Eastern Aphrodite Terra on Venus: Characteristics,structure, and mode of origin

Eastern Aphrodite Terra and Western Aphrodite form an altimetrically prominent 14,000 km long part of the equatorial highlands on Venus. Several parallel linear discontinuities striking northwest across the general east-west regional strike of the highlands are mapped in the altimetric and radar image data of Eastern Aphrodite and identified on the basis of abrupt termination of rift-like central chasma, offset and segmentation of the center of the highlands, and radar image discontinuities in the lowlands to the north. These characteristics are similar to those of linear discontinuities previously mapped in Western Aphrodite in terms of length, orientation, and influence on the central highlands and adjacent lowlands.Altimetric profiles in directions parallel to the discontinuities are regionally symmetric, more ridge-like in Eastern Aphrodite compared to the plateau-dominated form of topography in Western Aphrodite, and are characterized by alternating paired ridge-and-trough forms near their crests and on their flanks. By mapping the center of symmetry in multiple profiles, the prominent segmentation of the highland is shown to be imparted by an offset of the regional symmetry along the mapped discontinuities. These characteristics are morphologically similar to several of the large-scale characteristics of divergent plate boundaries of Earth, including mid-ocean rise crests and rifts, offset at fracture zones and transform faults, and symmetric thermal boundary layer topography.The altitude of the surface in profiles parallel to the discontinuities decreases as the square root of distance from the symmetry axes and with a slope similar to that predicted for thermal boundary layer topography associated with rates of divergence on Venus of ~ 1 ± 0.5 cm/yr. In order to test the hypothesis that the linear discontinuities are analogous to fracture zones, the predicted altitude of the surface at great distance from the centers of symmetry of the central highland and in directions across the discontinuities was calculated on the basis of a thermal boundary layer topography model with offset of altimetric symmetry at each discontinuity. Similarity of observed Arecibo high-resolution altimetric profiles across the discontinuities with that calculated for thermal boundary layer topography offset by transform faults reveals that in terms of the sense and magnitude of regional steps in altimetry across discontinuities and the altitude of the surface, Eastern Aphrodite is similar to the known characteristics of crustal spreading at divergent boundaries. The plateau-like form of Western Aphrodite and the ridge-like form of Eastern Aphrodite are analogous respectively to the difference between areas of anomalous (Iceland) and normal crustal production along rise crests on Earth. Estimates of volumetric differences in crustal production in the environment of Venus and as it would be influenced by differences in mantle temperature beneath Western and Eastern Aphrodite imply that Eastern Aphrodite represents normal crustal production. On this basis, Western Aphrodite may be characterized by a mantle temperature that is warmer than the mantle beneath Eastern Aphrodite Terra, perhaps in association with deep convective mantle upwelling.'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci., Moscow), James W. Head (Brown University, Providence), Gordon H. Pettengill (MIT. Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).     

SHRIMP U–Pb ages of diagenetic and hydrothermal xenotime from the Archaean Witwatersrand Supergroup of South Africa

SHRIMP dating of xenotime overgrowths on detrital zircon grains can constrain maximum durations since diagenesis and therefore provide minimum dates of sediment deposition. Thus, xenotime dating has significant economic application to Precambrian sediment-hosted ore deposits, such as Witwatersrand Au–U, for which there are no precise depositional ages. The growth history of xenotime in the Witwatersrand Supergroup is texturally complex, with several phases evident. The oldest authigenic xenotime ²⁰⁷Pb/²⁰⁶Pb age obtained in sandstone underlying the Vaal Reef is 2764 ± 5 Myr (1 σ), and most likely represents a mixture of diagenetic and hydrothermal growth. Nevertheless, this represents the oldest authigenic mineral age yet recorded in the sequence and provides a minimum age of deposition. Other xenotime data record a spread of ages that correspond to numerous post-diagenetic thermotectonic events (including a Ventersdorp event at ≈ 2720 Ma) up to the ≈2020 Ma Vredefort event.     

The mass ratio of Nova Muscae 1991

We report intermediate resolution H spectroscopy of the black hole candidate Nova Muscae 1991 during quiescence. We classify the companion star as a K3-K4V which contributes 85±6 percent to the total flux from the binary. The photospheric absorption lines are broadened by 106±13 kms⁻¹ with respect to template field stars, leading to a system mass ratio of q =M₁/M₂ = 7.8_−2.0^+3.4. Doppler imaging of the H line shows strong emission coming from the secondary star (EW=3.1±0.6Å) which we associate with chromospheric activity. However, the hot-spot is not detected and this may indicate a lower mass transfer rate than in other X-ray transients of comparable orbital periods. The surface brightness distribution of the accretion disk in H follows a relation I∝R^−1.1, less steep than typically observed in cataclysmic variables. Updated system parameters are also presented.     

