Groundwater flow modeling for effective implementation of landslide stability enhancement measures

This paper deals with groundwater hydrology at a prominent fracture zone landslide slope (Nuta–Yone landslides) in Japan with an objective to explore an efficient method for the application of landslide stability enhancement measures. The correlation analyses between the hydrological parameters and ground surface movement data at this landslide resulted in low correlation values indicating that the geological formation of the area is extremely complex. For the purpose of understanding the groundwater flow behavior in the landslide area, a three-dimensional transient groundwater flow model was prepared for a part of the landslide slope, where the levels of effectiveness of applied landslide stability enhancement measures (in the form of multilayered deep horizontal drains) are different, and was calibrated against the measured water surface elevations at different piezometer locations. The parameter distributions in the calibrated model and the general directions of the groundwater flow in terms of flow vectors and the results of particle tracking at the model site were interpreted to understand the reasons for variations in effectiveness of existing landslide stability enhancement measures and to find potentially better locations for the implementation of future landslide stability enhancement measures. From the modeling results, it was also understood that groundwater flow model can be effectively used in better planning and locating the landslide stability enhancement measures.     

An essay on the interactions between climate and society

There has been increasing concern about the lack of involvement by social scientists and humanists in a global change program, although many social scientists are already directly involved in various aspects of research on environmental change, and their research interests are clearly central to a global change research agenda. Based on a historical review, the role of social science disciplines as well as social science institutes in an emerging multidecadal global change program is discussed. Both “plan of action” and “plan of inaction” are suggested to avoid potential pitfalls due to the rush development of a social science program into the existing global climate change problem.     

Application of an environmentally optimum cooling water system design in water and energy conservation

Recirculating cooling water systems are consist of a cooling tower and heat-exchanger network which conventionally have a parallel configuration. However, reuse of water between different cooling duties enables cooling water networks to be designed with series arrangements. This will results in performance improvement and increased cooling tower capacity. Research on recirculating cooling water systems has mostly focused on the individual components. However, a particular design method represented by Kim and Smith accounts for the whole system interactions. In this study, the Kim and Smith design method is expanded and a comprehensive simulation model of recirculating cooling system was developed to account for the interaction between the cooling tower performance and the heat-exchanger network configuration. Regarding this model and considering cycle water quality through introducing ozone treatment technology, a modern methodology of recirculating cooling water system design was established and developed. This technique, called the integrated ozone treatment cooling system design, is a superior designed tool based on pinch analysis and mathematical programing. It also ensures maximum water and energy conservation, minimum cost and environmental impacts. Related coding in MATLAB version 7.3 was used for the illustrative example to get optimal values in cooling water design method computations. The result of the recently introduced design methodology was compared with the Kim and Smith design method.     

Ability of indigenous Bacillus licheniformis and Bacillus subtilis in microbial enhanced oil recovery

Microbially produced lipopeptide have been isolated and studied for microbial enhanced oil recovery. About 60 gram positive bacteria isolated from soil contaminated with crude oil, near the crude oil storage tank in Tehran Refinery, Tehran, Iran. However, most of these studies have produced lipopeptide by one of the pure-culture microbes isolated in a laboratory. Among the isolates, heamolytic tests revealed two biosurfactant producers. The isolated strains were designated as C2, E1. By using morphological, biochemical and molecular biology tests (16 SrRNA), the strains identified as Bacillus licheniformis and Bacillus subtitlis, respectively. Emulsification activity and measurement of surface tension indicated that, the isolates were high producers of biosurfactant. The product of C2 and E1 is mainly lipopeptide. This product reduce surface tension from 65 to 30 mN/m. Emulsified activity of crude oil was 92% for C2 and 90 % in case of E1. This is the first report of indigenous Bacillus licheniformis and Bacillus subtilis from a soil contaminated with oil in an Iranian refinery with ability to produce biosurfactant.     

