The heating history of Vesta and the onset of differentiation

In this work, we study the link between the evolution of the internal structure of Vesta and thermal heating due to ²⁶Al and ⁶⁰Fe and long‐lived radionuclides, taking into account the chemical differentiation of the body and the affinity of ²⁶Al with silicates. We explored several thermal and structural scenarios differing in the available strength of energy due to the radiogenic heating and in the postsintering macroporosity. By comparing them with the data supplied by the HEDs and the Dawn NASA mission, we use our results to constrain the accretion and differentiation time as well as the physical properties of the core. Differentiation takes place in all scenarios in which Vesta completes its accretion in <1.4 Ma after the injection of ²⁶Al into the solar nebula. In all those scenarios where Vesta completes its formation in <1 Ma from the injection of ²⁶Al, the degree of silicate melting reaches 100 vol% throughout the whole asteroid. If Vesta completed its formation between 1 and 1.4 Ma after ²⁶Al injection, the degree of silicate melting exceeds 50 vol% over the whole asteroid, but reaches 100 vol% only in the hottest, outermost part of the mantle in all scenarios where the porosity is lower than 5 vol%. If the formation of Vesta occurred later than 1.5 Ma after the injection of ²⁶Al, the degree of silicate melting is always lower than 50 vol% and is limited only to a small region of the asteroid. The radiation at the surface dominates the evolution of the crust, which ranges in thickness from 8 to about 30 km after 5 Ma: a layer about 3–20 km thick is composed of primitive unmelted chondritic material, while a layer of about 5–10 km is eucritic.     

Radar Backscatter from Underdense Meteors and Diffusion Rates

Many meteoroids burn up between about 120 km and 70 km, deposit metals and dust and form ionized trails which are detected by radars. Model studies about the influence of neutral or positively charged background dust on the ambipolar diffusion indicate that significant smaller decay times should be observed for weak meteor echoes compared to strong meteor echoes which can affect the estimation of temperatures. The variation of meteor decay times in dependence on echo strength, height, and season was studied using radar observations at 69° N, 22° S, and 67° S. Significantly reduced decay times were found for weak echoes below about 88 km at low latitudes throughout the year, and at high latitudes with the exception of summer. In summer at high latitudes, decreasing decay times of weak and strong meteors are observed at altitudes below about 85 km during the appearance of noctilucent clouds. The impact of reduced decay times on the estimation of neutral temperatures from decay times is discussed.     

Multiple solutions in preliminary orbit determination from three observations

Charlier’s theory (1910) provides a geometric interpretation of the occurrence of multiple solutions in Laplace’s method of preliminary orbit determination, assuming geocentric observations. We introduce a generalization of this theory allowing to take into account topocentric observations, that is observations made from the surface of the rotating Earth. The generalized theory works for both Laplace’s and Gauss’ methods. We also provide a geometric definition of a curve that generalizes Charlier’s limiting curve, separating regions with a different number of solutions. The results are generically different from Charlier’s: they may change according to the value of a parameter that depends on the observations.     

N-body integrators with individual time steps from Hierarchical splitting

We review the implementation of individual particle time-stepping for N-body dynamics. We present a class of integrators derived from second order Hamiltonian splitting. In contrast to the usual implementation of individual time-stepping, these integrators are momentum conserving and show excellent energy conservation in conjunction with a symmetrized time step criterion. We use an explicit but approximate formula for the time symmetrization that is compatible with the use of individual time steps. No iterative scheme is necessary. We implement these ideas in the HUAYNO¹ code and present tests of the integrators and show that the presented integration schemes shows good energy conservation, with little or no systematic drift, while conserving momentum and angular momentum to machine precision for long term integrations.     

Prediction of Stellar Atmospheric Parameters using Instance-Based Machine Learning and Genetic Algorithms

In this article we present a method for the automated prediction of stellar atmospheric parameters from spectral indices. This method uses a genetic algorithm (GA) for the selection of relevant spectral indices and prototypical stars and predicts their properties, using the k-nearest neighbors method (KNN). We have applied the method to predict the effective temperature, surface gravity, metallicity, luminosity class and spectral class of stars from spectral indices. Our experimental results show that the feature selection performed by the genetic algorithm reduces the running time of KNN up to 92%, and the predictive accuracy error up to 35%. This revised version was published online in July 2006 with corrections to the Cover Date.     