Near-Infrared Imaging Spectrophotometry Of Comet C/1995 O1 (Hale-Bopp) Near Perihelion

We present 1- to 5-μm broadband and CVF images of comet Hale-Bopp taken 1997 February 10.5 UT, 50 days before perihelion. All the images exhibit a nonspherical coma with a bright “ridge” in the direction of the dust tail approximately 10″ from the coma. Synthetic aperture spectrophotometry implies that the optically important grains are of a radius ≤0.4 μm; smallest radius for any comet seen to date. The variation of the integrated surface brightness with radial distance from the coma (ρ) in all the images closely follows the “steady state” ρ⁻¹ model for comet dust ablation (Gehrz and Ney, 1992). The near-infrared colors taken along the dust tail are not constant implying the dust grain properties vary with coma distance. This revised version was published online in July 2006 with corrections to the Cover Date.     

Simulation of adaptive optics for the Vacuum Tower Telescope

A simulation model of the adaptive optics of the German Vacuum Tower Telescope (VTT), Observatorio del Teide, Tenerife, is presented. The model uses modules from the integrated model of the Euro50 extremely large telescope, and includes submodels of a Shack-Hartmann wavefront sensor, a de-formable mirror, a tip-tilt mirror, high-voltage amplifier low-pass filters, a reconstructor and a controller. We investigate the impact on the closed loop bandwidth of changes in controller configuration and certain system parameters, such as low pass filter bandwidth and camera integration and readout time. Control strategies were tested on simple models before implementation on the full VTT model. Using the models, different control strategies are compared.     

A Quantitative Method to Optimise Magnetic Field Line Fitting of Observed Coronal Loops

Many authors use magnetic-field models to extrapolate the field in the solar corona from magnetic data in the photosphere. The accuracy of such extrapolations is usually judged qualitatively by eye, where a less judgemental quantitative approach would be more desirable. In this paper, a robust method for obtaining the best fit between a theoretical magnetic field and intensity observations of coronal loops on the solar disk will be presented. The method will be applied to Yohkoh data using a linear force-free field as an illustration. Any other theoretical model for the magnetic field can be used, provided there is enough freedom in the model to optimize the fit.     

Structurally controlled gold and sulfosalt mineralization: the Altenberg example, Salzburg Province, Austria

Summary ?In the south-eastern Altenbergkar–Silbereck area in the eastern Tauern window (Lungau, Salzburg) structurally controlled precious-metal (Au–Ag) mineralization is hosted in marbles of the Permo(?)-Mesozoic Silbereck Formation and in the underlying Variscan Central gneiss. During the Alpine otogeny both lithologies were affected by ductile deformation (shearing, D1; folding, D2/D3) and subsequent brittle deformation (tension gashes, D4; normal faulting, D5) related to the uplift and exhumation of the Tauern window. Mineralization is controlled by brittle D4 structures. NE–SW trending steeply dipping tension gashes of the “Tauerngoldgang” type occur within the Central gneiss. Three different marble-hosted ore types following fracture systems as well as foliation and bedding planes can be distinguished: 1) metasomatic replacement ores, 2) ores in tension gashes and 3) ores in talc-bearing structures, often containing high-grade gold and silver mineralization (native gold in association with Ag–Pb–Bi–sulfosalts). Four stages of mineralization can be distinguished which occur in all ore types: arsenopyrite–pyrite–pyrrhotite (first stage), Au–(Ag–Pb–Bi–sulfosalts) (second stage), base-metal sulfides and tetrahedrite–tennantite (third stage) and Ag-rich galena (fourth stage). Preliminary fluid inclusion data indicate temperatures of ore formation well above 300 °C (346 °C mean) for the second stage within the Central gneiss and temperatures between 310 and 230 °C for the second and third stages in the marble. Received October 12, 2001; revised version accepted September 5, 2002 Published online March 10, 2003     

Richtmyer-Meshkov Experiments on the Omega Laser

Observations of the interstellar medium reveal a dynamic realm permeated by shocks. These shocks are generated on a large range of scales by galactic rotation, supernovae, stellar winds, and other processes. Whenever a shock encounters a density interface, Richtmyer-Meshkov instabilities may develop. Perturbations along the interface grow, leading to structure formation and material mixing. An understanding of the evolution of Richtmyer-Meshkov instabilities is essential for understanding galactic structure, molecular cloud morphology, and the early stages of star formation. An ongoing experimental campaign studies Richtmyer-Meshkov mixing in a convergent, compressible, miscible plasma at the Omega laser facility. Cylindrical targets, consisting of a low density foam core and an aluminum shell covered by an epoxy ablator, are directly driven by fifty laser beams. The aluminum shell is machined to produce different perturbation spectra. Surface types include unperturbed (smooth), single-mode sinusoids, multi-mode (rough), and multi-mode with particular modes accentuated (specified-rough). Experimental results are compared to theory and numerical simulations.