A combined mathematical geophysical model for prediction of pyrite oxidation and pollutant leaching associated with a coal washing waste dump

The waste produced by coal washing process produces many environmental problems. In this study, the pollution problems associated with the waste produced by Alborz Sharghi Coal Washing Plant was investigated by mathematical modeling. The study area is located at 11 km. to Razmjah coal region and 45 km. to Tehran-Mashhad road in the north part od Iran. To achieve the goal, a few samples were taken from different depths at three points on the waste dump in order to investigate pyrite oxidation and pollution generation. The samples were then analysed, using an AA-670 Shimadzu atomic absorption to determine the fraction of pyrite remained within the waste particles. A numerical finite volume model using Phoenics package has been developed to simulate pyrite oxidation and pollution generation from the Alborz Sharghi coal washing waste dump. The pyrite oxidation reaction is described by the shrinking-core model. Gaseous diffusion is the main mechanism for the transport of oxygen through the waste. The results of numerical modelling were compared with the field observations and close agreement was achieved. A simple mathematical model incorporating advection and hydrodynamic dispersion processes was also presented in order to verify the results of geophysical time-laps method showing transportation of the pollutants through the downstream of the waste dump. Both mathematical model and geophysical time-laps method are agreed in the identification of pollutant transport emanated from the waste dump. The results of such investigations can be used for designing an effective environmental management program.     

On the use of gravity and magnetic anomalies for locating probable areas of metallic mineralization in South Sinai, Egypt

The present study deals with processing and interpreting the potential gravity and magnetic data in order to locate promising sites for metallic mineral occurrences in the basement rocks of South Sinai. Two promising sites were anticipated by combining the geophysical results and the available geological information. Each site was profiled and interpreted to the nearly approximated subsurface feature model, and the geometrical parameters of the expected subsurface structures may form mineralized bodies such as depth, thickness, width, dipping, density contrast, and magnetic susceptibility contrast could be delineated. Detailed ground Very Low Frequency (VLF) and Vertical Magnetic Gradient (VMG) methods were carried out in the site A2, eight VLF and VMG anomalies were determined, and their depths were calculated.     

LREE distribution in perovskite,apatite and titanite from South West Ugandan xenoliths and kamafugite lavas

Summary In-situ microprobe LREE analyses of perovskite and titanite (La, Ce, Nd), and apatite (La, Ce), from SW Ugandan clinopyroxenite xenoliths and kamafugite lavas indicate that LREE distribution in these minerals is determined by a number of factors related to their different parageneses: In particular LREE content is affected by whether the LREE-bearing minerals have crystallised from metasomatic carbonate or from silicate (i.e. metasomatic or magmatic) melts in the mantle. In this situation LREE partition favours carbonate over silicate melts. Distribution of LREE in perovskite and apatite crystallised from magmatic mantle melts or mantle-derived lavas is chiefly determined by preference of LREE for perovskite > apatite > titanite. LREE zoning in perovskite is influenced by changes in melt structure: increasing melt polymerisation enhancing mineral_LREE/melt_LREE partition into perovskite rims in magmatic xenoliths; decreasing melt polymerisation depleting LREE in lava perovskite rims. This zoning is reinforced by perovskite competition with apatite for LREE: perovskite (cores/rims) co-crystallising with apatite is reduced in LREE. There are 37 instances of perovskitewith Ce below detection while La and Nd levels are normal. These occur in both xenoliths and lavas; in grain zones or whole grains. Likewise Ce alone of the LREE is below detection in six out of ten titanite analyses. These observations are interpreted as evidence for increased f_{O 2}, Ce⁴ + being excluded from these mineral structures. Recognition of these various processes can elucidate the interpretation of bulk rock and bulk mineral LREE signatures in kamafugite volcanism.

