Stability and phase relations of nonstoichiometric clinopyroxenes in the join diopside-Ca-Eskola component at high pressures

The stability of nonstoichiometric clinopyroxenes in the Di-CaEsk join was experimentally studied, and phase diagrams were constructed for this join at pressures of 2.0 and 3.0 GPa. It was found that melting in the diopside part of the join occurs at anomalously low temperatures, and nonstoichiometric clinopyroxene coexists with a phase approaching diopside in composition. Phase relations along the Di-CaEsk join can be described and consistently interpreted only assuming that the diopside phase (α-diopside) is thermodynamically stable. The following phase volumes were observed along the solidus of the join at a pressure of 3.0 GPa: Cpx, αDi+Cpx, αDi+Cpx+Qtz, αDi+Cpx+Grt+Qtz, Cpx+Grt+Qtz, Cpx+Grt+Ky+Qtz, Grt+Ky+Qtz. Melting occurs via the eutectic reaction αDi+Cpx+Grt+Qtz=L at a temperature of about 1200°C in the diopside part of the system and via the eutectic reaction Cpx+Grt+Ky+Qtz=L at a temperature of 1400°C in the calcium-rich part of the system. At a pressure of 2.0 GPa, melting occurs at temperatures of 1200–1300°C via the eutectic reaction αDi+Cpx+ An + Qtz=L. The invariant equilibrium (L, An, Cpx, Grt, αDi, Qtz) lies within the pressure range 2.0–3.0 GPa. Nonstoichiometric clinopyroxenes form complex solid solutions, the compositions of which are not strictly confined to the Di-CaEsk join and depend on temperature, pressure, and phase association. Grossular garnets coexist with nonstoichiometric clinopyroxenes and α-diopside.     

The effect of horizontal resolution on simulation of very extreme US precipitation events in a global atmosphere model

We investigate the ability of a global atmospheric general circulation model (AGCM) to reproduce observed 20 year return values of the annual maximum daily precipitation totals over the continental United States as a function of horizontal resolution. We find that at the high resolutions enabled by contemporary supercomputers, the AGCM can produce values of comparable magnitude to high quality observations. However, at the resolutions typical of the coupled general circulation models used in the Fourth Assessment Report of the Intergovernmental Panel on Climate Change, the precipitation return values are severely underestimated.     

Centrifuge model test of an irrigation-induced loess landslide in the Heifangtai loess platform,Northwest China

The Heifangtai platform in Northwest China is famous for irrigation-induced loess landslides. This study conducted a centrifuge model test with reference to an irrigation-induced loess landslide that occurred in Heifangtai in 2011. The loess slope model was constructed by whittling a cubic loess block obtaining from the landslide site. The irrigation water was simulated by applying continuous infiltration from back of the slope. The deformation, earth pressure, and pore pressure were investigated during test by a series of transducers. For this particular study, the results showed that the failure processes were characterized by retrogressive landslides and cracks. The time dependent reductions of cohesion and internal friction angle at basal layer with increasing pore-water pressure were responsible for these failures. The foot part of slope is very important for slope instability and hazard prevention in the study area, where concentration of earth pressure and generation of high pore-water pressures would form before failures. The measurements of earth pressure and pore-water pressure might be effective for early warning in the study area.     

Stable carbon isotope ratios in lake and swamp sediments as a proxy for prehistoric forest clearance and crop cultivation in the Neotropics

Close correspondence between stable carbon isotope ratios ( ¹³ C), pollen, and charcoal profiles in sediment cores from Laguna Zoncho and Machita swamp, Costa Rica, shows that prehistoric forest clearance and crop cultivation can be detected in the stable carbon isotope ratios of total organic carbon ( ¹3C _TOC ). Analyses of δ 13C _TOC complement evidence from pollen, charcoal, and phytoliths and provide a proxy that is sensitive to the intensity and/or proximity to core sites of prehistoric forest clearance and agriculture in watersheds. Stable carbon isotope analyses are particularly useful in situations in which other evidence of forest clearance and agriculture is limited.     

FORWARD MODELING IN THE FREQUENCY-SPACE DOMAIN*

Forward modeling of zero-offset data is performed in the frequency-space domain using a one-way extrapolation equation. The use of the frequency domain offers several advantages over conventional time domain methods. The greatest advantage of the frequency domain is that all time derivatives are evaluated exactly by a simple multiplication. Synthetic zero-offset sections are computed with a high degree of accuracy for arbitrary velocity and reflectivity structures. Examples are shown for realistic complicated models and compared with results from physical modeling.     

