Trace metals and hydrocarbons in sediments from the Southampton water region,with particular reference to the influence of oil refinery effluent

The concentrations of a number of trace metals (Co, Ni, Cu, Zn, Ag, Cd and Hg) have been determined in sediments from cores collected in the Southampton Water region. Measurements of total hydrocarbons were also made on several of the cores. Markedly elevated concentrations of copper, up to 362 μg/g dry wt, were found in sediments which were collected close to the discharge points of oil refinery outfalls and which also showed concentrations of total hydrocarbons considerably greater than the background levels for the estuary. The results of selective chemical extractions showed that much of the copper was present in the non-lattice fraction of the sediment. Although the concentrations of Co, Ni, Zn and Cd were significantly correlated with those of copper in the core showing the highest concentrations of this element, these metals were not enhanced in comparison with the levels found in several other parts of the estuary. Variations in concentrations of metals in sediments throughout the estuary were not correlated with differences in organic carbon content.     

Significance of vertical flux as a sink for surface water DMSP and as a source for the sediment surface in coastal zones of northern Europe

In April 1997 and 1998 the significance of sedimentation as a sink for epipelagic dimethylsulphoniopropionate (DMSP) production and as a source for marine sediments was reassessed using a newly designed sediment trap. The behaviour of the traps in immersion was monitored continuously and the collection efficiency was evaluated with ²³⁴Th measurements. Net DMS(P) fluxes were corrected for some physical and biological losses during the whole sedimentation process providing reliable estimates of gross DMSP fluxes. It is shown that daily losses by sedimentation account for between 0.1% and 16% of seawater particulate DMSP (DMSPp) standing stocks, and between 3% and 75% of daily DMSPp production. In the Malangen fjord we observed temporal increases of DMSP production and standing stocks which resulted also in increases of DMSP vertical fluxes and DMS(P) concentrations at the sediment surface. This result illustrates how tight the coupling can be between pelagos and benthos, and confirms that DMS(P) concentration in the sediment was a reliable diagnostic indicator of vertical export from overlying waters in Malangen fjord. In Ullsfjord, however, DMS(P) concentrations in the sediment were poorly indicators of Phaeocystis pouchetii export during the early stage of growth of a bloom. The high load of DMS(P) in Balsfjord's sediments could neither be attributed to local vertical sedimentation nor to short-term lateral advection of fresh DMSP-containing phytoplanktonic material, and provides indication that this tracer sometimes also can be misleading. The highest loads of DMS(P) in sediments and the fastest rates of sedimentation occurred in the Southern Bight of the North Sea.     

The ionization balance of the Fe in the solar corona for a non-Maxwellian electron distribution function

The ionization equilibrium of the Fe in the solar corona for a non-Maxwellian electron distribution with an enhanced number of particles in the high-energy tail is presented. A parametric form of the distribution function is used to demonstrate the changes in the ionization equilibrium with changes in the shape of the distribution. The results over the range of temperature 10⁵ K T 10⁸ K for different deviations of the distribution from a Maxwellian are given in tabular form. The results can be used for specific applications in the solar corona, especially in the active corona, where deviations from the Maxwellian distribution can be significant.     

Contributions of boron isotopes to understanding the hydrogeochemistry of the coastal detritic aquifer of Castellón Plain,Spain

The Castellón Plain alluvial aquifer, Spain, is intensively exploited to meet the demand for agricultural irrigation and industrial water supply. The geochemistry of its groundwater shows complex salinization in the northern and southern parts of the aquifer, with significant pollution from human origin in the central portion. Boron content and B isotope geochemistry are useful for distinguishing between various sources of pollution and their relative importance in different parts of this aquifer. Boron concentrations in the groundwater vary between 0.01 and 0.85 mg/L. In the more saline groundwaters, found at the northern and southern ends of the study area, the presence of B is linked to inputs from seawater and water with a calcium-magnesium sulphate facies, which feed the aquifer and clearly influence the chemistry of its waters. Evidence of B adsorption processes in some samples is shown by the low B/Cl ratios and the high values of δ¹¹B. In the central portion of the aquifer, the high B/Cl ratios and the strongly negative δ¹¹B are related to pollution of human origin.     

Once more on quasar periodicities

In an earlier paper Arp, Bi, Chu and Zhu investigated various quasar samples and recognized a periodicity of remarkable degree in them. Their conclusion was that the existence of such a periodicity is a counterevidence against the cosmological origin of quasar redshifts. Since this question is of great importance in a cosmological context, here we reanalyze some of the samples together with a galaxy sample of the pencil-beam survey of Broadhurstet al. Our result is that on the plane of cosmological parameters (₀, ₀) there is a non-negligible region where two quasar samples and the galaxy sample are simultaneously fairly periodic. Pure periodicity is still compatible with cosmological principles, at least on length scales much longer than the period length. So the regularities can fit into a cosmological context.     

