Submarine Sand Resources, Southeastern Virginia-Contributions from Year 9 and Year 10 of Virginia's Continental Margins Program

Virginia's year 9 and year 10 funds from the Continental Shelf Program were used to supplement other work funded by the Minerals Management Service in an ongoing Cooperative Agreement focused on the area offshore of southeastern Virginia. Year 9 and year 10 funds facilitated interpretation of subbottom profiles and the analysis of sediment samples from cores and grabs. On Virginia's sediment-starved continental shelf, deposits of material potentially suitable for use as beach nourishment or, perhaps, as construction aggregate occur in three stratigraphic settings, each with specific characteristics of morphology, grain-size gradients, likelihood of discovery, and physical ease of exploitation. All must be verified with a careful program of coring. Modern shoals generally are easier to identify, prove, and access than either filled channels or lenticular facies. Shoals usually are identifiable on nautical charts and characteristically have a definite lower boundarythat can be seen in subbottom profiles. In most cases, the base of the shoal coincides with the level of the surrounding sea floor. Filled channels are readily identifiable on subbottom profiles but may have a narrow, sinuous form and steep lateral gradients in sediment properties. Buried lenticular facies of good-quality sand usually are found only fortuitously. As the lateral and often vertical gradients in geotechnical properties usually are low, the lenticular facies can be mined with a lesser concern for the consequences of violating the deposit's limits than with the other two types of deposit. There are three types of filled paleochannels in the study area. (1) Relatively near-surface, generally small, roughly shore normal channels most likely mark the migration of tidal inlets across the shelf during the most recent transgression. (2) Small, relatively wide and relatively shallow generally shore parallel channels may be filled back-barrier or lagoonal channels. (3) Larger channels trending across the shelf probably result from riverine flow. The complexity of the seismostratigraphy of the Quaternary deposits on south eastern Virginia's inner continental shelf is a result of series of high-frequency (fifth-order, 10-20,000 y), low-amplitude (20-30 m) variations in sea level that occurred during the last highstand, roughly 80,000 to 130,000 BP. The evidence of the small oscillations in sea level is best seen in the regions that were between the shoreline and wave base, today's inner shelf; however, the very low rates of deposition on the shelf make it difficult to correlate specific reflectors or beds or, at times, to distinguish between fifth-and fourth-order changes. Results for the continuing studies already have been used in the determination to mine several hundred thousand cubic meters of sand from Sandbridge Shoal for use on a Navy-owned facility and in consideration of mining greater quantities of sand from Sandbridge and other shoals for use in local beach nourishment and hurricane protection efforts.     

High-resolution P-Cable 3D seismic imaging of gas chimney structures in gas hydrated sediments of an Arctic sediment drift

The newly developed P-Cable 3D seismic system allows for high-resolution seismic imaging to characterize upper geosphere geological features focusing on geofluid expressions (gas chimneys), shallow gas and gas hydrate reservoirs. Seismic imaging of a geofluid system of an Arctic sediment drift at the Vestnesa Ridge, offshore western Svalbard, provides significantly improved details of internal chimney structures from the seafloor to ∼500 m bsf (below seafloor). The chimneys connect to pockmarks at the seafloor and indicate focused fluid flow through gas hydrated sediments. The pockmarks are not buried and align at the ridge-crest pointing to recent, topography-controlled fluid discharge. Chimneys are fuelled by sources beneath the base of gas hydrate stability zone (GHSZ) that is evident at ∼160–170 m bsf as indicated by a bottom-simulating reflector (BSR). Conduit centres that are not vertically straight but shift laterally by up to 200 m as well as discontinuous internal chimney reflections indicate heterogeneous hydraulic fracturing of the sediments. Episodically active, pressure-driven focused fluid flow could explain the hydro-fracturing processes that control the plumbing system and lead to extensive pockmark formation at crest of the Vestnesa Ridge. High-amplitude anomalies in the upper 50 m of the chimney structures suggest formations of near-surface gas hydrates and/or authigenic carbonate precipitation. Acoustic anomalies, expressed as high amplitudes and amplitude blanking, are irregularly distributed throughout the deeper parts of the chimneys and provide evidence for the variability of hydrate and/or carbonate formation in space and time.     