Non-linear fluid dynamics of eccentric discs

A new theory of eccentric accretion discs is presented. Starting from the basic fluid-dynamical equations in three dimensions, I derive the fundamental set of one-dimensional equations that describe how the mass, angular momentum and eccentricity vector of a thin disc evolve as a result of internal stresses and external forcing. The analysis is asymptotically exact in the limit of a thin disc, and allows for slowly varying eccentricities of arbitrary magnitude. The theory is worked out in detail for a Maxwellian viscoelastic model of the turbulent stress in an accretion disc. This generalizes the conventional alpha viscosity model to account for the non-zero relaxation time of the turbulence, and is physically motivated by a consideration of the nature of magnetohydrodynamic turbulence. It is confirmed that circular discs are typically viscously unstable to eccentric perturbations, as found by Lyubarskij, Postnov & Prokhorov, if the conventional alpha viscosity model is adopted. However, the instability can usually be suppressed by introducing a sufficient relaxation time and/or bulk viscosity. It is then shown that an initially uniformly eccentric disc does not retain its eccentricity as had been suggested by previous analyses. The evolutionary equations should be useful in many applications, including understanding the origin of planetary eccentricities and testing theories of quasi-periodic oscillations in X-ray binaries.     

Bristen granite: a highly differentiated,fluorite-bearing A-type granite from the Aar massif,Central Alps,Switzerland

Bristen granite is a body of fine-grained leucogranite occurring in the Gotthard rail base tunnel in the Central Alps. During construction of the tunnel, Bristen granite (Brgr) has been drilled along a 600 m long section. The aplite-granite belongs to the suite of Variscan granitoid intrusions of the Aar massif and contains a variety of accessory minerals typical of highly differentiated granites. Rock forming fluorite, partly enriched in yttrium (Y) and rare earth elements (REE), is intergrown with the late Y- and REE-bearing carbonate mineral synchysite. The granite contains a variety of Ti- and Y-REE-niobates, thorite, and zircon. Compared with the calc-alkaline central Aar granite (cAgr), Bristen granite is strongly depleted in Ti, P, Mg, Sr, and Ba and shows a remarkable enrichment in incompatible elements such as Rb, Th, U, Nb, Y, HREE and F. Bristen granite is the most evolved granitoid rock of the Aar massif. The composition of Brgr is typical of post-collisional reduced (ferroan) A-type granites. The Brgr melt formed in the lower crust and crystallized from a highly differentiated melt at the cotectic point in the quartz-feldspar system close to 100 MPa and 700 °C. The Brgr intruded as a small isolated stock pre-Variscan gneisses with sharply discordant contacts. The primary igneous host of Nb, Ta, Y, U, Th and REE is biotite in addition to minor amounts of allanite, and zircon. The presence of Y-REE-fluorite, synchysite, parisite and Y- and Ti-niobates and other REE-minerals can be related to reaction of igneous biotite and primary fluorite with hydrothermal fluids. The reaction is associated with alpine metamorphism, because Y-bearing fluorite and synchysite have been reported from Alpine fissures. The transformation of primary biotite to chlorite and muscovite released the heavy metal oxides under lower greenschist facies conditions that formed the Alpine diagnostic mineral stilpnomelane at about 300 °C.     

The Proterozoic,albitite-hosted,Valhalla uranium deposit,Queensland, Australia: a description of the alteration assemblage associated with uranium mineralisation in diamond drill hole V39

