Some statistical characteristics of large deepwater waves around the Korean Peninsula

The relationship between significant wave height and period, the variability of significant wave period, the spectral peak enhancement factor, and the directional spreading parameter of large deepwater waves around the Korean Peninsula have been investigated using various sources of wave measurement and hindcasting data. For very large waves comparable to design waves, it is recommended to use the average value of the empirical formulas proposed by Shore Protection Manual in 1977 and by Goda in 2003 for the relationship between significant wave height and period. The standard deviation of significant wave periods non-dimensionalized with respect to the mean value for a certain significant wave height varies between 0.04 and 0.21 with a typical value of 0.1 depending upon different regions and different ranges of significant wave heights. The probability density function of the peak enhancement factor is expressed as a lognormal distribution, with its mean value of 2.14, which is somewhat smaller than the value in the North Sea. For relatively large waves, the probability density function of the directional spreading parameter at peak frequency is also expressed as a lognormal distribution.     

The thermal conductivity for granite with various water contents

The thermal conductivities of granite were measured under different conditions of porosity and water content to investigate the effects of the porosity and water content on the thermal conductivity. For the dry samples, the thermal conductivities range from 2.12 W/mK for the rocks with a high porosity to 3.12 W/mK for the ones with a low porosity. Water-sorbed samples have greater thermal conductivities than dry samples of the same granite. The thermal conductivities range from 2.99 W/mK for granites with a high porosity to 3.62 W/mK for ones with a low porosity under saturated condition.     

Application of wavelet transforms to the decoupling of free-roll decay data

This study presents the results of the decoupling of a free-roll decay test by wavelet transforms. A free-roll decay test was performed to determine the coefficients of damping terms in equations of motion. No motion of the model was restricted during the experiment. A slight yaw motion was found while the model was in the free-roll decay motion. It was necessary to extract a pure roll motion from the experimental data. Wavelet transforms were applied to the signals to extract the pure roll motion. The results were compared to those found through the Fourier transform. Discrete wavelet transforms were able to efficiently decouple the test signals, while the continuous wavelet transform and the Fourier transform could not.     

Field applicability of self-recovering sustainable liner as landfill final cover

Preventing the penetration of rainwater into a landfill site is the main purpose of the final cover in landfill sites. Conventional designs of landfill covers use geotextiles, such as geomembrane and geosynthetic clay liners, and clay liners to lower the permeability of the final cover of landfill sites. However, differential settlement and climatic effects in landfill sites instigate crack development or structural damage inside the final cover. This study therefore investigates the field applicability of a self-recovering sustainable liner (SRSL) as an alternative to the landfill final cover. The SRSL utilizes the precipitation reaction of two chemical materials to form precipitates that fill the pores and thereby lower the overall permeability of the liner. To examine the field applicability of the SRSL system, uniaxial compression tests and laboratory hydraulic conductivity tests were performed under various climatic effects such as wet/dry and freeze/thaw processes. Furthermore, field-scale hydraulic conductivity tests were performed with intentionally induced cracks to demonstrate the self-recovery performance for practical applications. Extensive laboratory and field test results confirmed the capability of the SRSL final cover system to fulfill the strength and hydraulic conductivity requirements, even in harsh field conditions.     

Enhanced bioremoval of refractory compounds from dyeing wastewater using optimized sequential anaerobic/aerobic process

The upflow anaerobic sludge blanket process followed by the biological aerated filter process was employed to improve the removal of color and recalcitrant compounds from real dyeing wastewater. The highest removal efficiency for color was observed in the anaerobic process, at 8-h hydraulic retention time, seeded with the sludge granule. In the subsequent aerobic process packed with the microbe-immobilized polyethylene glycol media, the removal efficiency for chemical oxygen demand increased significantly to 75 %, regardless of the empty bed contact time. The average influent non-biodegradable soluble chemical oxygen demand was 517 mg/L, and the average concentration in effluent from the anaerobic reactor was 363 mg/L, suggesting the removal of some recalcitrant matters together with the degradable ones. The average non-biodegradable soluble chemical oxygen demand in effluent from the aerobic reactor was 87, 93, and 118 mg/L, with the removal efficiency of 76, 74, and 67 %, at 24-, 12-, and 8-h empty bed contact time, respectively. The combined anaerobic sludge blanket and aerobic cell-entrapped process was effective to remove the refractory compounds from real dyeing wastewater as well as in reducing organic loading to meet the effluent discharge limits. This integrated process is considered an effective and economical treatment technology for dyeing wastewater.     