---

LREE Verteilung in Perovskit, Apatit und Titanit aus Xenolithen und kamafugitischen Laven Südwest-Ugandas

Zusammenfassung In-situ LREE Analysen von Perovskit und Titanit (La, Ce, Nd) und Apatit (La, Ce) aus Klinopyroxenit-Xenolithen und kamafugitischen Laven Südwest-Ugandas zeigen, daß die LREE Verteilung in diesen Mineralen durch eine Vielzahl von Faktoren, die mit Unterschieden in den Paragenesen zusammenhängen, bestimmt wird: Der LREE-Gehalt wird im besonderen davon bestimmt, ob die LREE-führenden Minerale aus metasomatischen Karbonat- oder aus (metasomatischen oder magmatischen) Silikatschmelzen im Mantel auskristallisierten. Dabei erfolgt die LREE Fraktionierung zu Gunsten der Karbonatschmelzen. Die LREE-Verteilung von Perovskit und Apatit, die aus magmatischen Mantelschmelzen oder -laven kristallisierten, wird vorrangig durch den bevorzugten Einbau der LREE in Perovskit > Apatit > Titanit kontrolliert. Der LREE Zonarbau von Perovskit wird durch die Änderungen der Schmelzstruktur beinflußt: Verstärkte Schmelzpolymerisation führt zu verstärkter Mineral_LFEE/Schmelze_LREE Fraktionierung in den Perovskiträndern magmatischer Xenolithe, eine Abnahme der Schmelzpolymerisation hingegen resultiert in einer Abreicherung der LREE in den Perovskiträndern. Diese Art der Zonierung wird durch den Wettbewerb von Perovskit mit Apatit um die LREE verstärkt. Perovskit (Kerne/Ränder), der mit Apatit gemeinsam auskristallisierte, ist ärmer an LREE. 37 Fälle, in denenCe nicht nachweisbar war, La und Nd aber in normaler Konzentration auftreten, wurden sowohl in den Xenolithen als auch in den Laven gefunden; und zwar entweder in Kornbereichen oder in ganzen Körnern. Vergleichsweise liegt Ce nur in sechs von zehn Titanitproben unterhalb der Nachweisgrenze. Diese Beobachtungen werden als Hinweise auf erhöhte SauerstoffFugazitäten, bei denen Ce^4– aus der Mineralstruktur ausgeschlossen wird, angesehen.Ein Verständnis dieser verschiedenen Prozesse kann zur besseren Interpretation von LREE Gesamtgesteins- und Gesamtmineral-Signaturen in Kamafugiten beitragen.

---

---

With 3 Figures     

Transition from eclogite to amphibolite-facies metamorphism in the Austroalpine Ulten Zone

Summary The Ulten Zone of the Austroalpine crystalline basement south-west of Meran (Italy) contains metapelitic schists and granoblastic paragneisses, leucocratic orthogneisses, migmatites (in both gneiss-lithologies), metabasites and ultramafic lenses. Metamorphic textures of the metapelitic schists and granoblastic paragneisses indicate two different metamorphic events, characterized by two mineral assemblages, which differ in mineral chemistry: (1) an eclogite facies mineral assemblage (M1) comprising Grt-Ky I-Bt. Ms-Kfs-PI-Qtz-Rt, and (2) an amphibolite facies mineral assemblage (M2) comprising Grt-KyII-Bt-Ms-PI-Qtz-Ilm±St. For the M1 event, pressures of at least 15kbar and temperatures of about 700°±50°C can be estimated. The later amphibolite facies overprint occurred at pressures of 6 to 8kbar and about 600°±50°C. The M1 and M2 assemblages belong to a continuous clockwise metamorphic evolution during the Variscan orogeny. Evidence for Alpine metamorphism can only be detected by sericite rims around kyanite and reset biotite ages. The migmatites, which contribute about 15–30vol.% of all rocks in the investigated area, were formed on the prograde path during the M1 event. Dissolution of H₂O in the melted part of the migmatites resulted in a CO₂dominated fluid, which was trapped in primary kyanite (M1) fluid inclusions. Secondary H₂O-rich fluid inclusions are found in quartz grains and may represent the fluid which enabled a pervasive equilibration during M2.

