Grains accretion processes in a protoplanetary nebula: Conducting and insulating materials

In a previous work the authors estimated cross-sections for constructive and destructive collisions (‘constructive’ and ‘destructive’ cross-sections) related to silica grains embedded in a protoplanetary nebula. The outstanding point of the problem has induced the authors to examine more closely the physical conditions in which the accretion processes occur, and their dependence on the materials, by which the particles are probably made. In this paper the interaction processes among conducting grains (iron, graphite) and among the insulating (silica) ones have been considered. The following results have been obtained: (1) insulating grains have smaller constructive crossections than conducting; and (2) conducting grains show very large cross-sections for masses up to about 10^?9 g.     

Comet Machholz (C/2004 Q2): morphological structures in the inner coma and rotation parameters

Extensive observations of comet C/2004 Q2 (Machholz) were carried out between August 2004 and May 2005. The images obtained were used to investigate the comet’s inner coma features at resolutions between 350 and 1500 km/pixel.     

Calcium Carbonate and Phosphate Reference Materials for Monitoring Bulk and Microanalytical Determination of Sr Isotopes

In situ laser ablation analyses rely on the microanalytical homogeneity of reference materials (RMs) and a similar matrix and mass fraction between unknown samples and RMs to obtain reliable results. Suitable carbonate and phosphate RMs for determination of Sr isotope ratios in such materials are limited. Thus, we determined ⁸⁷Sr/⁸⁶Sr ratios of several carbonate (JCt‐1, JCp‐1, MACS‐1, MACS‐3) and phosphate (MAPS‐4, MAPS‐5, NIST SRM 1400, NIST SRM 1486) international RMs using dissolved samples and two different multi‐collector inductively coupled plasma‐mass spectrometers (MC‐ICP‐MS). Our Sr isotope data are in agreement with published data and have an improved measurement precision for some RMs. For MACS‐1, we present the first ⁸⁷Sr/⁸⁶Sr value. We tested the suitability of these materials for microanalytical analyses by LA‐MC‐ICP‐MS, with two different laser ablation systems: a conventional nanosecond laser and a state‐of‐the‐art femtosecond laser. We investigated the RMs micro‐homogeneity and compared the data with our solution data. Both laser ablation systems yielded identical ⁸⁷Sr/⁸⁶Sr ratios within uncertainty to the solution data for RMs with low interferences of REEs. Therefore, these carbonate and phosphate RMs can be used to achieve accurate and precise results for in situ Sr isotope investigations by LA‐MC‐ICP‐MS of similar materials.     

Structure of regional dykes and local cone sheets in the Midhyrna-Lysuskard area, Snaefellsnes Peninsula (NW Iceland)

A detailed understanding of pāhoehoe emplacement is necessary for developing accurate models of flow field development, assessing hazards, and interpreting the significance of lava morphology on Earth and other planetary surfaces. Active pāhoehoe lobes on Kīlauea Volcano, Hawai'i, were examined on 21–26 February 2006 using oblique time series stereo-photogrammetry and differential global positioning system measurements. During this time, the local discharge rate for peripheral lava lobes was generally constant at 0.0061?±?0.0019 m³/s, but the areal coverage rate of the lobes exhibited a periodic increase every 4.13?±?0.64 min. This periodicity is attributed to the time required for the pressure within the liquid lava core to exceed the cooling-induced strength of its margins. The pāhoehoe flow advanced through a series of down-slope and cross-slope breakouts, which began as ～0.2-m-thick units (i.e., toes) that coalesced and inflated to become approximately meter-thick lobes. The lobes were thickest above the lowest points of the initial topography and above shallow to reverse-facing slopes, defined relative to the local flow direction. The flow path was typically controlled by high-standing topography, with the zone directly adjacent to the final lobe margin having an average relief that was a few centimeters higher than the lava-inundated region. This suggests that toe-scale topography can, at least temporarily, exert strong controls on pāhoehoe flow paths by impeding the lateral spreading of the lobe. Observed cycles of enhanced areal spreading and inflated lobe morphology are also explored using a model that considers the statistical likelihood of sequential breakouts from active flow margins and the effects of topographic barriers.     

Multi-batch, incremental assembly of a dynamic magma chamber: the case of the Peninsula pluton granite (Cape Granite Suite, South Africa)

The S-type Peninsula Pluton (South Africa) exhibits substantial compositional variability and hosts a large variety of mafic and felsic magmatic enclaves with contrasting textures and compositions. Moreover, the pluton is characterized by mechanical concentrations of K-feldspar megacrysts, cordierite and biotite, generating a complex array of magmatic structures including schlieren, pipes, and spectacular sheeted structures. Chemical evidence indicates that the pluton is constructed incrementally by rapid emplacement of numerous magma pulses. Field, and textural data suggest that magmatic structures form by local flow at the emplacement level of highly viscous crystal-rich magmas (i.e. crystallinity up to 50?vol.%) through magma mushes assembled from older batches. At the time of arrival of relatively late magma batches, some areas within the pluton had achieved crystal fractions that allowed the material to act as a solid, whilst maintaining enough melt to prevent formation of sharp intrusional contacts. Magmatic structures represent “snapshots” of processes that operate in multiphase crystal-rich mushes and their genesis is due to mechanical and thermal instabilities in the crystal-rich magma chamber that are triggered by the emplacement of pulses of new magma derived from the melting of a compositionally variable metasedimentary source.     

