Modelling the effects of Zostera noltei meadows on sediment dynamics: application to the Arcachon lagoon

A three-dimensional model has been modified to describe the complex interactions between hydrodynamics, sediment dynamics and biological parameters in the presence of Zostera noltei. The model treats seagrass leafs as flexible blades that bend under hydrodynamic forcing and alter the local momentum and turbulence fluxes and, therefore, the benthic shear conditions; these changes cause related changes to the mass balance at the boundary of the bed, in turn affecting the suspended matter in the column and ultimately primary productivity and the growth of the dwarf-grass. Modelling parameters related to the impact of Z. noltei to the local flow and to erosion and deposition rates were calibrated using flume experimental measurements; results from the calibration of the model are presented and discussed. The coupled model is applied in the Arcachon Bay, an area with high environmental significance and large abundance of dwarf-grass meadows. In the present paper, results from preliminary applications of the model are presented and discussed; the effectiveness of the coupled model is assessed comparing modelling results with available field measurements of suspended sediment concentrations and seagrass growth parameters. The model generally reproduces sediment dynamics and dwarf-grass seasonal growth in the domain efficiently. Investigations regarding the effects of the vegetation to the near-bed hydrodynamics and to the sediment suspension in the domain show that dwarf-grass meadows play an important part to velocity attenuation and to sediment stabilisation, with flow and suspended sediment concentrations damping, compared to an unvegetated state, to reach 35–50 and 65 %, respectively, at peak seagrass growth.     

Impacts of uncertain river flow data on rainfall‐runoff model calibration and discharge predictions

In order to quantify total error affecting hydrological models and predictions, we must explicitly recognize errors in input data, model structure, model parameters and validation data. This paper tackles the last of these: errors in discharge measurements used to calibrate a rainfall‐runoff model, caused by stage–discharge rating‐curve uncertainty. This uncertainty may be due to several combined sources, including errors in stage and velocity measurements during individual gaugings, assumptions regarding a particular form of stage–discharge relationship, extrapolation of the stage–discharge relationship beyond the maximum gauging, and cross‐section change due to vegetation growth and/or bed movement. A methodology is presented to systematically assess and quantify the uncertainty in discharge measurements due to all of these sources. For a given stage measurement, a complete PDF of true discharge is estimated. Consequently, new model calibration techniques can be introduced to explicitly account for the discharge error distribution. The method is demonstrated for a gravel‐bed river in New Zealand, where all the above uncertainty sources can be identified, including significant uncertainty in cross‐section form due to scour and re‐deposition of sediment. Results show that rigorous consideration of uncertainty in flow data results in significant improvement of the model's ability to predict the observed flow. Copyright © 2010 John Wiley & Sons, Ltd.     

Human impact on the transport of terrigenous and anthropogenic elements to peri-alpine lakes (Switzerland) over the last decades

Terrigenous (Sc, Fe, K, Mg, Al, Ti) and anthropogenic (Pb and Cu) element fluxes were measured in a new sediment core from Lake Biel (Switzerland) and in previously well-documented cores from two upstream lakes (Lake Brienz and Lake Thun). These three large peri-alpine lakes are connected by the Aare River, which is the main tributary to the High Rhine River. Major and trace element analysis of the sediment cores by inductively coupled plasma mass spectrometry (ICP-MS) shows that the site of Lake Brienz receives three times more terrigenous elements than the two other studied sites, given by the role of Lake Brienz as the first major sediment sink located in the foothills of the Alps. Overall, the terrigenous fluxes reconstructed at the three studied sites suggest that the construction of sediment-trapping reservoirs during the twentieth century noticeably decreased the riverine suspended sediment load at a regional scale. In fact, the extensive river damming that occurred in the upstream watershed catchment (between ca. 1930 and 1950 and up to 2,300 m a.s.l.) and that significantly modified seasonal suspended sediment loads and riverine water discharge patterns to downstream lakes noticeably diminished the long-range transport of (fine) terrigenous particles by the Aare River. Concerning the transport of anthropogenic pollutants, the lowest lead enrichment factors (EFs Pb) were measured in the upstream course of the Aare River at the site of Lake Brienz, whereas the metal pollution was highest in downstream Lake Biel, with the maximum values measured between 1940 and 1970 (EF Pb > 3). The following recorded regional reduction in aquatic Pb pollution started about 15 years before the actual introduction of unleaded gasoline in 1985. Furthermore, the radiometric dating of the sediment core from Lake Biel identifies three events of hydrological transport of artificial radionuclides released by the nuclear reactor of Mühleberg located at more than 15 km upstream of Lake Biel for the time period 1970–2000.     

