Modeling the effects of the variability of temperature-related dynamic viscosity on the thermal-affected zone of groundwater heat-pump systems

Thermal perturbation in the subsurface produced in an open-loop groundwater heat pump (GWHP) plant is a complex transport phenomenon affected by several factors, including the exploited aquifer’s hydrogeological and thermal characteristics, well construction features, and the temporal dynamics of the plant’s groundwater abstraction and reinjection system. Hydraulic conductivity has a major influence on heat transport because plume propagation, which occurs primarily through advection, tends to degrade following conductive heat transport and convection within moving water. Hydraulic conductivity is, in turn, influenced by water reinjection because the dynamic viscosity of groundwater varies with temperature. This paper reports on a computational analysis conducted using FEFLOW software to quantify how the thermal-affected zone (TAZ) is influenced by the variation in dynamic viscosity due to reinjected groundwater in a well-doublet scheme. The modeling results demonstrate non-negligible groundwater dynamic-viscosity variation that affects thermal plume propagation in the aquifer. This influence on TAZ calculation was enhanced for aquifers with high intrinsic permeability and/or substantial temperature differences between abstracted and post-heat-pump-reinjected groundwater.

     

Assessment of the acid drainage neutralization capacity and the toxic metals lixiviation of tailing from Guanajuato mining district,Mexico

In Mexico, many environmental problems are generated by large mining activities taking place in several mining districts. These mining activities produce great quantities of residues; large majorities of these have high sulfur content, which could generate acid drainage due to their interaction with the oxygen in the environment. The study area was located in the Mining District of Guanajuato, Mexico with abandoned tailings generated mainly by the gold and silver production. Two areas, called as Monte de San Nicolás (SN) and Peregrina (P) were selected for this study. The results study shows that there was no risk of production of acid drainage, since these tailings contained high amount of carbonates, which neutralized the generation of acidity and consequently decreased the possibility of leaching of some elements. However, not all elements leach in acid pH, as arsenic bound to oxyhydroxides, which is in a basic environment and its increased release by increasing the pH.     

Magma evolution beneath Bequia,Lesser Antilles,deduced from petrology of lavas and plutonic xenoliths

Extrusive and intrusive igneous rocks represent different parts of a magmatic system and ultimately provide complementary information about the processes operating beneath volcanoes. To shed light on such processes, we have examined and quantified the textures and mineral compositions of plutonic and cumulate xenoliths and lavas from Bequia, Lesser Antilles arc. Both suites contain assemblages of iddingsitized olivine, plagioclase, clinopyroxene and spinel with rare orthopyroxene and ilmenite. Mineral zoning is widespread, but more protracted in lavas than xenoliths. Plagioclase cores and olivine have high anorthite (An?≤?98) and low forsterite (Fo?≤?84) compositions respectively, implying crystallisation from a hydrous mafic melt that was already fractionated. Xenolith textures range from adcumulate to orthocumulate with variable mineral crystallisation sequences. Textural criteria are used to organize the xenoliths into six groups. Amphibole, notably absent from lavas, is a common feature of xenoliths, together with minor biotite and apatite. Bulk compositions of xenoliths deviate from the liquid line of descent of lavas supporting a cumulate origin with varying degrees of reactive infiltration by evolved hydrous melts, preserved as melt inclusions in xenolith crystals. Volatile saturation pressures in melt inclusions indicate cumulate crystallization over a 162–571 MPa pressure range under conditions of high dissolved water contents (up to 7.8 wt% H₂O), consistent with a variety of other thermobarometric estimates. Phase assemblages of xenoliths are consistent with published experimental data on volatile-saturated low-magnesium and high-alumina basalts and basaltic andesite from the Lesser Antilles at pressures of 200–1000 MPa, temperatures of 950–1050 °C and dissolved H₂O contents of 4–7 wt%. Once extracted from mid-crustal mushes, residual melts ascend to higher levels and undergo H₂O-saturated crystallization in shallow, pre-eruptive reservoirs to form phenocrysts and glomerocrysts. The absence of amphibole from lavas reflects instability at low pressures, whereas its abundance in xenoliths testifies to its importance in mid-crustal differentiation processes. A complex, vertically extensive (6 to at least 21 km depth) magmatic system is inferred beneath Bequia. Xenoliths represent fragments of the mush incorporated into ascending magmas. The widespread occurrence of evolved melts in the mush, but the absence of erupted evolved magmas, in contrast to islands in the northern Lesser Antilles, may reflect the relative immaturity of the Bequia magmatic system.     

Opportunities accruing from the application of public private partnerships in down market urban housing in Kenya

GeoJournal - The purpose of this study was to investigate the opportunities which accrue from application of PPPs in development of down market urban housing in Kenya, hence attracting private...     

Development,urban planning and political decisions. A triad that built territories at risk

Natural Hazards - Chilean geography exposes the country to high-level risks such as earthquakes and tsunamis. The disasters of 1930, 1960, 2010, and 2014 testify to the continuous link between...     

