Impact of Ocean Mean Dynamic Topography on Satellite Data Assimilation

The response of an eddy-permitting ocean model to changes imposed by the use of different mean dynamic topographies (MDT) is analyzed in a multivariate assimilation context, allowing the evaluation of this impact, not only on the surface circulation, but also on the interior ocean representation. The assimilation scheme is a reduced-order sequential Kalman filter (SEEK). In a first set of experiments, high resolution sea surface temperature, along-track sea surface height and sea surface salinity from climatology are assimilated into a 1/3° resolution North and Tropical Atlantic version of the HYCOM model. In a second experiment, in situ profile data are assimilated in addition to the surface measurements.

The first set of experiments illustrates that important differences in the representation of the horizontal model circulation pattern are related to differences in the MDT used. The objective of assimilation is to improve the representation of the 3D ocean state. However, the imperfect representation of the mean dynamic topography appears to be an important limiting factor with regard to the degree of realism obtained in the simulated flow.

Vertical temperature and salinity profiles are key observations to drive a general circulation ocean model toward a more realistic state. The second set of experiments shows that assimilating them in addition to sea surface measurements is a far from trivial exercise. A specific difficulty is due to inconsistencies between the dynamic topography diagnosed from in situ observations and that diagnosed from sea surface height. These two fields obtained from different data sources do not contain exactly the same information. In order to overcome this difficulty, a strategy is proposed and validated.     

Role of Vertical Resolution in Numerical Models Towards the Intensification,Structure and Track of Tropical Cyclones

The impact of vertical resolution on the evolution and movement of tropical cyclones was studied using NCAR MM5 model with a horizontal resolution of 9 km. Four numerical experiments were performed with different vertical resolutions, that is, with 23 vertical levels as control experiment, and 36 vertical levels with high resolution in the lower troposphere, 33 vertical levels with high resolution in the upper troposphere and 46 vertical levels with increased vertical resolution throughout the troposphere as relative to base experiment. The results indicate that increased vertical resolution in the lower troposphere produces efficient intensification and better structure in terms of eye and eyewall. Increased vertical resolution at lower levels improves the prediction of vertical shear of horizontal wind. Experiments with high resolution in the lower troposphere and high resolution throughout the troposphere simulate better track up to 72 hours.     

On the Conversion of Antarctic Ice-Mass Change to Sea Level Equivalent

This technical note aims to provide a quick reference and some computational examples for the conversion between Antarctic ice-mass changes and global sea level equivalent (SLE) changes using a few assumptions that computationally simplify this complex problem and that acknowledge gaps in our knowledge of the Antarctic environment. A number of factors involved in the conversion process are discussed, and the sensitivity of the conversion result to certain aspects is analyzed. It was found that the global ocean area calculated from a recently improved global shoreline dataset has little impact on the uncertainty of the SLE estimation. SLE estimation using satellite gravity observations, such as those by GRACE, are sensitive to glacial isostatic adjustment (GIA) models. One more important result from the computation is that the effective density of the volume that is gained or lost during mass change may greatly affect the outcome of the conversion if it differs greatly from the actual density of the firn/ice layers. Finally, a table of computational examples is provided for reference under some assumptions for simplifying the computation.     

Ferromanganese Nodules and Crusts from the Christmas Island Region,Indian Ocean

A sampling expedition has shown that largely hydrogenetic marine ferromanganese deposits occur in the Christmas Island region south of Java (~10°S), as small nodules on seamount slopes and abyssal plains (red clay), and as thick crusts on volcanic ridges and seamounts. Vernadite is dominant, with birnessite, jacobsite and todorokite common. Nodules were recovered in 25% of free-fall grab stations in water 4600-5900 m deep, and are not abundant where present. The nodules average 9.6% Fe, 19.7% Mn, 0.51% Ni, 0.49% Cu, and 0.12% Co. Crusts are common in water 1450-3700 m deep, with average deposition rates of 1-1.5 mm / m.y. The crusts average 13.9% Fe, 16.2% Mn, 0.35% Ni, 0.11% Cu, and 0.44% Co. Cobalt grades are higher (~0.8%) in shallower water ( < 2500 m), so future exploration should concentrate on depths of 500-1500 m near the oxygen minimum zone.     