Influence of uncertain boundary conditions and model structure on flood inundation predictions

In this study, the GLUE methodology is applied to establish the sensitivity of flood inundation predictions to uncertainty of the upstream boundary condition and bridges within the modelled region. An understanding of such uncertainties is essential to improve flood forecasting and floodplain mapping. The model has been evaluated on a large data set. This paper shows uncertainty of the upstream boundary can have significant impact on the model results, exceeding the importance of model parameter uncertainty in some areas. However, this depends on the hydraulic conditions in the reach e.g. internal boundary conditions and, for example, the amount of backwater within the modelled region. The type of bridge implementation can have local effects, which is strongly influenced by the bridge geometry (in this case the area of the culvert). However, the type of bridge will not merely influence the model performance within the region of the structure, but also other evaluation criteria such as the travel time. This also highlights the difficulties in establishing which parameters have to be more closely examined in order to achieve better fits. In this study no parameter set or model implementation that fulfils all evaluation criteria could be established. We propose four different approaches to this problem: closer investigation of anomalies; introduction of local parameters; increasing the size of acceptable error bounds; and resorting to local model evaluation. Moreover, we show that it can be advantageous to decouple the classification into behavioural and non-behavioural model data/parameter sets from the calculation of uncertainty bounds.     

On the Effect of Surface Heat-Flux Heterogeneities on the Mixed-Layer-Top Entrainment

We used a set of large-eddy simulations to investigate the effect of one-dimensional stripe-like surface heat-flux heterogeneities on mixed-layer top entrainment. The profiles of sensible heat flux and the temporal evolution of the boundary-layer depth revealed decreased entrainment for small heat-flux amplitudes and increased entrainment for large heat-flux amplitudes, compared to the homogeneously-heated mixed layer. For large heat-flux amplitudes the largest entrainment was observed for patch sizes in the order of the boundary-layer depth, while for significantly smaller or larger patch sizes entrainment was similar as in the homogeneous case. In order to understand the underlying physics of this impact, a new approach was developed to infer local information on entrainment by means of the local flux divergence. We found an entrainment maximum over the centre of the stronger heated surface patch, where thermal energy is accumulated by the secondary circulation (SC) that was induced by the surface heterogeneity. Furthermore, we observed an entrainment maximum over the less heated patch as well, which we suppose is to be linked to the SC-induced horizontal flow convergence at the top of the convective boundary layer (CBL). For small heat-flux amplitudes a counteracting effect dominates that decreases entrainment, which we suppose is the horizontal advection of cold air in the lower, and warm air in the upper, CBL by the SC, stabilizing the CBL and thus weakening thermal convection. Moreover, we found that a mean wind can reduce the heterogeneity-induced impact on entrainment. If the flow is aligned perpendicular to the border between the differentially-heated patches, the SC and thus its impact on entrainment vanishes due to increased horizontal mixing, even for moderate wind speeds. However, if the flow is directed parallel to the border between the differentially-heated patches, the SC and thus its impact on entrainment persists.     

The Use of Invertebrates in Ground Water Monitoring: A Rising Research Field

The use of invertebrates as biomonitors of ground water quality is a relatively new approach that has come of age with the development of ground water ecology. The benefits of such an approach are illustrated by four examples of field biomonitoring from several sites in various hydrogeological settings. Contamination of the interstitial zone by heavy metals in some sectors of the Rhóne River (France) was shown by the scarcity of insect species; sewage pollution in the saturated zone of a karstic aquifer was indicated by the low relative abundances of stygobites as compared with those of stygophiles and stygoxenes; and enrichment with organic matter of an underflow was clearly demonstrated by the extremely high density of ground water invertebrates such as oligochaetes, ostracods, and isopods. Examination of the spatial changes in the composition and abundance of invertebrate assemblages was also useful in determining the direction and intensity of water fluxes between a river and its underflow, as well as in delineating the reduced or oxidized zones in a manganese-polluted aquifer. Finally, the selected case studies emphasized the variety of methodological approaches that could be developed in ground water contamination biomonitoring, as well as the complementary and sometimes new information provided by this innovative method in comparison with that obtained by conventional pollution monitoring techniques.     

