中国汽车工业──改革开放后的重整与国际化

大规模的重整和广泛的国际化是改革开放后中国汽车工业发展的两个主要特征。作者首先从企业组织结构、生产能力与品种结构、规模经济和空间分布等四个方面分析了近二十年来中国汽车工业重整的效果及所形成的行业特征;其次根据利用的外资和技术的来源以及涉及的技术形态分析了其国际化的程度及在世界汽车工业中的位置;最后总结了中国汽车工业面临的若干问题,并提出在散乱的格局和跨国公司竞争的双重压力下,中国汽车工业正处于成长的关键时期。     

Diatoms in sediments of perennially ice-covered Lake Hoare, and implications for interpreting lake history in the McMurdo Dry Valleys of Antarctica

Diatom assemblages in surficial sediments, sediment cores, sediment traps, and inflowing streams of perennially ice-covered Lake Hoare, South Victorialand, Antarctica were examined to determine the distribution of diatom taxa, and to ascertain if diatom species composition has changed over time. Lake Hoare is a closed-basin lake with an area of 1.8 km², maximum depth of 34 m, and mean depth of 14 m, although lake level has been rising at a rate of 0.09 m yr^-1 in recent decades. The lake has an unusual regime of sediment deposition: coarse grained sediments accumulate on the ice surface and are deposited episodically on the lake bottom. Benthic microbial mats are covered in situ by the coarse episodic deposits, and the new surfaces are recolonized. Ice cover prevents wind-induced mixing, creating the unique depositional environment in which sediment cores record the history of a particular site, rather than a lake-wide integration. Shallow-water (<1 m) diatom assemblages (Stauroneis anceps, Navicula molesta, Diadesmis contenta var. parallela, Navicula peraustralis) were distinct from mid-depth (4–16 m) assemblages (Diadesmis contenta, Luticola muticopsis fo. reducta, Stauroneis anceps, Diadesmis contenta var. parallela, Luticola murrayi) and deep-water (26–31 m) assemblages (Luticola murrayi, Luticola muticopsis fo. reducta, Navicula molesta). Analysis of a sediment core (30 cm long, from 11 m water depth) from Lake Hoare revealed two abrupt changes in diatom assemblages. The upper section of the sediment core contained the greatest biomass of benthic microbial mat, as well as the greatest total abundance and diversity of diatoms. Relative abundances of diatoms in this section are similar to the surficial samples from mid-depths. An intermediate zone contained less organic material and lower densities of diatoms. The bottom section of core contained the least amount of microbial mat and organic material, and the lowest density of diatoms. The dominant process influencing species composition and abundance of diatom assemblages in the benthic microbial mats is episodic deposition of coarse sediment from the ice surface.     

A record of accelerated erosion in the recent sediments of Blelham Tarn in the English Lake district

Two frozen cores from Blelham Tarn were subsampled and measured using mineral magnetic, loss-on-ignition (LOI), radiometric, granulometric and diatom analyses. A detailed chronology was established using varves, radioisotopes and diatoms. This has enabled an accurately dated reconstruction of sedimentation over the past forty years. Despite a large increase in lake productivity, evidence suggests that the observed exponential increase in sedimentation rates can be attributed to erosion within the catchment. The predominant sediment source has been identified as surface soil. A comparison between the trend of accelerated sedimentation and the record of increased sheep stocking density for the area within which the most of the catchment lies, as well as observations of contemporary surface processes within the catchment, both suggest that much of the recent erosion is a direct response to increased pressure from sheep grazing.     

An auto-biographical approach to understanding migration: the case of Hong Kong emigrants

Summary This paper seeks to make a methodological contribution by evaluating the autobiographical approach and its application to migration research. The migration act is seen as a manifestation of an individual's identity. This is moulded by many social influences over an individual's lifecourse. The paper explores the realm of practical consciousness (Giddens 1984) using a biographical approach in an attempt to identify the values underpinning the intentions of professional emigrants from Hong Kong.     

Secondary ferrimagnetic minerals in Welsh soils: a comparison of mineral magnetic detection methods and implications for mineral formation

A study of mineral magnetic parameters was carried out on a Late Pleistocene and Holocene sedimentary sequence (of nearly 18 m) from Lake Bledowo (central Poland). Sediments of Lake Bledowo have already been analysed for bulk sediment mineralogy and biogenic materials. The mineral magnetic stratigraphy confirms the major changes in palaeo-environmental conditions that have been deduced from other methods. The most important mineral magnetic change results from the authigenetic formation of ferrimagnetic greigite, Fe₃S₄, during the beginning of lacustrine conditions (± 12 000 yr BP). Our data also indicate a detrital origin of overlying ferrimagnetic iron oxides. It is suggested that they originate from brown soils developed on the boulder clay constituting the west side of the lake shore. Variations of ferrimagnetic iron oxide size are related to the early diagenetic processes in the sediment. Larger particles are present in periods with early diagenesis of organic matter in anoxic conditions. This indicates the dissolution of fine magnetic particles by iron-oxide-reducing bacteria and results in homogeneous magnetic grain sizes, despite their origin from soils, characterized by a multimodal grain-size distribution.     

