Computational study of tetrahedral Al–Si and octahedral Al–Mg ordering in phengite

 As part of a wider study of the nature and origins of cation order–disorder in micas, a variety of computational techniques have been used to investigate the nature of tetrahedral and octahedral ordering in phengite, K₂ ^[6](Al₃Mg)^[4](Si₇Al)O₂₀(OH)₄. Values of the atomic exchange interaction parameters J _n used to model the energies of order–disorder were calculated. Both tetrahedral Al–Si and octahedral Al–Mg ordering were studied and hence three types of interaction parameter were necessary: for T–T, O–O and T–O interactions (where T denotes tetrahedral sites and O denotes octahedral sites). Values for the T–T and O–O interactions were taken from results on other systems, whilst we calculated new values for the T–O interactions. We have demonstrated that modelling the octahedral and tetrahedral sheets alone and independently produces different results from modelling a whole T–O–T layer, hence justifying the inclusion of the T–O interactions. Simulations of a whole T–O–T layer of phengite indicated the presence of short-range order, but no long-range order was observed. Received: 8 August 2002 / Accepted: 14 February 2003 Acknowledgements The authors are grateful to EPSRC (EJP) and the Royal Society (CIS) for financial support. Monte Carlo simulations were performed on the Mineral Physics Group's Beowulf cluster and the University of Cambridge's High Performance Computing Facility.     

Validation of Landslide Susceptibility Maps; Examples and Applications from a Case Study in Northern Spain

A procedure for validating landslide susceptibility maps wasapplied in a study area in northern Spain and the results obtained compared. Validationwas used to carry out sensitivity analysis for individual variables and combinationsof variables. The validity of different map-making methods was tested, as well as theutility of different types of Favourability Functions. The results obtained show thatvalidation is essential to determine the predictive value of susceptibility maps. Italso helps to better select the most suitable function and significant variables, thus improving the efficiency of the mapping process. Validation based on a temporal strategy makes it possible to derive hazard maps from susceptibility maps.     

Influence of the Load Wavelength on the Permeability of a Viscosity Interface in the Mantle

Assuming a radially stratified Newtonian mantle in a steady-state approximation, we demonstrate that the permeability of a viscosity interface at 660-km depth strongly depends on the wavelength of buoyancy forces driving the flow. The flow induced by long-wavelength loads penetrates through the boundary freely even if the viscosity increases by two orders. In contrast, the boundary is practically impermeable for short-wavelength loads located in the upper mantle. Thus, a stepwise increase of viscosity is a significant obstacle for small descending features in the upper mantle, but huge upper mantle downwellings, or upwellings formed in the-lower mantle can overcome it easily. This indicates that certain care is necessary in interpreting the seismic structure of the mantle by means of flow models. The global tomographic image includes only the first few degrees of the harmonic series and, consequently, its interpretation in terms of a present-day flow field results in a predominantly whole-mantle circulation even for extreme viscosity contrasts.     

Remote sensing detection of atmospheric pollutants by differential absorption LIDAR 510M/SODAR PA2 mobile system

Summary Air pollution problem in the Czech Republic is very complex due to large number of factors as turbulent dispersion and chemical reactions concurring in the status of the PBL. For this 3D distribution of pollutants is a key information that cannot be given by conventional monitoring stations. Combined use of DIAL lidar and sodar can give access to such information. Case studies of air pollutants transport are presented using 3D concentration fields of NO₂ and ozone measured by lidar and meteorological conditions monitored by Doppler Sodar.     

Vegetation dynamics during the late Pleistocene in the Barreirinhas region, Maranhão State, northeastern Brazil, based on carbon isotopes in soil organic matter

The study place is in the Barreirinhas region, Maranhão State, northeastern Brazil. A vegetation transect of 78 km was studied among four vegetation types: Restinga (coastal vegetation), Cerrado (woody savanna), Cerradão (dense woody savanna), and Forest, as well as three forested sites around Lagoa do Caçó, located approximately 10 km of the transect. Soil profiles in this transect were sampled for δ¹³C analysis, as well as buried charcoal fragments were used for ¹⁴C dating. The data interpretation indicated that approximately between 15,000 and ∼9000 ¹⁴C yr B.P., arboreal vegetation prevailed in the whole transect, probably due to the presence of a humid climate. Approximately between ∼9000 and 4000-3000 ¹⁴C yr B.P., there was the expansion of the savanna, probably related to the presence of drier climate. From ∼4000-3000 ¹⁴C yr B.P. to the present, the results indicated an increase in the arboreal density in the area, due to the return to a more humid and probably similar climate to the present. The presence of buried charcoal fragments in several soil depths suggested the occurrence of palaeofires during the Holocene. The vegetation dynamic inferred in this study for northeastern Brazil is in agreement with the results obtained in areas of Amazon region, based on pollen analysis of lake sediments and carbon isotope analysis of soil organic matter (SOM), implying than similar climatic conditions have affected these areas during the late Pleistocene until the present.     