---

Übergang von eklogit-zu amphibolitfazieller Matamorphose in der austroalpinen Ultenzone

Zusammenfassung Die Ulten Zone, ein Teil des ostalpinen kristallinen basements, südwestlich von Meran, wird aus Metapeliten and granoblastischen Paragneisen, leukokraten Orthogneisen, Migmatiten (in beiden Lithologien), Metabasiten and ultramafischen Linsen aufgebaut. Metamorphe Texturen der Metapelite und granoblastischen Paragneise lassen auf zwei verschiedene metamorphe Ereignisse schließen, die durch unterschiedliche Mineral-chemismen und Paragenesen charakterisiert sind: (1) eine eklogitfazielle Paragenese (M1), bestehend aus Grt-KyI-Bt-Ms-Kfs-P1-Qtz-Rt und (2) eine amphibolitfazielle Paragenese (M2), bestehend aus Grt-KyII-Bt-Ms-P1-Qtz-Ilm±St. Für M1 konnten Minimaldrucke von 15kbar und Temperaturen von 700°±50°C abgeleitet werden. Die spätere amphibolitfazielle Überprägung fand bei 6 bis 8kbar und 600°±50°C statt. M1 und M2 gehören einer kontinuierlichen Metamorphoseentwicklung während der variszischen Orogenese an.Die Migmatite, ungefähr 15–30vol.% der Gesteine im untersuchten Gebiet, wurden am prograden Pfad während des M1 Ereignisses gebildet. Aufgrund der höheren Löslichkeit von H₂0 in der Schmelze, blieb ein CO₂, reiches Fluid zurück, das im primären Kyanit (M1) eingeschlossen wurde. Wässrige Flüssigkeitseinschlüsse können in Quarzkörnern gefunden werden. Dieses Fluid ist wahrscheinlich für die Reequilibrierung zu amphibolitfaziellen Bedingungen verantwortlich.

---

---

With 5 Figures     

Spatial orientation of the spin vectors of the disk galaxies in the Virgo cluster I. A catalogue of the disk galaxies in the Virgo cluster

Based on four UK Schmidt Telescope (UKST) IIIa-j direct plates which had been digitized by the Automated Plate Measuring System (APM), a detailed identification of the disk galaxies in the Virgo cluster has been carried out. The certain and possible member galaxies are mainly selected from the updated Catalogue of 2096 Galaxies in the Virgo Cluster Area (VCC). The area of this identification covers a 85 square degree region centered on this cluster. As a result, we compiled a new catalogue of 340 certain and possible member disk galaxies, including 85 lenticulars (SO), 136 spirals (S) and 119 irregulars (Irr), where the APM-measured values of the position angle (P.A.) and diameters of 299 disk galaxies are provided. For at least 149 galaxies, the values of the P.A. and diameters are published for the first time.Comparison between the APM-measured P.A. and diameters of galaxies and those given by the Uppsala General Catalog of Galaxies (UGC) demonstrates the reliability of our data. The statistical properties and completeness of this database are also discussed. Compared with the UGC-given P.A. and diameters which were determined by eyes, our data has no selection effect owing to the instrument measurements. Within our searching region, this might be the largest and relatively complete photometric database published so far for investigating the spatial orientation of the spin vectors of galaxies in the Virgo cluster.     

Detection of a new interstellar molecular ion, H2COH+ (protonated formaldehyde)

A new interstellar molecular ion, H2COH+ (protonated formaldehyde), has been detected toward Sgr B2, Orion KL, W51, and possibly in NGC 7538 and DR21(OH). Six transitions were detected in Sgr B2(M). The 1(1,0)-1(0,1) transition was detected in all sources listed above. Searches were also made toward the cold, dark clouds TMC-1 and L134N, Orion (3N, 1E), and a red giant, IRC + 10216, without success. The excitation temperatures of H2COH+ are calculated to be 60-110 K, and the column densities are on the order of 10(12)-10(14) cm-2 in Sgr B2, Orion KL, and W51. The fractional abundance of H2COH+ is on the order of 10(-11) to 10-(9), and the ratio of H2COH+ to H2CO is in the range 0.001-0.5 in these objects. The values in Orion KL seem to be consistent with the "early time" values of recent model calculations by Lee, Bettens, & Herbst, but they appear to be higher than the model values in Sgr B2 and W51 even if we take the large uncertainties of column densities of H2CO into account. We suggest production routes starting from CH3OH may play an important role in the formation of H2COH+.