Sedimentology of a subtidal,tide-dominated sand body in the Yellow Sea,southwest Korea

Odanam Satoe, a subtidal, tide-dominated sand body in the Yellow Sea, Korea, is linear in plan and asymmetrical in cross-section. It consists of fine- to medium-grained, well-sorted subangular sand. Bedforms consist of high-amplitude (1–2 m) sandwaves on the lower flanks of the gentler-sloping bar surface, and medium-amplitude (0.5-1 m) sandwaves on the sand body trough adjoining the steeper face, the bar crest and shallower parts of the gently sloping bar surface. Bedforms are absent on the relatively steeper bar surface, which is characterized by 2° slopes. Bedform orientation on the gentler slope is oblique by 30° to the bar crest, parallel to the sand-body crest on the crest itself, and opposite to the steeper sand-body face in the trough below the steeper slope of the bar.Bottom current velocity data show that tidal currents are semi-rotary with a flood time—velocity asymmetry over the gentler slope, and ebb time—velocity asymmetry over the steeper slope during most of the tidal cycle. Tidal-current flow parallels bar elongation over the steeper slope, whereas over the gentler slope, tidal-current flow is directed at 30° to the bar crest and changes to normal to the crest one hour prior to low tide. Bedform orientation mapped with side-scan sonar shows agreement with these flow directions.Sand dispersal around the sand body is controlled by time—velocity asymmetry and partial rotary flow directions of tidal currents. This circulation causes not only a trapezoidal mode of grain dispersal, but also westerly migration of the sand body documented from comparative bathymetric surveys in 1964 and 1980.     

Onshore Neogene stratigraphy in the North of the Alboran Sea (Betic Internal Zones): Paleogeographic implications

The Neogene is the period in which the Betic Cordillera, the Rif, and the Alboran Sea acquired their present configuration. The Neogene sediments of the Betic Internal Zones (located directly to the North of the Alboran Sea) show the effects of important periods of deformation. Deposition was clearly controlled by tectonics. Therefore the generation, evolution, and total or partial destruction of basins and the formation of new, often superimposed, basins are common phenomena, according to the locations of the basins in the Betic Cordillera and to the different geodynamic situations.     

The buckling of a corrugated carbon fibre cylinder under external hydrostatic pressure

A theoretical and an experimental investigation was carried out, where a carbon fibre corrugated circular cylinder was tested to destuction under external hydrostatic pressure. The theoretical investigation was via the finite element method, where the structure was modelled with several orthotropic axisymmetric thin-walled shell elements. The experimental observations were aided with strategically placed strain gauges. Comparison between theory and experiment showed that the experimentally observed buckling pressure was a little lower than the theoretical prediction. This may have been due to the fact that the model had slight initial geometrical imperfections in the circumferenential direction.     

Breaking wave impact on vertical and sloping coastal structures

The results of laboratory experiments on the maximum and bottom impact pressures from waves breaking directly on vertical and sloping faced coastal structures are presented. Direct wave breaking on a wall is classified as early, late, and perfect breaking. Although the present study is aimed at dealing with the type of impact resulting from the perfect breaking, to some extent the occurrence of early and late breaking are unavoidable. The wave impact pressures, therefore, have a random nature of variation from impact-to-impact under the same conditions. The maximum and bottom impact pressures on walls are treated statistically. The effects of the wall angle and foreshore slope on these two quantities are examined. The results show that for practical applications, the still-water level can be taken as the acting place for the maximum impact pressure on the wall. Simultaneous impact pressure distribution below and above still-water level may be approximated as parabolic and linear, respectively. Finally, using a wall deflection criterion, a water depth region in front of the wall is defined, where the breaking wave forces may reach a critical level.     

A time-dependent radiation condition for transient wave-structure interactions

An extrapolated version of a time-dependent nonreflecting boundary condition is developed for use at artificial boundaries to truncate infinite/semi-infinite domains for transient water wave problems. Test examples include single- and multiple-frequency flap wavemaker problems and free vibrations of a floating circular cylinder. The finite element results compare favorably to analytical solutions. It is shown that with the proposed boundary condition the numerical simulations have little reflections from the artificial boundaries.     