Interglacial History of a Palaeo-lake and Regional Environment: A Multi-proxy Study of a Permafrost Deposit from Bol’shoy Lyakhovsky Island, Arctic Siberia

Chironomid, pollen, and rhizopod records from a permafrost sequence at Bol’shoy Lyakhovsky Island (New Siberian Archipelago) document the development of a thermokarst palaeo-lake and environmental conditions in the region during the last Interglacial (MIS 5e). Open Poaceae and Artemisia associations dominated vegetation at the beginning of the interglacial period. Rare shrub thickets (Salix, Betula nana, Alnus fruticosa) grew in more protected and wetter places as well. Saalian ice wedges started to melt during this time, resulting in the formation of an initial thermokarst water body. The high percentage of semi-aquatic chironomids suggests that a peatland-pool initially existed at the site. A distinct decrease in semi-aquatic chironomid taxa and an increase in lacustrine ones point to a gradual pooling of water in the basin, which could in turn induce thermokarst and create a permanent pond during the subsequent period. The highest relative abundance of Chironomus and Procladius reflects unfrozen water remaining under the ice throughout the ice-covered period during the later stage of palaeo-lake development. The chironomid record points to three successive stages during the history of the lake: (1) a peatland pool; (2) a pond (i.e., shallower than the maximum ice-cover thickness); and (3) a shallow lake (i.e., deeper than the maximum ice-cover thickness). The trend of palaeo-lake development indicates that intensive thermokarst processes occurred in the region during the last Interglacial. Shrub tundra communities with Alnus fruticosa and Betula nana dominated the vegetation during the interglacial optimum. The climate was moister and warmer than present. The results of this study suggest that quantitative chironomid-based temperature reconstructions from Arctic thermokarst ponds/lakes may be problematic due to other key environmental factors, such as prolonged periods of winter anoxia and local hydrological/geomorphological processes, controlling the chironomid assemblages.     

Effect of sampling and linkage on fault length and length–displacement relationship

The power-law exponent (n) in the equation: D=cL ⁿ , with D = maximum displacement and L = fault length, would be affected by deviations of fault trace length. (1) Assuming n=1, numerical simulations on the effect of sampling and linkage on fault length and length–displacement relationship are done in this paper. The results show that: (a) uniform relative deviations, which means all faults within a dataset have the same relative deviation, do not affect the value of n; (b) deviations of the fault length due to unresolved fault tip decrease the values of n and the deviations of n increase with the increasing length deviations; (c) fault linkage and observed dimensions either increase or decrease the value of n depending on the distribution of deviations within a dataset; (d) mixed deviations of the fault lengths are either negative or positive and cause the values of n to either decrease or increase; (e) a dataset combined from two or more datasets with different values of c and orders of magnitude also cause the values of n to deviate. (2) Data including 19 datasets and spanning more than eight orders of fault length magnitudes (10⁻²–10⁵ m) collected from the published literature indicate that the values of n range from 0.55 to 1.5, the average value being 1.0813, and the peak value of n _d (double regression) is 1.0–1.1. Based on above results from the simulations and published data, we propose that the relationship between the maximum displacement and fault length in a single tectonic environment with uniform mechanical properties is linear, and the value of n deviated from 1 is mainly caused by the sampling and linkage effects.     

Russia at GHG Market

In the first Kyoto commitment period Russia could be the major supplier for the greenhouse gases (GHG) emissions market. Potential Russian supply depends on the ability of Russia to keep GHG emissions lower than the Kyoto target. In the literature there is no common understanding of the total trading potential of Russia at the international carbon market. In this paper we focus on CO₂ emission, which constituted nearly 80%of Russian GHG emission. We compare different projections of Russian CO₂emission and analyze the most important factors, which predetermine the CO₂emission growth. In a transition economy these factors are: Gross Domestic Product(GDP) dynamic, changes of GDP structure, innovation activity, transformation of export-import flows and response to the market signals. The input-output macroeconomic model with the two different input-output tables representing old and new production technologies has been applied for the analysis to simulate technological innovations and structural changes in the Russian economy during transition period. The Russian supply at the international GHG market without forest sector may be up to 3 billion metric ton of CO₂ equivalent. Earlier actions to reduce CO₂ emission are critical to insure theRussiansupply at the international carbon market. With regard to the current status of the Russian capital market, the forward trading with OECD countries is only the possibility to raise initial investments to roll no-regret and low-cost GHG reduction. This paper discusses uncertainties of RussianCO₂emission dynamics and analyzes the different incentives to lower the emission pathway.