Derivative‐Assisted Classification of Fractured Zones Crossing a Deep Borehole

In this study, the derivative analysis using the derivative of drawdown with respect to log‐time was utilized to determine candidates for hydraulic conductor domains (HCDs). At a 500‐m deep borehole in the study site, the fractured rocks crossing the borehole were first classified in fractured and nonfractured zones by core logging and geophysical loggings, such as acoustic televiewing, density, and flow loggings. After conducting the hydraulic tests such as constant head withdrawal and recovery tests at the fractured zones and the nonfractured zones, the derivative analyses were carried out, of which the results were evaluated to determine the candidates for HCDs. For the nonfractured zones, the diagnostic plot has only a big hump indicating poor connection of the background fractures to the permeable geologic media, while those of the candidates for HCDs show various flow regimes. On the basis of these results, the candidates for HCDs among the fractured zones were determined. From discussion on the results, the combination of the spacing analysis and derivative analysis following a hydraulic test is recommended for determining the candidates for HCDs rather than other geophysical loggings.     

Classification of precipitation types using fall velocity-diameter relationships from 2D-video distrometer measurements

Fall velocity-diameter relationships for four different snowflake types (dendrite, plate, needle, and graupel) were investigated in northeastern South Korea, and a new algorithm for classifying hydrometeors is proposed for distrometric measurements based on the new relationships. Falling ice crystals (approximately 40 000 particles) were measured with a two-dimensional video disdrometer (2DVD) during a winter experiment from 15 January to 9 April 2010. The fall velocity-diameter relationships were derived for the four types of snowflakes based on manual classification by experts using snow photos and 2DVD measurements: the coefficients (exponents) for different snowflake types were 0.82 (0.24) for dendrite, 0.74 (0.35) for plate, 1.03 (0.71) for needle, and 1.30 (0.94) for graupel, respectively. These new relationships established in the present study (PS) were compared with those from two previous studies. Hydrometeor types were classified with the derived fall velocity-diameter relationships, and the classification algorithm was evaluated using 3× 3 contingency tables for one rain-snow transition event and three snowfall events. The algorithm showed good performance for the transition event: the critical success indices (CSIs) were 0.89, 0.61 and 0.71 for snow, wet-snow and rain, respectively. For snow events, the algorithm performance for dendrite and plate (CSIs = 1.0 and 1.0, respectively) was better than for needle and graupel (CSIs = 0.67 and 0.50, respectively).     

Microbiological response to well pumping

To better constrain sampling strategies for observing biologically sensitive parameters in ground water, we vigorously pumped for 120 h a lightly pumped well completed in a confined glacial aquifer while observing how various physical and chemical parameters evolve in the water produced. The parameters commonly monitored when sampling a well stabilized within about an hour, after 5 wellbore volumes were produced; these parameters include temperature, pH, dissolved oxygen, oxidation-reduction potential (Eh), and electrical conductivity. The concentrations of ferrous iron, sulfide, and sulfate and various biological or biologically sensitive parameters, including the concentrations of dissolved hydrogen and methane, direct cell counts, and the microbial community profile, in contrast, required more than 8 h or 36 well volumes to stabilize. We interpret this result to mean that the zone of influence of the wellbore on biologic processes in the aquifer extends beyond the commonly recognized zone where physical properties are affected. A second period of adjustment of these biologically sensitive parameters began after about 50 h of pumping, following displacement of 230 wellbore volumes, and continued to the end of the experiment. During this period, the cell density and the composition of the microbial community suspended in the water samples changed. This finding indicates that the microbial community in and near the wellbore changed in response to pumping and the changes affected aspects of the composition of water produced from the well. The study demonstrates the importance of allowing adequate pumping time when sampling ground water for the analysis of biologically sensitive parameters.     

Solution of an unstable axisymmetric Cauchy–Poisson problem of dispersive water waves for a spectrum with compact support

 It has been known that the axisymmetric Cauchy–Poisson problem for dispersive water waves is well posed in the sense of stability. Thereby time evolution solutions of wave propagation depend continuously on initial conditions. However, in this paper, it is demonstrated that the axisymmetric Cauchy–Poisson problem is ill posed in the sense of stability for a certain class of initial conditions, so that the propagating solutions do not depend continuously on the initial conditions. In order to overcome the difficulty of the discontinuity, Landweber–Fridman's regularization, famous and well known in applied mathematics, are introduced and investigated to learn whether it is applicable to the present axisymmetric wave propagation problem. From the numerical experiments, it is shown that stable and accurate solutions are realized by the regularization, so that it can be applicable to the determination of the ill-posed Cauchy–Poisson problem.