Upward continuation of Dome-C airborne gravity and comparison with GOCE gradients at orbit altitude in east Antarctica

An airborne gravity campaign was carried out at the Dome-C survey area in East Antarctica between the 17th and 22nd of January 2013, in order to provide data for an experiment to validate GOCE satellite gravity gradients. After typical filtering for airborne gravity data, the cross-over error statistics for the few crossing points are 11.3 mGal root mean square (rms) error, corresponding to an rms line error of 8.0 mGal. This number is relatively large due to the rough flight conditions, short lines and field handling procedures used. Comparison of the airborne gravity data with GOCE RL4 spherical harmonic models confirmed the quality of the airborne data and that they contain more high-frequency signal than the global models. First, the airborne gravity data were upward continued to GOCE altitude to predict gravity gradients in the local North-East-Up reference frame. In this step, the least squares collocation using the ITGGRACE2010S field to degree and order 90 as reference field, which is subtracted from both the airborne gravity and GOCE gravity gradients, was applied. Then, the predicted gradients were rotated to the gradiometer reference frame using level 1 attitude quaternion data. The validation with the airborne gravity data was limited to the accurate gradient anomalies (T_XX, T_YY, T_ZZ and T_XZ) where the long-wavelength information of the GOCE gradients has been replaced with GOCO03s signal to avoid contamination with GOCE gradient errors at these wavelengths. The comparison shows standard deviations between the predicted and GOCE gradient anomalies T_XX, T_YY, T_ZZ and T_XZ of 9.9, 11.5, 11.6 and 10.4 mE, respectively. A more precise airborne gravity survey of the southern polar gap which is not observed by GOCE would thus provide gradient predictions at a better accuracy, complementing the GOCE coverage in this region.     

Upscaling site‐scale ecohydraulic models to inform salmonid population‐level life cycle modeling and restoration actions – Lessons from the Columbia River Basin

With high‐resolution topography and imagery in fluvial environments, the potential to quantify physical fish habitat at the reach scale has never been better. Increased availability of hydraulic, temperature and food availability data and models have given rise to a host of species and life stage specific ecohydraulic fish habitat models ranging from simple, empirical habitat suitability curve driven models, to fuzzy inference systems to fully mechanistic bioenergetic models. However, few examples exist where such information has been upscaled appropriately to evaluate entire fish populations. We present a framework for applying such ecohydraulic models from over 905 sites in 12 sub‐watersheds of the Columbia River Basin (USA), to assess status and trends in anadromous salmon populations. We automated the simulation of computational engines to drive the hydraulics, and subsequent ecohydraulic models using cloud computing for over 2075 visits from 2011 to 2015 at 905 sites. We also characterize each site's geomorphic reach type, habitat condition, geomorphic unit assemblage, primary production potential and thermal regime. We then independently produce drainage network‐scale models to estimate these same parameters from coarser, remotely sensed data available across entire populations within the Columbia River Basin. These variables give us a basis for imputation of reach‐scale capacity estimates across drainage networks. Combining capacity estimates with survival estimates from mark–recapture monitoring allows a more robust quantification of capacity for freshwater life stages (i.e. adult spawning, juvenile rearing) of the anadromous life cycle. We use these data to drive life cycle models of populations, which not only include the freshwater life stages but also the marine and migration life stages through the hydropower system. More fundamentally, we can begin to look at more realistic, spatially explicit, tributary habitat restoration scenarios to examine whether the enormous financial investment on such restoration actions can help recover these populations or prevent their extinction. Copyright © 2017 John Wiley & Sons, Ltd.     

Shocked quartz grains in the early Cambrian Vakkejokk Breccia,Sweden—Evidence of a marine impact

Here we present a study of the abundance and orientation of planar deformation features (PDFs) in the Vakkejokk Breccia, a proposed lower Cambrian impact ejecta layer in the North‐Swedish Caledonides. The presence of PDFs is widely accepted as evidence for shock metamorphism associated with cosmic impact events and their presence confirms that the Vakkejokk Breccia is indeed the result of an impact. The breccia has previously been divided into four lithological subunits (from bottom to top), viz. lower polymict breccia (LPB), graded polymict breccia (GPB), top sandstone (TS), and top conglomerate (TC). Here we show that the LPB contains no shock metamorphic features, indicating that the material derives from just outside of the crater and represents low‐shock semi‐autochthonous bombarded strata. In the overlying, more fine‐grained GPB and TS, quartz grains with PDFs are relatively abundant (2–5% of the grain population), and with higher shock levels in the upper parts, suggesting that they have formed by reworking of more distal ejecta by resurge of water toward the crater in a marine setting. The absence of shocked quartz grains in the TC indicates that this unit represents later slumps associated with weathering and erosion of the protruding crater rim. Sparse shocked quartz grains (<0.2%) were also found in sandstone beds occurring at the same stratigraphic level as the Vakkejokk Breccia 15–20 km from the inferred crater site. It is currently unresolved whether the sandstone at these distal sites is related to the impact or just contains rare reworked quartz grains with PDFs.     

