Tourism research in the United States: a geographic perspective

The nature of tourism geography research in the United States is characterized by seven factors. First, research is not concentrated on a few topics of interest but rather is very diverse. Second, there is no research paradigm to influence the direction of investigations. Third, examination of tourism tends to stress the unique case rather than the general situation. Fourth, studies that replicate and/or verify original findings are not common. Fifth, the complexity of the tourism experience and the lack of data bases partially explain ideographic tendencies. Sixth, efforts to produce an understanding of the spatial aspects of tourism are primarily conducted by individuals and small groups. Seventh, emphasis is placed on domestic rather than international tourism. In conclusion, four future trends are noted. One, research that has been expanding rapidly will continue to increase but at a slower rate. Two, improved technology and methods of collecting information will make available large data sets for the assessment of tourism trends at international, national, regional, and state levels. Three, increased needs for useful research findings will result in more theoretical and applied investigations. Four, tourism geographers will engage in increased amounts of interdisciplinary research and begin to associate more and more with other social scientists in the examination of tourism.     

Dynamic recrystallization and fabric development during the simple shear deformation of ice

In situ observations of polycrystalline ice deformed in simple shear between −10 and −1°C are presented. This study illustrates the processes responsible for the deformation, the development of a preferred crystallographic orientation and the formation of a preferred dimensional orientation. Intracrystalline glide on the basal plane, accompanying grain rotations and dynamic recrystallization, helps to accommodate the large intragranular strains. These are the most important mechanisms for crystallographic reorientation and produce a stable fabric that favours glide on the basal plane. Localized kinks, developed in grains unfavourably oriented for easy glide, are unstable and are overprinted by dynamic recrystallization. Dynamic recrystallization is a strain softening process with nucleation occurring in the form of equiaxed grains that grow subparallel to pre-existing grain anisotropies and become elongate during deformation. Plots of grain axial ratio against orientation ( ) indicate a weak shape fabric which does not correspond to the theoretical foliation and elongation for the appropriate increment of shear strain. We argue that estimates of the strain magnitude made from orientation of elongate grains are unreliable in high temperature shear zones. These results are applicable to both geological and glacial shear environments.     

A paleomagnetic and isotopic age for the Wackerfield Dyke of northern England

The Wackerfield Dyke is exposed in northern England and its field relationships suggest it could be related to the Eocene Mull Dyke Swarm. Wackerfield Dyke specimens taken from below the zone of surface weathering have a natural remanent magnetization that is extremely stable to thermal and alternating field demagnetization. Stability is expected because the Fe-Ti oxides are highly oxidized. The stable magnetization is identical with a primary remanence that can be isolated from certain samples of the Whin Sill of northern England, and gives a mean pole at 175°E, 22°N (dp = 2°, dm = 3°). An Upper Carboniferous age for the Wackerfield Dyke is confirmed by a K-Ar whole rock age of 303 my.     

The isotopic composition of strontium in some South African kimberlites

Strontium isotopic studies of kimberlites reveal no significant differences between the respective whole-rock Sr⁸⁷/Sr⁸⁶ ratios of fissure and pipe kimberlites. Kimberlites from the Swartruggens fissure (calcareous micaceous kimberlite) have Sr⁸⁷/Sr⁸⁶ ratios of from 0.709 to 0.716, whilst those from the Wesselton pipe have Sr⁸⁷/Sr⁸⁶ ratios of from 0.708 to 0.715. Other kimberlites range from 0.706 to 0.715. Samples are considered to be late Cretaceous to early Tertiary and thus the ratios are approximately initial ratios. The Sr⁸⁷/Sr⁸⁶ ratios bear no relation to the Rb or Sr content of individual kimberlite bodies. The high initial ratios are not due to bulk assimilation of granitic material in either a kimberlite or carbonatitic magma. Rb-Sr data for garnet peridotites and eclogite xenoliths in kimberlite are not compatible with production of kimberlite by eclogite fractionation from a melt derived from garnet lherzolite. The Sr isotopic composition of kimberlite is compatible with partial melting of garnet mica peridotite. The isotopic composition of liquids formed by partial melting of this rock can be modified by (i) gross contamination with material of low Sr⁸⁷/Sr⁸⁶ ratio or (ii) selective diffusion of material of high Sr⁸⁷/Sr⁸⁶ ratio into kimberlitic fluids.     