Convergent flow of ice within the Astrolabe subglacial basin, Trre Adélie, East Antarctica: an hypothesis derived from nummerical modelling experiments

The existence of a large subglacial lake beneath the antarctic Ice Sheet at Terre Adélie indicates the presence of basal ice at its pressure-melting temperature. A numerical model of the ice-sheet thermal regime is employed using the balance velocity of the ice sheet as an initial model input in order to calculate ice-sheet basal temperatures. However, the results from this model show the Terre Adélie area to be characterised by basal freezing. Heat in addition to that accounted for in the model is thus required at the ice-sheet base in order for pressure melting temperatures to be attained. The sources for such heat are (1) an enhanced geothermal heat flux and (2) an increase in frictional heating caused by the flow of ice. In this paper the latter possibility is expanded by hypothesising that subglacial topography induces convergent ice flow around Terre Adélie, causing enhanced basal ice velocities. Model experiments indicate that an increase in ice velocity (from 7 to at least 42 m yr⁻¹) is required to raise the temperature of the basal ice to the pressure melting value. Increased ice velocity, and consequent frictional heat production due to convergent ice flow, may therefore be important in explaining the location of the subglacial lake in this region. These results allow the process of convergent ice flow within a contemporary ice sheet to be quantified. A verification (or otherwise) of the model results may be possible if ice surface velocity measurements from modem GPS methods are made.     

The Zihuatanejo, Mexico, earthquake of 1994 December 10 (M= 6.6): source characteristics and tectonic implications

An analysis of the Zihuatanejo, Mexico, earthquake of 1994 December 10 ( M = 6.6), based on teleseismic and near-source data, shows that it was a normal-faulting, intermediate-depth ( H = 50 ± 5 km) event. It was located about 30 km inland, within the subducted Cocos plate. The preferred fault plane has an azimuth of 130°, a dip of 79° and a rake of −86°. The rupture consisted of two subevents which were separated in time by about 2 s, with the second subevent occurring downdip of the first. The measured stress drop was relatively high, requiring a Δσ of about a kilobar to explain the high-frequency level of the near-source spectra. A rough estimate of the thickness of the seismogenic part of the oceanic lithosphere below Zihuatanejo, based on the depth and the rupture extent of this event, is 40 km.
This event and the Oaxaca earthquake of 1931 January 15 ( M = 7.8) are the two significant normal-faulting, intermediate-depth shocks whose epicentres are closest to the coast. Both of these earthquakes were preceded by several large to great shallow, low-angle thrust earthquakes, occurring updip. The observations in other subduction zones show just the opposite: normal-faulting events precede, not succeed, updip, thrust shocks. Indeed, the thrust events, soon after their occurrence, are expected to cause compression in the slab, thus inhibiting the occurrence of normal-faulting events. To explain the occurrence of the Zihuatanejo earthquake, we note that the Cocos plate, after an initial shallow-angle subduction, unbends and becomes subhorizontal. In the region of the unbending, the bottom of the slab is in horizontal extension. We speculate that the large updip seismic slip during shallow, low-angle thrust events increases the buckling of the slab, resulting in an incremental tensional stress at the bottom of the slab and causing normal-faulting earthquakes. This explanation may also hold for the 1931 Oaxaca event.     

Source investigation of a small event using empirical Green's functions and simulated annealing

We propose a two-step inversion of three-component seismograms that (1) recovers the far-field source time function at each station and (2) estimates the distribution of co-seismic slip on the fault plane for small earthquakes (magnitude 3 to 4). The empirical Green's function (EGF) method consists of finding a small earthquake located near the one we wish to study and then performing a deconvolution to remove the path, site, and instrumental effects from the main-event signal.
The deconvolution between the two earthquakes is an unstable procedure: we have therefore developed a simulated annealing technique to recover a stable and positive source time function (STF) in the time domain at each station with an estimation of uncertainties. Given a good azimuthal coverage, we can obtain information on the directivity effect as well as on the rupture process. We propose an inversion method by simulated annealing using the STF to recover the distribution of slip on the fault plane with a constant rupture-velocity model. This method permits estimation of physical quantities on the fault plane, as well as possible identification of the real fault plane.
We apply this two-step procedure for an event of magnitude 3 recorded in the Gulf of Corinth in August 1991. A nearby event of magnitude 2 provides us with empirical Green's functions for each station. We estimate an active fault area of 0.02 to 0.15 km² and deduce a stress-drop value of 1 to 30 bar and an average slip of 0.1 to 1.6 cm. The selected fault of the main event is in good agreement with the existence of a detachment surface inferred from the tectonics of this half-graben.     

Ccte d'Ivoire-Ghana margin: seismic imaging of passive rifted crust adjacent to a transform continental margin

During May 1990 and January-February 1991, an extensive geophysical data set was collected over the Côte d'Ivoire-Ghana continental margin, located along the equatorial coast of West Africa. The Ghana margin is a transform continental margin running subparallel to the Romanche Fracture Zone and its associated marginal ridge—the Côte d'Ivoire-Ghana Ridge. From this data set, an explosive refraction line running ∼ 150 km, ENE-WSW between 3°55'N, 3°21'W and 4°23'N, 2°4'W, has been modelled together with wide-angle airgun profiles, and seismic reflection and gravity data. This study is centred on the Côte d'Ivoire Basin located just to the north of the Côte d'Ivoire-Ghana Ridge, where bathymetric data suggest that a component of normal rifting occurred, rather than the transform motion observed along the majority of the equatorial West African margin.
Traveltime and amplitude modelling of the ocean-bottom seismometer data shows that the continental Moho beneath the margin rises in an oceanward direction, from ∼ 24 km below sea level to ∼ 17 km. In the centre of the line where the crust thins most rapidly, there exists a region of anomalously high velocity at the base of the crust, reaching some 8 km in thickness. This higher-velocity region is thought to represent an area of localized underplating related to rifting. Modelling of marine gravity data, collected coincident with the seismic line, has been used to test the best-fitting seismic model. This modelling has shown that the observed free-air anomaly is dominated by the effects of crustal thickness, and that a region of higher density is required at the base of the crust to fit the observed data. This higher-density region is consistent in size and location with the high velocities required to fit the seismic data.