Harpacticoida taxocen diversity in the silty-sandy littoral zone of Kandalaksha Bay of the White Sea

The fauna composition, ecological groups, and life forms of Harpacticoids of soft littoral grounds from 15 sites off the Karelian coast in Kandalaksha Bay of the White Sea were studied. Six types of harpacticoid taxocens with different sets of dominating species are described. On silty sands with clear signs of desalination, the Stenchelia palustris taxocen is common; medium-grained sands are characterized by the Heterolaophonte minuta, Paraleptastacus kliei — Huntemannia jadensis, and Amphiascoides nanus — Scottopsyllus minor taxocens; while on coarse sands, the Ameira parvula and Ameira scotti — Mesochra lilljeborgi taxocens have developed. The diversity of the taxocens is partly explained by the differences in the grain-size composition and salinity at different sites. In addition, groups of various taxocens dwelling on the same type of the sediments were found in different minor bights of the coastline.     

Chemical leaching and specific surface area measurements of marine sediments in the evaluation of mercury contamination near cinnabar deposits

This paper investigates mercury contamination in recent marine sediment of the Tyrrhenian continental shelf near the mouths of three rivers draining an area with cinnabar deposits (M. Amiata, Italy). By means of chemical leaching, two fractions of the total mercury were distinguished: a ‘non-leachable’ fraction, consisting of mercury held in relatively stable forms and a ‘leachable’ fraction, composed of forms that are more weakly bound to the sediments. The two Hg fractions are correlated to the organic matter content, the distribution of which is strictly dependent on the sediment surface area.In order to eliminate the effects of grain size variations among the samples, the Hg concentrations were normalized to the unit of surface area (ng/m²). Following this procedure, the ‘non-leachable’ Hg was found to be concentrated mostly in a belt along the coast, while the ‘leachable’ Hg fraction was shown to accumulate largely in the zones with high depositional dynamics near the mouths of the rivers.Hypotheses to account for the discrepancy between the low concentrations of ‘leachable’ Hg in the sediment of the outer continental shelf and the high concentrations in the fauna of the same area, reported in previous papers, are presented.     

Power from the people: a documentation of non-governmental organizations' experience in community-based coastal resource management in the Philippines

Community-based coastal resource management projects facilitated by non-governmental organizations (NGOs) in the Philippines have explored approaches to decrease poverty-driven over-exploitation of coastal resources. There has been little reporting and analysis of such activities until recently. Nine case studies have recently been published and this paper presents a brief summary of these, along with an analysis of the trends and themes identified. Though diverse and covering the Philippines from Mindanao to Luzon, the case studies highlight the value of community commitment and participation in decisions regarding, and in the implementation of, resource management in ways that consider not only the bio-physical aspects of resource management but the social, economic and legal implications. Experience in working with local government has been both successful and limited. Successful projects raise hopes for further progress through education and organization of communities to improve livelihoods and protect coastal resources.     

An inexpensive instrument for measuring benthic current velocity and direction at sea

An instrument which measures the velocity and direction of benthic water currents at depths of up to 80 m is described. Characteristics of this meter include: (i) readings are not affected by water flow during sinking or retrieval; (ii) it is portable; (iii) it operates unattended; (iv) it is inexpensive; and (v) it requires only simple maintenance. A timing circuit which operates two time periods in succession is used to activate and de-activate a revolution counter and a fluidfilled compass which are mounted on a special frame and vane system. In the field, the instrument accurately measured average current velocities of up to 6 m s⁻¹. Data are presented which illustrate the usefulness of this instrument in describing the velocity and direction of benthic currents along the east coast of Australia and demonstrate a positive correlation between benthic current velocity and catch rates of the commercially-exploited spanner crab Ranina ranina.