Synthetic seismogram and surface wave constraints on crustal models of Spitsbergen

Seismic refraction data collected on Spitsbergen in 1978 are used to obtain a crustal model assuming plane horizontal layering. The observed travel-times and wave forms are compared with those of synthetic seismograms computed for various published crustal models. The more detailed models adequately explain some, but not all, of the features of the synthetics. These models are adjusted, utilizing travel times and wave-form amplitudes until a satisfactory fit is achieved. The best-fitting model consists of a 4-layer crust having thicknesses of 4.1, 10.0 7.4 and 5.8 km and compressional velocities of 4.65, 6.21, 6.30 and 6.65 km/sec with increasing depth. The uppermost mantle has a velocity of 7.90 km/sec. A comparison of observed and synthetic P_n waveforms supports the existence of a thin low-velocity zone beginning at a depth of about 5 km beneath the Moho boundary. An inversion of seismic surface wave group velocity data yields a shear-wave model which is compatible with the compressional wave model.     

Complete remagnetization of some Permian dykes from western Norway induced during burial/uplift

Stable paleomagnetic directions in four basaltic dykes and in some associated Caledonian metamorphic rocks define high-latitude, Mesozoic paleomagnetic pole positions which are not compatible with the K---Ar age of 250 My determined for the dykes. A monotonic increase of 40% occurs in the potassium content of samples taken across a dyke 32 cm wide. This is accompanied by only a 1–2% variation in the K---Ar age of the samples, suggesting the absence of any significant level of initial argon. Titanomagnetite grains having bulk compositions around x = 0.6 have suffered extensive low-temperature alteration, forming assemblages of ferri-rutile granules in a matrix of pure magnetite. The complete remagnetisation of both the dykes and the associated country rocks is probably an expression of a VRM acquired at elevated temperatures (150–500°C) at the emplacement depth of the dykes. A stable remanent magnetisation was locked-in during uplift of the area, probably related to the Kimmerian basin development in the adjacent North Sea and the epeirogenic uplift of western Fennoscandia.     

Abundance and distribution of gold,palladium and iridium in some spinel and garnet lherzolites: implications for the nature and origin of precious metal-rich intergranular components in the upper mantle

The abundance and distribution of Au, Pd, Ir, Cu, Co and Cr has been determined in mantle-derived spinel lherzolite xenoliths in basanites from Mt Porndon (Victoria, Australia) and Kilbourne Hole (New Mexico, U.S.A.) and in garnet lherzolites from the Matsoku and Thaba Putsoa kimberlites (Lesotho). Minerals in the lherzolites concentrate Au, Pd and Ir in the following sequence of increasing platinum group element (PGE) content; garnet, olivine, orthopyroxene, clinopyroxene, spinel. and demonstrate that there exists a real crystallochemical control on the distribution of PGE. Whole rock PGE abundances calculated from the modal mineralogy are less than actually determined and indicate that the bulk of the PGE (60–80%) occur in a sulphide-rich intergranular component. A metasomatic origin for this component is considered to be unlikely and it is proposed that it represents an immiscible sulphide melt which has been retained in the mantle after extraction of a sulphur saturated basic partial melt. This component may in the case of garnet lherzolites have been modified by metasomatic events in the mantle leading to Au depletion and rare earth element addition. Spinel lherzolites are relatively homogeneous at a given locality but differ in their PGE content regionally. The weighted average abundances of PGE in a spinel lherzolite upper mantle are 0.6 ppb. Au, 4.0 ppb Pd. 3.6 ppb Ir. Garnet lherzolites are very heterogeneous and insufficient data is available to allow calculation of geochemically meaningful averages. Spinel lherzolite-basalt based pyrolite contains 0.9 ppb Au, 4.3 ppb Pd, 3.0 ppb Ir, and indicates that the mantle contains an apparent excess of Au over a calculated abundance based upon the siderophilic equilibrium distribution of Au between core and mantle. This excess is considered to be due to failure to consider the chalcophilic nature of Au in the mantle and not to the addition of a meteoritic component to a mantle equilibrated with the core.     