L’Aquila earthquake (April 6th 2009, Central Apennine,Italy): site effect,coseismic evidence and historical development of the Collebrincioni area

The village of Collebrincioni is located right at the center of the most damaged area of the April 6th 2009 L’Aquila earthquake. It is known from historical data that this site had been heavily affected by the 1461 and 1703 seismic events and for that reason remained abandoned for a long time; the area has been settled again at the end of the 18th century with the rebuilding of the present conurbation in a new safer location. After the April 6th 2009 earthquake many evidences of coseismic effects have been found around the Collebrincioni surroundings, even though the macroseismic intensity calculated in the new settlement was found to be moderate (6 MCS). The aim of this work is to verify whether the cause of the migration from the old location can be linked to site effects; for this purpose, several measurements of horizontal to vertical spectral ratio (HVSR) have been carried out at various locations to obtain information on amplification phenomena. To allow a quick evaluation of site seismic response, without requesting any information about stratigraphical and geotechnical properties of the foundation soils, the Nakamura’s technique was adopted in this paper. Measurements of HV spectral ratio carried out in the area show relevant differences between the new and the ancient settlements confirming the hypothesis that the abandonment of the old Collebrincioni settlement can be related to the site effects which have amplified the destructive effects of the earthquakes.     

A simple method to help determine landslide susceptibility from spaceborne InSAR data: the Montescaglioso case study

On December 3, 2013, a large complex landslide was triggered SW of the town of Montescaglioso (Southern Italy), causing the destruction of roads, commercial buildings and private dwellings, as well as several direct and indirect economic losses. A set of interferometric ground measurements acquired by the Cosmo-SkyMed satellite constellation and processed by means of the SqueeSAR algorithm was used to study the pre-event slope displacements in the entire Montescaglioso municipal area. Data span from January 30, 2012, to December 2, 2013, and show average line-of-sight velocities of 1–10 mm/year in the slope sector ultimately affected by the collapse. In retrospect, a time series analysis of the radar targets was performed in order to identify and characterize all the slope instabilities in proximity of the town. This was based on the setup of characteristic thresholds of displacement. The procedure permitted to locate several areas which recurrently exceeded these previously established thresholds, in consistency with the amount of precipitation. In particular, the major source of potential hazard in the area was indeed found where the December 3, 2013, landslide eventually occurred. The results of this quick data processing technique were validated through comparison with two independently developed landslide maps. This simple method, which is not supposed to diminish the importance of geomorphologic field surveys, could improve both the accuracy and the update rate of landslide susceptibility maps. Not relying on arbitrary or empirically derived approaches, it has the advantage of computing statistically based thresholds specific for each time series. By indicating the slope sectors in higher need of deeper in situ investigation, more support could be provided to administrative bodies for the processes of risk assessment and management.     

Adriatic ‘opisthobranchs’ (Gastropoda,Heterobranchia): shedding light on biodiversity issues

We herein review the Adriatic opisthobranch fauna, provide an updated checklist of 223 species and assess their distribution at regional and country levels. New Adriatic records are provided for 67 opisthobranch taxa, adding three new records for the Italian coastline, five new records for Albania, eight for Croatia and 15 for Montenegro. The presence of Hermaea bifida (Montagu, 1815), Hermaea variopicta (Costa A., 1869) and Facelina annulicornis (Chamisso & Eysenhardt, 1821) is reported for the first time from anywhere in the Adriatic Sea. Including the new findings, our inventory includes 28 species from Albania, 163 from Croatia, 178 from the Italian coastline of the Adriatic, 41 from Montenegro and 74 from Slovenia. No records were available from Bosnia and Hercegovina. Ninety species (40.4%) are widespread, and were recorded from all three main divisions (Northern, Western and Eastern Adriatic), whilst 79 species (35.4%) were reported from only one of them. At sub‐division levels, the Albanian inventory is the most dissimilar to the other country/regional lists, presumably because of the lack of targeted field surveys. The highest similarity is observed amongst the Western Adriatic, Croatia and the Italian Ionian coastline. Seven alien, one possible alien and three cryptogenic opisthobranchs were reliably recorded from the Adriatic Sea. The first Mediterranean records of five species were in the Adriatic Sea, of which four species have not been found elsewhere in the Mediterranean. Shipping and aquaculture are the probable pathways for most of the alien species. A steady rate of one to two alien introductions per decade since the 1970s was evident. The Northern Adriatic coasts are the most affected by alien invasions, probably due to repeated local introductions along with shellfish transfers (oysters, mussels, Manila clams), and heavy maritime transport.     

Asbestos fibre identification vs. evaluation of asbestos hazard in ophiolitic rock mélanges,a case study from the Ligurian Alps (Italy)

In recent years, the high incidence of harmful health effects through inhalation of airborne asbestos from amphibole-bearing rock mélanges has been thoroughly documented. Here, we present a field-based, multi-scale geological approach aimed at illustrating the occurrence of amphibole fibrous mineralisation in an ophiolitic suite from the Ligurian Alps (Italy) and discussing the implication on in situ determination of the asbestos hazard. The rock mélange is composed of plurimetre-sized blocks of different lithotypes (metagabbro, serpentinite, chloritoschist) juxtaposed by the meaning of tectonic structures. The geological-structural survey revealed that the fibrous mineralisation is localised in specific structural sites of the rock volume, including veins and schistosity. Both micro-chemical and crystal structure analyses on selected fibrous samples revealed that actinolite fibres grow in veins within the metagabbro and in chloritoschists, while fibrous tremolite occurs in serpentinite schistosity. The morphological features of these amphibole fibres have been analysed in TEM images and used for classifying them as “asbestiform” or “non-asbestiform”. The results show that the asbestos hazard determination is not unequivocally identified when different procedures for asbestos fibre identification and classification are applied. This may have impact on normatives and regulations in defining environmental hazards due to asbestos occurrence.