Relationship of Avalonian and Cadomian terranes to Grenville and Pan-African events

Suturing of the supercontinent Rodinia in the Grenville event (˜ 1000 Ma) was followed by rifting in the late Proterozoic (˜ 800-700 Ma), reorganization to Gondwana in the Pan-African (˜ 700-500 Ma) and further accretion to develop Pangea at the end of the Paleozoic. One of the Rodinian rifts followed part of the Grenville suture, it produced the margin of eastern North America and southern Baltica and the contrasting margin of west Gondwana in present South America. The Paleozoic accretionary wedge against the Grenville-age margin of North America and Baltica contains Avalonian/Cadomian terranes that exhibit Pan-African erogenic events ± sediments apparently developed while the terranes were in or near Gondwana. These terranes carry lower-Paleozoic fauna (Acado-Baltic) that are not indigenous to North America and Baltica.U---Pb zircon ages range from 1500-1000 Ma in Grenville terranes and from 800–500 Ma with minor inheritance in Avalonian terranes; they are generally much older in Cadomian terranes, implying very little resetting during Pan-African events. T_DM ages are generally 2000–1200 Ma in Grenville terranes, 1300–600 Ma in Avalonian terranes and 2000–1200 in Cadomian terranes. These summary data show that: (1) the Grenville orogenic event produced almost no juvenile crust; (2) the Avalonian terranes of North America contain crust that evolved primarily in the late Proterozoic, possibly as a mixture of juvenile Pan-African material and Grenville or slightly older material; (3) the Cadomian terranes of Europe consist of old (middle-Proterozoic to Archean) crust with minor juvenile Pan-African material. The Avalonian terranes apparently evolved near, and partly on, the Grenville-age crust now in South America during the intense orogeny associated with rotation of Gondwana away from North America. The Cadomian terranes of Europe, however, appear to be fragments of other parts of Gondwana, probably West Africa.     

Calcareous algae and cyanobacteria

Algae is an informal term used to describe a broad group of simple organisms from the plant kingdom. The organisms included within this grouping are aquatic photosynthetic biota with an extensive range of life habits and forms. These organisms range from micron-sized unicellular forms to giant seaweeds and kelps, which can grow to several metres long. Both benthic and planktonic modes of life are known and display a wide variety of life cycles.     

Geophysical surveys to help map buried igneous intrusions,Snowdonia, North Wales,UK

The geology of the Snowdonia National Park in North Wales comprises a mixture of Lower Palaeozoic shallow marine sediments, acidic igneous rocks and basic intrusions of the Welsh Basin that were subsequently deformed during the Caledonian Orogeny. Thin igneous intrusions are challenging to map due to variable surface exposures, their intrusive origin, structural deformation and burial by glacial sediments. This study used a combination of traditional geological techniques, near‐surface geophysical surveys and remote sensing to detect and map a buried dolerite sheet intrusion. Both simple and mathematical analysis of magnetic anomalies and numerical modelling allowed the dolerite position, depths and target widths to be determined. Results showed that calibrated magnetic surveys can characterize buried igneous bodies in such mountainous environments.     

Student Learning in an Introductory GIS Course: Using a Project‐Based Approach

Introductory courses in Geographic Information Science (GIS) expose students to the concepts and practices necessary for future academic and professional use of GIS tools. Traditional GIS courses balance lectures in the theories of GIS with pre‐built and pre‐packaged lab activities to learn the practices of GIS. This article presents a case study of an experimental introductory course in which students conducted novel, independent project‐based group research under the supervision of graduate or advanced undergraduate students enrolled in the course, culminating in a class presentation and publication quality paper. Surveys and interviews indicated that students reacted more positively to project‐based group research than to traditional activities. Students felt the projects better prepared them for ‘real world’ applications of GIS, and recommend project‐based group research in other GIS coursework. Additionally, our findings indicate that students appreciate interactions with peers of varying skill levels and experiences, as these broaden their capabilities to work with other GIS users.     