Ocean currents determine functional connectivity in an Antarctic deep‐sea shrimp

The coherency among larval stages of marine taxa, ocean currents and population connectivity is still subject to discussion. A common view is that organisms with pelagic larval stages have higher dispersal abilities and therefore show a relatively homogeneous population genetic structure. Contrary to this, local genetic differentiation is assumed for many benthic direct developers. Specific larval or adult migratory behavior and hydrographic effects may significantly influence distribution patterns, rather than passive drifting abilities alone. The Southern Ocean is an ideal environment to test for the effects of ocean currents on population connectivity as it is characterized by several well‐defined and strong isolating current systems. In this study we studied the genetic structure of the decapod deep‐sea shrimp Nematocarcinus lanceopes, which has planktotrophic larval stages. We analysed 194 individuals from different sample localities around the Antarctic continent using nine microsatellite markers. Consistent with a previous study based on mitochondrial DNA markers, primarily weak genetic patterns among N. lanceopes populations around the continent were found. Using ocean resistance modeling approaches we were able to show that subtle genetic differences among populations are more likely explained by ocean currents rather than by geographic distance for the Atlantic Sector of the Southern Ocean.     

Rapid biotic molecular transformation of fulvic acids in a karst aquifer

The study of molecular transformation processes of dissolved organic carbon (DOC) in the environment significantly contributes to a better understanding of the global biogeochemical organic matter cycle. In an oxic karst groundwater system, in which the most powerful abiotic DOC degradative reactions, photodegradation and metal-mediated redox chemistry, are at best marginal contributors, a near complete turnover of fulvic acids (FAs) has been observed within decades (∼60 years). Depletion of oxygen for a very extensive range of aliphatic and aromatic carbon chemical environments has been confirmed as well as the formation of novel classes of compounds, suggesting a major contribution from biotic processes. From these results we infer that FAs must be perceived as a rather active participant in the global carbon cycle. Molecular-level alterations of such magnitude and rapidity on such short-time scales ought to be considered as widespread in the processing of “refractory” DOC in the environment.     

Crustal structure of the Eastern Alps along the TRANSALP profile from wide-angle seismic tomography

The objective of the TRANSALP project is an investigation of the Eastern Alps with regard to their deep structure and dynamic evolution. The core of the project is a 340-km-long seismic profile at 12°E between Munich and Venice. This paper deals with the P-wave velocity distribution as derived from active source travel time tomography. Our database consists of Vibroseis and explosion seismic travel times recorded at up to 100 seismological stations distributed in a 30-km-wide corridor along the profile. In order to derive a velocity and reflector model, we simultaneously inverted refractions and reflections using a derivative of a damped least squares approach for local earthquake tomography. 8000 travel time picks from dense Vibroseis recordings provide the basis for high resolution in the upper crust. Explosion seismic wide-angle reflection travel times constrain both deeper crustal velocities and structure of the crust–mantle boundary with low resolution. In the resulting model, the Adriatic crust shows significantly higher P-wave velocities than the European crust. The European Moho is dipping south at an angle of 7°. The Adriatic Moho dips north with a gentle inclination at shallower depths. This geometry suggests S-directed subduction. Azimuthal variations of the first-break velocities as well as observations of shear wave splitting reveal strong anisotropy in the Tauern Window. We explain this finding by foliations and laminations generated by lateral extrusion. Based on the P-wave model we also localized almost 100 local earthquakes recorded during the 2-month acquisition campaign in 1999. Seismicity patterns in the North seem related to the Inn valley shear zone, and to thrusting of Austroalpine units over European basement. The alignment of deep seismicity in the Trento-Vicenza region with the top of the Adriatic lower crust corroborates the suggestion of a deep thrust fault in the Southern Alps.