Cement Deep Soil Mixing (CDSM) for Solidification of Soft Estuarine Sediments

A preliminary study was conducted to determine the potential for cement deep soil mixing (CDSM) technology as a method for in-situ solidification of contaminated river and estuarine sediments. The study was conducted in Newark Bay, near the mouth of the Passaic River, New Jersey. The primary objective of the study was to evaluate the viability of CDSM for the in-situ S/S with a focus on: 1) determining the correct mix of the cement slurry, which provides rapid stabilization of the sediment matrix, 2) potential resuspension of solids during CSDM operations, 3) the effects of high organic content on the solidification process, and 4) the feasibility of using conventional dredging/extraction methods once the sediments have been stabilized and allowed to cure. The results of the study show CDSM slurry mixtures, as low as 7% in cement content, result in significant solidification and strength gain of in-situ sediments under ambient conditions. In sediments with very high organic contents (> 20%), the slurry mix would need to be adjusted to account for retardation effects of organics on cement hydration. Sediment resuspension during application was shown to be minimal at a distance of as little as 75 feet from the mixing head. Strength gains were considerable, effectively consolidating the sediment particles in a secure matrix, but not so high as to preclude extraction of solidified sediments with conventional dredging equipment. Dredged solidified sediment exhibited characteristics of a stiff glacial clay, and as such was easier to handle and transport than untreated dredged sediments. This technique has high potential to be used as an interim remedial measure prior to either extraction and decontamination/disposal or proper capping.     

Probabilistic analysis for wave‐induced submarine landslides

Abstract

When waves propagate over the ocean floor, they induce a change of hydrodynamic pressure, positive under the crest and negative under the trough. These pressure changes may cause shear failure in soft sediments and lead to submarine landslides. This paper presents a general analytical procedure for evaluating the probability of wave‐induced failure in offshore clay sediments. Both the wave and the un‐drained shear strength of clay sediments are considered random. Numerical results of some analyses are also presented.     

利用卫星遥感资料估算海面太阳辐照度的初步结果

本文在分析了若干由卫星信息提取地表的太阳辐照度物理模式的基础上,将１９９５年５月２６日的ＮＯＡＡ卫星ＡＶＨＲＲ资料经适当变换后,选用Ｈａｙ和Ｈａｎｓｏｎ模式估算并分析了黄渤海３５°～４０°Ｎ、１２０°～１２５°Ｅ海区的海面太阳辐照度值。文中指出,卫星测量可成为海面太阳辐照度观测的有效手段。建议：１）尽快在国内开展这方面的研究;２）应进行海洋实况测量（最好是卫星过境时同步进行）;３）建立从卫星资料提取我国海区海面辐照度的适用算法。     

水深对超浅吃水拖轮系柱拖力的影响

超浅吃水拖轮在浅海对钻井平台进行拖带和井位定位时,必须了解超浅吃水拖轮浅水系柱拖力特性,才能充分利用海潮条件和自身能力完成钻井平台的拖带和定位任务。     

海洋沉积物中烃类化合物预处理条件优化及应用

运用分辨率高、稳定性好的ＨＰ６８９０ 毛细管气相色谱仪定性、定量测定海洋沉积物中的正构烷烃和多环芳烃。对沉积物样品的预处理中抽提、蒸发、柱层析、萃取等步骤条件进行优化。优化方法中,正构烷烃系列化合物回收率为６５ ％ ～７６ ％ ,多环芳烃系列化合物为８８ ％ ～９５％ ,标准偏差是２．７％ ～２０．２％ （ｎ＝ ３）