The Valhalla uranium deposit, located 40 km north of Mount Isa, Queensland, Australia, is an albitite-hosted, Mesoproterozoic U deposit similar to albitite-hosted uranium deposits in the Ukraine, Sweden, Brazil and Guyana. Uranium mineralisation is hosted by a thick package of interbedded fine-grained sandstones, arkoses and gritty siltstones that are bound by metabasalts belonging to the ca. 1,780 Ma Eastern Creek Volcanics in the Western Succession of the Mount Isa basin. Alteration associated with U mineralisation can be divided into an early, main and late stage. The early stage is dominated by laminated and intensely altered rock comprising albite, reibeckite, calcite, (titano)magnetite ± brannerite. The main stage of mineralisation is dominated by brecciated and intensely altered rocks that comprise laminated and intensely altered rock cemented by brannerite, apatite, (uranoan)-zircon, uraninite, anatase, albite, reibeckite, calcite and hematite. The late stage of mineralisation comprises uraninite, red hematite, dolomite, calcite, chlorite, quartz and Pb-, Fe-, Cu-sulfides. Brannerite has U–Pb and Pb–Pb ages that indicate formation between 1,555 and 1,510 Ma, with significant Pb loss evident at ca. 1,200 Ma, coincident with the assemblage of Rodinia. The oldest ages of the brannerite overlap with ⁴⁰Ar/³⁹Ar ages of 1,533 ± 9 Ma and 1,551 ± 7 Ma from early and main-stage reibeckite and are interpreted to represent the timing of formation of the deposit. These ages coincide with the timing of peak metamorphism in the Mount Isa area during the Isan Orogeny. Lithogeochemical assessment of whole rock data that includes mineralised and unmineralised samples from the greater Mount Isa district reveals that mineralisation involved the removal of K, Ba and Si and the addition of Na, Ca, U, V, Zr, P, Sr, F and Y. U/Th ratios indicate that the ore-forming fluid was oxidised, whereas the crystal chemistry of apatite and reibeckite within the ore zone suggests that F⁻ and were important ore-transporting complexes. δ¹⁸O values of co-existing calcite and reibeckite indicate that mineralisation occurred between 340 and 380°C and involved a fluid having δ¹⁸O_fluid values between 6.5 and 8.6‰. Reibeckite δD values reveal that the ore fluid had a δD_fluid value between −98 and −54‰. The mineral assemblages associated with early and main stages of alteration, plus δ¹⁸O_fluid and δD_fluid values, and timing of the U mineralisation are all very similar to those associated with Na–Ca alteration in the Eastern Succession of the Mount Isa basin, where a magmatic fluid is favoured for this style of alteration. However, isotopic data from Valhalla is also consistent with that from the nearby Mount Isa Cu deposit where a basinal brine is proposed for the transport of metals to the deposit. Based on the evidence to hand, the source fluids could have been derived from either or both the metasediments that underlie the Eastern Creek Volcanics or magmatism that is manifest in the Mount Isa area as small pegmatite dykes that intruded during the Isan Orogeny.     

The influence of volcanism on paleoclimate in the northeast of China： Insights from Jinchuan peat, Jilin Province, China

Just like contemporary sediments, peat itself is a good repository of information about climate change, the effects of volcanic activity on climate change have been truly recorded in peat, since it is a major archive of volcanic eruption incidents. A section of sand was identified as tephra from the Jinchuan peat, Jilin Province, China, for the grains look like slag with surface bubbles and pits, characterized by high porosity, and loose structure with irregular edges and corners. According to the peat characteristics of uniform deposition, the tephra was dated at 2002–1976 a B.P. by way of linear interpolation, so the time of volcanic eruption was 15 B.C.–26 A.D. (the calibrated age). While the geochemical characteristics of tephra in this study are quite the same as those of tephra from the Jinlongdingzi volcano at Longgang and from alkaline basaltic magma, with the contents of SiO₂<55%, and the similar contents to Al₂O₃ and Fe, but the contents of Na₂O>K₂O. We speculated that the tephra in this study came from the Longgang volcano group. Compared with 11 recorded volcanic eruption events as shown on the carbon and oxygen isotope curves of the Jinchuan peat cellulose, it is obviously seen that adjacent or large-scale volcanic eruptions are precisely corresponding to the minimum temperature and humidity. It seems that these volcanic eruptions indeed affected the local climate, leading to the drop of regional temperature and humidity. As a result, there was prevailing a cold and dry climate there, and all these changes can be well recorded in peat. So the comparison of volcanic eruption events with information about climate change developed from peat, can provide strong evidence for the impact of volcanism on climate change.     

3D behaviour of contamination in landfill sites using 2D resistivity/IP imaging: case studies in Portugal

Aiming at defining a valid spatial contamination model, resistivity and induced polarization (IP) measurements were used to investigate contamination plumes in the vicinity of two municipal landfills (Ovar and ílhavo). Previous geophysical surveys and underground water samples confirmed the contamination. However 2D resistivity/IP surveys enabled in obtaining a more accurate spatial model. The Ovar survey consisted of two profiles with nine Wenner soundings each; the ílhavo survey was carried out along two individual lines using a Wenner standard pseudo-section. In both situations, negative IP values were found associated with positive IP values, which can be explained mainly by 2D or 3D geometric effects caused by the presence of the conductive plumes. The data were modelled using a 2D inversion program (RES2DINV) and the resulting resistivity and chargeability distributions were displayed as pseudo-sections. The resistivity and chargeability pseudo-sections define the contamination plumes and the sedimentary structure. These case studies illustrate the advantages of 2D resistivity/IP surveys for the mapping of shape and dimension of contamination associated with landfills.