A Rapid Decision Support Tool for Estimating Impacts of a Vadose Zone Volatile Organic Compound Source on Groundwater and Soil Gas

Diminishing rates of subsurface volatile contaminant removal by soil vapor extraction (SVE) oftentimes warrants an in-depth performance assessment to guide remedy decision-making processes. Such a performance assessment must include quantitative approaches to better understand the impact of remaining vadose zone contamination on soil gas and groundwater concentrations. The spreadsheet-based Soil Vapor Extraction Endstate Tool (SVEET) software functionality has recently been expanded to facilitate quantitative performance assessments. The updated version, referred to as SVEET2, includes expansion of the input parameter ranges for describing a site (site geometry, source characteristics, etc.), an expanded list of contaminants, and incorporation of elements of the Vapor Intrusion Estimation Tool for Unsaturated-zone Sources software to provide soil gas concentration estimates for use in vapor intrusion evaluation. As part of the update, SVEET2 was used to estimate the impact of a tetrachloroethene (PCE) vadose zone source on groundwater concentrations, comparing SVEET2 results to field-observed values at an undisclosed site where SVE was recently terminated. PCE concentrations from three separate monitoring wells were estimated by SVEET2 to be within the range of 6.0–6.7 μg/L, as compared to actual field concentrations that ranged from 3 to 11 μg/L PCE. These data demonstrate that SVEET2 can rapidly provide representative quantitative estimates of impacts from a vadose zone contaminant source at field sites. In the context of the SVE performance assessment, such quantitative estimates provide a basis to support remedial and/or regulatory decisions regarding the continued need for vadose zone volatile organic compound remediation or technical justification for SVE termination, which can significantly reduce the cost to complete for a site.     

The chlorine isotope composition of Martian meteorites 2. Implications for the early solar system and the formation of Mars

We determined the chlorine isotope composition of 16 Martian meteorites using gas source mass spectrometry on bulk samples and in situ secondary ion microprobe analysis on apatite grains. Measured δ³⁷Cl values range from ?3.8 to +8.6‰. The olivine‐phyric shergottites are the isotopically lightest samples, with δ³⁷Cl mostly ranging from ?4 to ?2‰. Samples with evidence for a crustal component have positive δ³⁷Cl values, with an extreme value of 8.6‰. Most of the basaltic shergottites have intermediate δ³⁷Cl values of ?1 to 0‰, except for Shergotty, which is similar to the olivine‐phyric shergottites. We interpret these data as due to mixing of a two‐component system. The first component is the mantle value of ?4 to ?3‰. This most likely represents the original bulk Martian Cl isotope value. The other endmember is a ³⁷Cl‐enriched crustal component. We speculate that preferential loss of ³⁵Cl to space has resulted in a high δ³⁷Cl value for the Martian surface, similar to what is seen in other volatile systems. The basaltic shergottites are a mixture of the other two endmembers. The low δ³⁷Cl value of primitive Mars is different from Earth and most chondrites, both of which are close to 0‰. We are not aware of any parent‐body process that could lower the δ³⁷Cl value of the Martian mantle to ?4 to ?3‰. Instead, we propose that this low δ³⁷Cl value represents the primordial bulk composition of Mars inherited during accretion. The higher δ³⁷Cl values seen in many chondrites are explained by later incorporation of ³⁷Cl‐enriched HCl‐hydrate.     

Mantle peridotite in newly discovered far-inland subduction complex,southwest Arizona: initial report

The latest Cretaceous to early Palaeogene Orocopia Schist and related units are generally considered a low-angle subduction complex that underlies much of southern California and Arizona. A recently discovered exposure of Orocopia Schist at Cemetery Ridge west of Phoenix, Arizona, lies exceptionally far inland from the continental margin. Unexpectedly, this body of Orocopia Schist contains numerous blocks, as large as ~300 m, of variably serpentinized mantle peridotite. These are unique; elsewhere in the Orocopia and related schists, peridotite is rare and completely serpentinized. Peridotite and metaperidotite at Cemetery Ridge are of three principal types: (1) serpentinite and tremolite serpentinite, derived from dunite; (2) partially serpentinized harzburgite and olivine orthopyroxenite (collectively, harzburgite); and (3) granoblastic or schistose metasomatic rocks, derived from serpentinite, made largely of actinolite, calcic plagioclase, hercynite, and chlorite. In the serpentinite, paucity of relict olivine, relatively abundant magnetite (5%), and elevated Fe³⁺/Fe indicate advanced serpentinization. Harzburgite contains abundant orthopyroxene, only slightly serpentinized, and minor to moderate (1–15%) relict olivine. Mantle tectonite fabric is locally preserved. Several petrographic and geochemical characteristics of the peridotite at Cemetery Ridge are ambiguously similar to either abyssal or mantle-wedge (suprasubduction) peridotites and serpentinites. Least ambiguous are orthopyroxene compositions. Orthopyroxene is distinctively depleted in Al₂O₃, Cr₂O₃, and CaO, indicating mantle-wedge affinities. Initial interpretation of field and petrologic data suggests that the peridotite blocks in the Orocopia Schist subduction complex at Cemetery Ridge may be derived from the leading corner or edge of a mantle wedge, presumably in (pre-San Andreas fault) southwest California. However, derivation from a subducting plate is not precluded.