Upper Pleistocene and Holocene paleosalinity and trophic state changes in relation to sea level variation in Rocha Lagoon, southern Uruguay

Paleolimnological data are presented on trophic development in relation to sea level variation in Rocha Lagoon, a 72 km² coastal lagoon in southern Uruguay. Using sediment cores that extended to ∼20,000 yr BP, analyses of grain size, organic matter, carbonate, total carbon, nutrients, and diatoms allowed us to infer changes in trophic state and paleosalinities, which were closely related to Holocene relative sea level variation. Higher trophic states were observed during regressive events, most probably due to increases in runoff and erosion as regressions progressed. Diatom Association Zones (DAZ) were identified in both cores. Those DAZ corresponding to transgressive events were dominated by marine/brackish taxa and relatively low organic matter and nutrient values, while those DAZ corresponding to regressive events showed increases in brackish/freshwater diatoms and both organic matter and nutrients. Although the lagoon formed after the first Holocene marine transgression, our data indicate the existence of a marine/brackish aquatic system during upper Pleistocene (i.e., before 15,000 yr BP), but by ∼20,000 yr BP, the system was still likely to be a semi-arid terrestrial system.     

Electrodialytic remediation of CCA-treated waste wood in pilot scale

When chromated copper arsenate (CCA)-treated wood is removed from service and turns into waste, the contents of Cu, Cr and As remain high due to the strong fixation of CCA in the wood. This high content of toxic compounds presents a disposal challenge. Incineration of CCA-treated waste wood is not allowed in Denmark; instead, the wood is to be land-filled until new methods for handling the wood are available. Since the amounts of CCA-treated wood being removed from service is expected to increase in the years to come, the need for finding alternative handling methods is very relevant. In this study, the usefulness of Electrodialytic Remediation was demonstrated for handling of CCA-treated waste wood in pilot scale. The electrodialytic remediation method, which uses a low-level direct current (DC) as the cleaning agent, combines electrokinetic movement of ions in the wood matrix with the principles of electrodialysis. It has previously been shown that it is possible to remove Cu, Cr and As from CCA-treated wood using electrodialytic remediation in laboratory scale, but until now, the method had not been studied in large scale. The pilot-scale plant used in this study was designed to contain up to 2 m³ wood chips. Six remediation experiments were carried out. In these experiments, the process was up-scaled stepwise by increasing the distance between the electrodes from initially 60 cm to finally 150 cm. The remediation time was varied between 11 and 21 days, and phosphoric acid and/or oxalic acid was used to facilitate the desorption of CCA from the wood. In the most successful of the experiments carried out, the concentration of CCA in the wood was reduced by up to 82% for Cr, 88% for Cu and at least 96% for As.     

Case study on the strategy and application of enhancement solutions to improve remediation of soils contaminated with Cu, Pb and Zn by means of electrodialysis

Numerous studies have been conducted with electrochemical removal of heavy metals from spiked kaolinite. Meanwhile, when moving from kaolinite to real soils, new factors must be taken into account—factors influencing, e.g., the buffering capacity of the soil against acidification and the adsorption/desorption processes of the heavy metals. The present study gives some examples where it is necessary to use an enhancement solution to aid desorption of Cu, Zn and Pb during electrodialytic treatment. Dependent on the composition of the pollution, different choices can be made. In the case of a Cu-polluted calcareous soil, ammonia may be used as enhancement solution, due to the formation of charged complexes between ammonia and Cu. Thus, Cu is mobile at high pH when ammonia is added and Cu can be removed without dissolving the calcareous parts. Zn is also mobilized by ammonia, but to a lesser extent than Cu. In the case of Cu, Zn and Pb at the same time, alkaline ammonium citrate may be a solution. It was shown that this enhancement solution could mobilize these three pollutants, but optimization of concentration and pH of the ammonium citrate is still needed. When choosing a remediation scheme for electrochemical treatment of an actual industrially polluted soil, this scheme must be chosen on basis of characterization of soil and pollution combination.     

Long-term deforestation in NW Spain: linking the Holocene fire history to vegetation change and human activities

The Holocene fire regime is thought to have had a key role in deforestation and shrubland expansion in Galicia (NW Spain) but the contribution of past societies to vegetation burning remains poorly understood. This may be, in part, due to the fact that detailed fire records from areas in close proximity to archaeological sites are scarce. To fill this gap, we performed charcoal analysis in five colluvial soils from an archaeological area (Campo Lameiro) and compared the results to earlier studies from this area and palaeo-ecological literature from NW Spain. This analysis allowed for the reconstruction of the vegetation and fire dynamics in the area during the last ca 11 000 yrs. In the Early Holocene, Fabaceae and Betula sp. were dominant in the charcoal record. Quercus sp. started to replace these species around 10 000 cal BP, forming a deciduous forest that prevailed during the Holocene Thermal Maximum until ～5500 cal BP. Following that, several cycles of potentially fire-induced forest regression with subsequent incomplete recovery eventually led to the formation of an open landscape dominated by shrubs (Erica sp. and Fabaceae). Major episodes of forest regression were (1) ～5500–5000 cal BP, which marks the mid-Holocene cooling after the Holocene Thermal Maximum, but also the period during which agropastoral activities in NW Spain became widespread, and (2) ～2000–1500 cal BP, which corresponds roughly to the end of the Roman Warm Period and the transition from the Roman to the Germanic period. The low degree of chronological precision, which is inherent in fire history reconstructions from colluvial soils, made it impossible to distinguish climatic from human-induced fires. Nonetheless, the abundance of synanthropic pollen indicators (e.g. Plantago lanceolata and Urtica dioica) since at least ～6000 cal BP strongly suggests that humans used fire to generate and maintain pasture.