Matrix micrite δC and δO reveals synsedimentary marine lithification in Upper Jurassic Ammonitico Rosso limestones (Betic Cordillera, SE Spain)

Matrix micrites are a commonly used carbonate archive for the reconstruction of past environmental parameters, but one that is submitted to known limitations. Main reasons for the often ambiguous value of many micrite-based isotope data sets are the unknown origin of the micrite components and their poorly resolved diagenetic history. Here we present carbon and oxygen-isotope data retrieved from Oxfordian to Tithonian Ammonitico Rosso nodular micrites sampled from three sections in the Betic Cordillera (Southern Spain). All three sections were correlated and sampled using a rigorous biostratigraphic framework. A noteworthy feature is that analyzed matrix micrites are more conservative in terms of their isotopic composition than other carbonate materials commonly considered to resist diagenetic alteration under favourable circumstances. Remarkably, this refers not only to δ¹³C ratios, which reflect the typical Late Jurassic global trend, but also to δ¹⁸O ratios that range around 0.3‰. The ¹⁸O-enriched oxygen-isotope ratios are considered to represent diagenetic stabilization of carbonate ooze under the influence of marine porewaters within the sediment–water interphase (i.e., the immature sedimentary section, usually submitted to biogenic activity). This interpretation agrees with the very early lithification of micrite nodules with cements precipitated from marine porewaters, enriched by the dissolution of aragonite skeletals (i.e., ammonite shells). According to the model proposed, low sedimentation rates as well as rapid early marine differential cementation, under the influence of currents and seawater pumping, affected the sediment–water interphase of epioceanic swells where deposition resulted in early lithified Ammonitico Rosso facies. The data obtained show that special care must be taken to prevent oversimplified interpretations of carbonate archives, particularly in the context of epioceanic settings.     

Grains accretion processes in a proto-planetary nebula

Some mechanisms which are expected to produce the growth of dust grains in the protosolar nebula are studied during the isothermal and the adiabatic phase of the gravitational collapse. Owing to the low sticking efficiency in the grain-grain collisions and also to the impossibility of gas capture by solid particles in the physical environment considered, the main result is the production in about 10⁶ yr of a set of particles similar in mass. The obtained mass limit (10⁻⁸–10⁻⁹ g) depends on the physical properties of the grains, and seems to be independent of the turbulence model used for the gas motion.     

Comparative Study of the Three-Dimensional Thermodynamical Structure of the Inner Corona of Solar Minimum Carrington Rotations 1915 and 2081

Using differential emission measure tomography (DEMT) based on time series of EUV images, we carry out a quantitative comparative analysis of the three-dimensional (3D) structure of the electron density and temperature of the inner corona (\(r<1.25\,\mathrm{R}_{\odot}\)) between two specific rotations selected from the last two solar minima, namely Carrington Rotations (CR)1915 and CR-2081. The analysis places error bars on the results because of the systematic uncertainty of the sources. While the results for CR-2081 are characterized by a remarkable north–south symmetry, the southern hemisphere for CR-1915 exhibits higher densities and temperatures than the northern hemisphere. The core region of the streamer belt in both rotations is found to be populated by structures whose temperature decreases with height (called “down loops” in our previous articles). They are characterized by plasma \(\beta\gtrsim1\), and may be the result of the efficient dissipation of Alfvén waves at low coronal heights. The comparative analysis reveals that the low latitudes of the equatorial streamer belt of CR-1915 exhibit higher densities than for CR-2081. This cannot be explained by the systematic uncertainties. In addition, the southern hemisphere of the streamer belt of CR-1915 is characterized by higher temperatures and density scale heights than for CR-2081. On the other hand, the coronal hole region of CR-1915 shows lower temperatures than for CR-2081. The reported differences are in the range \({\approx}\,10\,\mbox{--}\,25\%\), depending on the specific physical quantity and region that is compared, as fully detailed in the analysis. For other regions and/or physical quantities, the uncertainties do not allow assessing the thermodynamical differences between the two rotations. Future investigation will involve a DEMT analysis of other Carrington rotations selected from both epochs, and also a comparison of their tomographic reconstructions with magnetohydrodynamical simulations of the inner corona.     

Scientific prospects for spectroscopy of the gamma-ray burst prompt emission with SVOM

SVOM (Space-based multi-band astronomical Variable Objects Monitor) is a Sino-French space mission dedicated to the study of Gamma-Ray Bursts (GRBs) in the next decade, capable to detect and localise the GRB emission, and to follow its evolution in the high-energy and X-ray domains, and in the visible and NIR bands. The satellite carries two wide-field high-energy instruments: a coded-mask gamma-ray imager (ECLAIRs; 4–150 keV), and a gamma-ray spectrometer (GRM; 15–5500 keV) that, together, will characterise the GRB prompt emission spectrum over a wide energy range. In this paper we describe the performances of the ECLAIRs and GRM system with different populations of GRBs from existing catalogues, from the classical ones to those with a possible thermal component superimposed to their non-thermal emission. The combination of ECLAIRs and the GRM will provide new insights also on other GRB properties, as for example the spectral characterisation of the subclass of short GRBs showing an extended emission after the initial spike.     

The Ferrara hard X-ray facility for testing/calibrating hard X-ray focusing telescopes

We will report on the current configuration of the X-ray facility of the University of Ferrara recently used to perform reflectivity tests of mosaic crystals and to calibrate the experiment JEM–X aboard Integral. The facility is now located in the technological campus of the University of Ferrara in a new building (named LARIX laboratory= ̳LARge ̳Italian ̳X-ray facility) that includes a tunnel 100 m long with, on the sides, two large experimental rooms. The facility is being improved for determining the optical axis of mosaic crystals in Laue configuration, for calibrating Laue lenses and hard X-ray mirror prototypes.