Evaluating Cenozoic equatorial sediment deposition anomalies for potential paleoceanographic and Pacific plate motion applications

If equatorial sediments form characteristic deposits around the equator, they may help to resolve the amount of northwards drift of the Pacific tectonic plate. Relevant to this issue, it has been shown that ²³⁰Th has been accumulating on the equatorial seabed faster than its production from radioactive decay in the overlying water column during the Holocene (Marcantonio et al. in Paleoceanography 16:260–267, 2001). Some researchers have argued that this reflects the deposition of particles with adsorbed ²³⁰Th carried by bottom currents towards the equator (“focusing”). If correct, this effect may combine with high pelagic productivity, which is also centered on the equator, to yield a characteristic signature of high accumulation rates marking the paleoequator in older deposits. Here we evaluate potential evidence that such an equatorial feature existed in the geological past. Seismic reflection data from seven meridional transects suggest that a band of equatorially enhanced accumulation of restricted latitude was variably developed, both spatially and temporally. It is absent in the interval 14.25–20.1 Ma but is well developed for the interval 8.55–14.25 Ma. We also examined eolian dust accumulation rate histories generated from scientific drilling data. A dust accumulation rate anomaly near the modern equator, which is not obviously related to the inter-tropical convergence zone, is interpreted as caused by focusing. Accumulation rates of Ba and P₂O₅ (proxies of export production) reveal a static equatorial signature, which suggests that the movement of the Pacific plate over the period 10–25 Ma was modest. The general transition from missing to well-developed focusing signatures around 14.25 Ma in the seismic data coincides with the mid-Miocene development of the western boundary current off New Zealand. This current supplies the Pacific with deep water from Antarctica, and could therefore imply a potential paleoceanographic or paleoclimatic origin. At 10.05–14.25 Ma, the latitudes of the seismic anomalies are up to ~2° different from the paleoequator predicted by Pacific plate-hotspot models, suggesting potentially a small change in the hotspot latitudes relative to the present day (although this inference depends on the precise form of the deposition around the equator). The Ba and P₂O₅ anomalies, on the other hand, are broadly compatible with plate models predicting slow northward plate movement over 10–25 Ma.     

Sub-Micrometre Resolution FIB-SEM-based ToF-SIMS Used to Map Geochemical Zoning in Four Zircon Reference Materials

Zircon geochemistry can vary over micrometre scales; therefore, natural reference materials need to be well characterised before being used to calculate trace element mass fractions in unmeasured samples. Moreover, reference material homogeneity needs to be ensured with the accelerating rate of geoanalytical developments to map mineral chemistry at increasingly finer scales. Here, we investigate trace element zoning in four widely used zircon reference materials: 91500, Mud Tank, Temora and Plešovice, as well as zircon crystals from the Mount Dromedary/Gulaga Igneous Complex, Australia. Sub-micrometre resolution focused ion beam scanning electron microscope (FIB-SEM) based time-of-flight secondary ion mass spectrometry (ToF-SIMS) and 5 μm resolution LA-ICP-MS mapping show that trace elements are zoned in all reference materials, though 91500 exhibited the least zonation. We demonstrate that FIB-SEM-based ToF-SIMS can rapidly resolve variations in trace elements (e.g., U, Th, Sc, Y, Gd, Dy, Yb and Li) at sensitivities down to the μg g^-1 level with a spatial resolution of 195 nm for areas 100 × 85 μm to 959 × 828 μm. Zircon 91500 is recommended for future quantitative analyses provided that (1) the spatial distribution of elements is imaged before analysis of unknown samples and (2) it is used in conjunction with a doped glass as the primary reference material.