Habitat Restoration from an Ecosystem Goods and Services Perspective: Application of a Spatially Explicit Individual-Based Model

Estuarine ecosystems provide many services to humans, but these ecosystems are also under pressure from human development, which has led to large investments in habitat protection and restoration. Restoration in estuaries is typically focused on emergent and submerged vegetation with the goal of achieving target areal coverage based on historic conditions. Such restoration targets assume no spatial heterogeneity in habitat value and bypass the functional target of restoring or maintaining delivery of ecosystem goods and services (EGS). We have developed a spatially explicit individual-based behavioral model intended to explore the functional role of habitat restoration on EGS delivery in an index system (Tampa Bay, FL) and for an index EGS (recreational fishing). Model scenarios are based on interaction of inter-annual differences in salinity/temperature patterns (wet, dry, average) with hindcasted “increases” in coverage and distribution of seagrass. Model predictions indicated that the effect of seagrass restoration to historic (1950s) levels on both fish and fishery production is dependent on salinity and temperature. This dependence is based on predicted fish response both to habitat changes and the effective spatial scale of different habitat components. Overall, average salinity/temperature conditions facilitated the highest positive functional response to seagrass restoration with extreme wet/dry years yielding lower or even negative functional responses, but these responses were localized and not homogenous about the estuary. The results of this study provide a methodology for using functional targets in restoration planning and highlight the importance of considering the entire habitat mosaic in valuing restored habitat from an EGS perspective.     

Effect of heat treatment on dynamic properties of selected rock types taken from the Salt Range in Pakistan

Temperature is one of the variables that influence the elasto-plastic behavior and integrity of rock outcrops. Fluctuations in temperature can trigger alteration of some of the mineral properties and impact the brittle-plastic transition. Initiation and propagation of thermally induced tension cracks tend to weaken most rock types. The principal goal of this study was to anticipate impacts of thermal stress-strain cycles on the dynamic response of representative rock units exposed in the Khewra Gorge of the Salt Range Punjab of Pakistan. Ten types of sedimentary rock units were sampled, including marl, dolomite, three types of limestone, and five different sandstones exhibiting varying characteristics in outcrop. Boulder specimens were collected from the field and transported to the laboratory to prepare 50 drill cores that could be subjected to thermal cycling between 50 and 200 °C in increments of 50 °C. Room temperature core samples were tested using an Erudite resonance frequency meter to measure their Q-factors and the resonance frequency (F_r) at an applied loading frequency of 7 KHz with 0.01 V output voltage. Results suggest that thermal cycling tends to reduce the dynamic Young’s modulus (E_d) and Q-factor. Other parameters, such as damping ratio (ξ), specific damping capacity (Ψ), and loss factor (?) appeared to increase with increasing temperature cycles, likely as a result of developing thermally induced tensile fractures. The resultant values of the null hypothesis (t-critical and t-stats) suggests that the null hypothesis can be discarded because there was no observable difference between the measured and expected values for the cores tested. The observations and data emanating from this study might be useful in designing low-level radioactive waste landfills, nuclear waste repositories, and deep underground excavations where the increased temperature could alter the mechanical behavior of the parent rock mass.     

Salt thickness and composition influence rift structural style,northern North Sea,offshore Norway

