolation bearings have not yet been developed. This paper presents: (1) correlation‐based template‐matching algorithms to measure large strain fields of continua; (2) a failure criterion for rubber; and (3) the design criteria for the safety evaluation of laminated algorithms, data‐validation algorithms were developed and implemented to eliminate possible unrealistic displacement vectors present in the measured displacement field. The algorithms were successfully employed in the strain field measurement of LRB and rubber materials that are subjected to failure. The measured local strains for rubber material at failure were used to develop a failure criterion for rubber. The validity of the proposed criterion was evaluated by applying it to the LRB; the criterion was introduced into a 3D finite element model of LRB, compared with the experimental results of bearings failure, and verified. Finally, design criteria are proposed for LRB for the safety evaluation. Copyright © 2003 John Wiley & Sons, Ltd.     

Fundamental study on the response characteristics of drivers during an earthquake based on driving simulator experiments

After the 1995 Kobe earthquake, the expressway structures in Japan were retrofitted and they will not now be seriously damaged under a certain level of strong earthquake motion. However, the stability of a moving vehicle has not been investigated yet. It has been reported that drivers feel seismically induced vibrations, especially in the transverse direction of vehicles. Owing to this phenomenon, drivers have some difficulty in controlling the vehicles during strong shaking. For further safety promotion of the expressway networks, it is important to understand the drivers' reactions to seismic motion. The present authors have performed a series of seismic response analyses of a moving vehicle to investigate its response characteristics based on numerical simulation. However, the responses of the driver were not considered in the simulation process. In order to investigate the drivers' reactions during an earthquake, a series of virtual tests were conducted using a driving simulator. This driving simulator has six servomotor‐powered electric actuators that control its motions. Several types of tests were carried out for different examinees to investigate drivers' responses while controlling the simulator under seismic motion. The results of this study showed that a larger response time lag to strong shaking and over turning of the steering wheel may shift the vehicle into the next lane. According to this finding, trafficaccidents could possibly occur under strong ground shaking in the case of heavy traffic. Copyright © 2004 John Wiley & Sons, Ltd.     

类石材料--灰泥的冻融过程

Serious failure on the slope of rock ground can be caused by a cyclic action of freezing and thawing in the cold regions. The frost susceptibility and the effect of freezing and thawing onthe rock material, however, have not been well investigated. In order to find out the freezing effect on the rock materials, mortar specimens are frozen as a pseudo-rock material under the constant rate of freezing by means of controlling the temperature of both ends of specimen. The freezing process is given one-dimensionally to the cylindrical samples in the laboratory to simulate the in-situ freezing phenomena in the natural ground. Formation of ice lens, frost heave and water intake during freezing process are observed on the mortar specimen under constant freezing rate, which probably causes cracks or large deformation in the real rock ground. The values of the velocity of elastic wave propagation are compared before and after freezing process to estimate the degree of weathering due to freezing and thawing.     

Non-destructive monitoring of trace element levels in short-tailed albatrosses (Phoebastria albatrus) and black-footed albatrosses (Phoebastria nigripes) from Torishima Island, Japan using eggs and blood

Concentrations of 18 trace elements (V, Cr, Mn, Co, Cu, Zn, Se, Rb, Sr, Mo, Ag, Cd, Sb, Cs, Ba, Hg, Tl and Pb) were determined in abandoned eggs of short-tailed albatrosses and abandoned eggs and blood of black-footed albatrosses from Torishima Island, Japan in 2002. Mercury concentration was highest among the toxic elements in egg content of both the two species. In some egg contents of black-footed albatrosses, Hg concentrations were higher than the threshold level that may cause decreased hatchability and aberrant nesting behavior in some avian species. Concentrations of Cd in egg content and Ba in egg content and shell increased with an increase in egg breadth/length ratio, whereas Hg in egg content showed an opposite trend in black-footed albatrosses. Since egg breadth/length ratio is known to increase with the age of mother bird, this result may imply that concentrations of these elements in eggs vary with age of mother bird. In blood of black-footed albatross chicks, concentration of Hg was highest among the toxic elements and the Hg concentration showed an increase in the later growth stages. In contrast, concentration of Sr in blood decreased with growth stage. Since the behaviour of Sr is similar to that of Ca in animals, it is conceivable that Sr was used along with Ca for the formation of bone.     

Hydrogen sites in the dense hydrous magnesian silicate phase E: a pulsed neutron powder diffraction study

Hydrogen site positions and occupancy in the crystal structure of dense hydrous magnesium silicate (DHMS) phase E were determined for the first time by pulsed neutron powder diffraction. A fully deuterated pure phase E powder sample, which had space group \(R\overline{3} m\) and lattice parameters of a = 2.97065(8) Å and c = 13.9033(4) Å, was synthesized at 15 GPa and 1100 °C. Through quantitative evaluation of refined structure parameters obtained with sufficient spatial resolution and very high signal-to-background ratio, we conclude that the O–D dipoles in the refined phase E structure are tilted by 24° from the direction normal to the layers of edge-shared MgO₆ octahedra (octahedral layers). The tilted dipole structure of phase E is in remarkable contrast to that of brucite, Mg(OH)₂, which has dipoles exactly normal to the octahedral layer. This contrast exists because the O–Si–O bonding unique in the phase E structure connects two adjacent octahedral layers and thereby reduces the interlayer O···O distance. This shrinkage of the interlayer distance induces the tilting of the O–D dipole and also generates unique O–D···O hydrogen bonding connecting all the layers in the phase E structure.     

Seasonal variations in the nitrogen isotopic composition of settling particles at station K2 in the western subarctic North Pacific

Intensive observations using hydrographical cruises and moored sediment trap deployments during 2010 and 2012 at station K2 in the North Pacific Western Subarctic Gyre (WSG) revealed seasonal changes in δ ¹⁵N of both suspended and settling particles. Suspended particles (SUS) were collected from depths between the surface and 200 m; settling particles by drifting sediment traps (DST; 100–200 m) and moored sediment traps (MST; 200 and 500 m). All particles showed higher δ ¹⁵N values in winter and lower in summer, contrary to the expected by isotopic fractionation during phytoplankton nitrate consumption. We suggest that these observed isotopic patterns are due to ammonium consumption via light-controlled nitrification, which could induce variations in δ ¹⁵N(SUS) of 0.4–3.1 ‰ in the euphotic zone (EZ). The δ ¹⁵N(SUS) signature was reflected by δ ¹⁵N(DST) despite modifications during biogenic transformation from suspended particles in the EZ. δ ¹⁵N enrichment (average: 3.6 ‰) and the increase in C:N ratio (by 1.6) in settling particles suggests year-round contributions of metabolites from herbivorous zooplankton as well as TEPs produced by diatoms. Accordingly, seasonal δ ¹⁵N(DST) variations of 2.4–7.0 ‰ showed a significant correlation with primary productivity (PP) at K2. By applying the observed δ ¹⁵N(DST) vs. PP regression to δ ¹⁵N(MST) of 1.9–8.0 ‰, we constructed the first annual time-series of PP changes in the WSG. This new approach to estimate productivity can be a powerful tool for further understanding of the biological pump in the WSG, even though its validity needs to be examined carefully.