Relationships Between Petrophysical and Mechanical Properties of Certain Calcarenites Used in Building

Mendicino calcarenite was once widely used in traditional constructions by Italy’s foremost stonemasons’ schools. This paper provides a complete physico-mechanical characterization in order to improve understanding of strength and durability properties and so apply that knowledge to conservation and new construction. Stone samples from three lithofacies are taken from the following quarries of Cosenza province: Scannelle in Malito; Cannataro in Carolei; Albanese in San Lucido. Samples are subjected to: X-ray diffraction, mercury intrusion porosimetry, ultrasonic pulse velocity, capillary water absorption, uniaxial compressive, flexural, point load tests with respect to the X, Y, Z axes. Malito samples exhibit creamy colour, better hydric behaviour, low open porosity, reduced water absorption capability, isotropic hydric behaviour, higher fossil abundance (both in number and size) than the lithofacies taken from Carolei and San Lucido, which exhibit whitish colour, greater strength and more homogeneous texture. The greater compactness of Carolei and San Lucido samples can be ascribed to homogeneity and low porosity and their better mechanical properties to textural features. Anisotropy plays an important role. Placing stone samples along the Z axis prevents water intrusion, and improves mechanical strength. Isotropy and compact and heterogeneous fabric in stones result in higher strength and lower water absorption.

     

9000 years of changes in peat organic matter composition in Store Mosse (Sweden) traced using FTIR-ATR

Store Mosse (the ‘Great Bog’ in Swedish) is one of the most extensive bog complexes in southern Sweden (~77 km²), where pioneering palaeoenvironmental research has been carried out since the early 20th century. This includes, for example, vegetation changes, carbon and nitrogen dynamics, peat decomposition, atmospheric metal pollution, mineral dust deposition, dendrochronology, and tephrochronology. Even though organic matter (OM) represents the bulk of the peat mass and its compositional change has the potential to provide crucial ecological information on bog responses to environmental factors, peat OM molecular composition has not been addressed in detail. Here, a 568-cm-deep peat sequence was studied at high resolution, by attenuated reflectance Fourier-transform infrared spectroscopy (FTIR-ATR) in the mid-infrared region (4000–400 cm^–1). Principal components analysis was performed on selected absorbances and change-point modelling was applied to the records to determine the timing of changes. Four components accounted for peat composition: (i) depletion/accumulation of labile (i.e. carbohydrates) and recalcitrant (i.e. lignin and other aromatics, aliphatics, organic acids and some N compounds) compounds, due to peat decomposition; (ii) variations in N compounds and carbohydrates; (iii) residual variation of lignin and organic acids; and (iv) residual variation of aliphatic structures. Peat decomposition showed two main patterns: a long-term trend highly correlated to peat age (r = 0.87), and a short-term trend, which showed five main phases of increased decomposition (at ~8.4–8.1, ~7.0–5.6, ~3.5–3.1, ~2.7–2.1 and ~1.6–1.3 ka) – mostly corresponding to drier climate and its effect on bog hydrology. The high peat accumulation event (~5.6–3.9 ka), described in earlier studies, is characterized by the lowest degree of peat decomposition of the whole record. Given that FTIR-ATR is a quick, non-destructive, cost-effective technique, our results indicate that it can be applied in a systematic way (including multicore studies) to peat research and provide relevant information on the evolution of peatlands.     

Resource Model Updating For Compositional Geometallurgical Variables

In the field of mineral resources extraction, one main challenge is to meet production targets in terms of geometallurgical properties. These properties influence the processing of the ore and are often represented in resource modeling by coregionalized variables with a complex relationship between them. Valuable data are available about geometalurgical properties and their interaction with the beneficiation process given sensor technologies during production monitoring. The aim of this research is to update resource models as new observations become available. A popular method for updating is the ensemble Kalman filter. This method relies on Gaussian assumptions and uses a set of realizations of the simulated models to derive sample covariances that can propagate the uncertainty between real observations and simulated ones. Hence, the relationship among variables has a compositional nature, such that updating these models while keeping the compositional constraints is a practical requirement in order to improve the accuracy of the updated models. This paper presents an updating framework for compositional data based on ensemble Kalman filter which allows us to work with compositions that are transformed into a multivariate Gaussian space by log-ratio transformation and flow anamorphosis. This flow anamorphosis, transforms the distribution of the variables to joint normality while reasonably keeping the dependencies between components. Furthermore, the positiveness of those variables, after updating the simulated models, is satisfied. The method is implemented in a bauxite deposit, demonstrating the performance of the proposed approach.

     

Structure and distribution of the benthic macrofauna on a Northwest African sandy beach close to a freshwater river discharge

The effects of the freshwater discharge of the Oued Sebou River on the macroinfauna, was studied on the sandy beach of Mehdia through the analysis of the abiotic parameters and of the macrozoobenthos. In autumn 2002 and spring 2003, three beach sites, each with two transects, localized at 50, 3500 and 5720 m from the river mouth respectively, were studied. Positive correlations were recorded for beach slope and pH whereas negative ones were obtained for organic matter content and salinity at increasing distances from the river mouth. Significant differences between beach sites and seasons occurred for median grain size, organic matter content and pH. For each beach site, mean macroinfauna abundance varied between 30 and 100 ind.·m⁻² and in spring there was a significant correlation between this parameter and the increasing distance from the river mouth. No significant correlation was instead found between species richness and the increasing distance, although the farthest beach site from the mouth had the highest number of species during both seasons. The results indicated the importance of organic matter content and salinity for the macrofaunal abundance whereas the diversity indices were more affected by beach slope and grain size. The results showed that there was no clear spatial trend in compound indices of the macrofauna across the sampled sites and the influence of the river discharge of Sebou River did not seem to be significant and consistent on the macrobenthos of this mesotidal shore. Comparison with microtidal shores revealed the influence of the tidal excursion and swell characteristics on the response of the benthic structures of sandy beaches to discharges of freshwater.     

Lakes of the Jom-Bolok Volcanoes Valley in the East Sayan Mts., Baikal region

Journal of Geographical Sciences - This article describes the lake basins of the Jom-Bolok volcanic region in the East Sayan (the largest manifestation of the Holocene eruptions in Central Asia)....