“Salt” giants are typically halite‐dominated, although they invariably contain other evaporite (e.g. anhydrite, bittern salts) and non‐evaporite (e.g. carbonate, clastic) rocks. Rheological differences between these rocks mean they impact or respond to rift‐related, upper crustal deformation in different ways. Our understanding of basin‐scale lithology variations in ancient salt giants, what controls this and how this impacts later rift‐related deformation, is poor, principally due to a lack of subsurface datasets of sufficiently regional extent. Here we use 2D seismic reflection and borehole data from offshore Norway to map compositional variations within the Zechstein Supergroup (ZSG) (Lopingian), relating this to the structural styles developed during Middle Jurassic‐to‐Early Cretaceous rifting. Based on the proportion of halite, we identify and map four intrasalt depositional zones (sensu Clark et al., Journal of the Geological Society, 1998, 155, 663) offshore Norway. We show that, at the basin margins, the ZSG is carbonate‐dominated, whereas towards the basin centre, it becomes increasingly halite‐dominated, a trend observed in the UK sector of the North Sea Basin and in other ancient salt giants. However, we also document abrupt, large magnitude compositional and thickness variations adjacent to large, intra‐basin normal faults; for example, thin, carbonate‐dominated successions occur on fault‐bounded footwall highs, whereas thick, halite‐dominated successions occur only a few kilometres away in adjacent depocentres. It is presently unclear if this variability reflects variations in syn‐depositional relief related to flooding of an underfilled presalt (Early Permian) rift or syn‐depositional (Lopingian) rift‐related faulting. Irrespective of the underlying controls, variations in salt composition and thickness influenced the Middle Jurassic‐to‐Early Cretaceous rift structural style, with diapirism characterising hangingwall basins where autochthonous salt was thick and halite‐rich and salt‐detached normal faulting occurring on the basin margins and on intra‐basin structural highs where the salt was too thin and/or halite‐poor to undergo diapirism. This variability is currently not captured by existing tectono‐stratigraphic models largely based on observations from salt‐free rifts and, we argue, mapping of suprasalt structural styles may provide insights into salt composition and thickness in areas where boreholes are lacking or seismic imaging is poor.     

Estimating Solar Flux Density at Low Radio Frequencies Using a Sky Brightness Model

Sky models have been used in the past to calibrate individual low radio frequency telescopes. In this article we generalize this approach from a single antenna to a two element interferometer, and formulate the problem in a way that allows us to estimate the flux density of the Sun using the normalized cross-correlations (visibilities) measured on a low resolution interferometric baseline. For wide field-of-view instruments, typically the case at low radio frequencies, this approach can provide robust absolute solar flux calibration for well characterized antennas and receiver systems. It can provide a reliable and computationally lean method for extracting parameters of physical interest using a small fraction of the voluminous interferometric data, which can be computationally prohibitively expensive to calibrate and image using conventional approaches. We demonstrate this technique by applying it to data from the Murchison Widefield Array and assess its reliability.     

A numerical investigation of the JASIN atmospheric boundary layer

A numerical model of the cloudy marine boundary layer is described and used to investigate the role of entrainment instability on the developing boundary layer. In general, previous studies have been limited to boundary layers capped by convectively stable inversions or have described only cumulus fields. Here we extend a stratus-capped boundary-layer model to consider the transition to a convectively unstable cloud layer capped by an inversion across which there is a rapid decrease in wet-bulb or equivalent potential temperature. In this case, the inversion is very active and the entrainment rate is determined by the active instability at the interface, in contrast to the mean turbulent motion within the boundary layer.The model is used to interpret the observed boundary layer from the JASIN experiment. Cool, dry air is modified by prolonged passage over increasingly warmer ocean which leads to the development of a convectively unstable cloud layer.     

On the onset of entrainment instability over the ocean

The marine atmospheric boundary layer is characterized by cool temperatures and high humidity. Clouds are observed over most of the oceans. It is generally accepted that these overcast cloud decks break up into scattered fragments due to cloud-top entrainment instability. That is, if the air above the boundary layer is sufficiently cool and dry relative to cloud top, the buoyancy flux will be directed upwards and entrainment can occur freely.A boundary-layer model is used to test the sensitivity of the model atmosphere to the various processes which promote the onset of cloud-top entrainment instability. It is found that the transition from a solid cloud deck to scattered cumulus clouds depends on a rate process. The cloud cover is sensitive to mesoscale variations in sea surface temperature only if the cloud-top inversion is sufficiently weak.