Surveying Upstate NY Well Water for Pesticide Contamination: Cayuga and Orange Counties

Private wells in Cayuga and Orange counties in New York were sampled to determine the occurrence of pesticide contamination of groundwater in areas where significant pesticide use coincides with shallow or otherwise vulnerable groundwater. Well selection was based on local groundwater knowledge, risk modeling, aerial photo assessments, and pesticide application database mapping. Single timepoint samples from 40 wells in each county were subjected to 93‐compound chromatographic scans. All samples were nondetects (reporting limits ≤1 μg/L), thus no wells from either county exceeded any of 15 state groundwater standards or guidance values. More sensitive enzyme‐linked immunosorbent assays (ELISA) found two wells with quantifiable atrazine in each county (0.1–0.3 μg/L), one well with quantifiable diazinon (0.1 μg/L) in Orange County, and one well with quantifiable alachlor (0.2 μg/L) in Cayuga County. Trace detections (<0.1 μg/L) in Cayuga County included atrazine (five wells), metolachlor (six wells), and alachlor (one well), including three wells with multiple detections. All 12 Cayuga County wells with ELISA detections had either corn/grain or corn/forage rotations as primary surrounding land uses (although 20 other wells with the same land uses had no detections) and all quantified detections and most trace detections occurred in wells up to 9‐m deep. Orange County trace (<0.1 μg/L) ELISA detections (atrazine three wells, diazinon one well, and metolachlor five wells) and quantified detections were only generally associated with agricultural land uses. Finding acceptable drinking water quality in areas of vulnerable groundwater suggests that water quality in less vulnerable areas will also be good.     

A hydrothermal deposit from explorer ridge in the northeast Pacific Ocean

Crusts composed of nontronite and ferromanganese oxides were recovered from Explorer Ridge, a spreading ridge segment in the northeastern Pacific Ocean located off the west coast of Canada. The chemical and mineralogical composition of the crusts closely resembles that of the mound-like hydrothermal deposits recently discovered at the FAMOUS site on the Mid-Atlantic Ridge and on the Galapagos spreading centre. Compositional anomalies suggest that the crusts are precipitates of hydrothermal vent solutions which were ejected discontinuously and subsequently mixed with seawater.     

From global to local: Testing the potential of cross-scaling in global data sets

The present study investigates the potential of readily available and easily accessible global data sets to understand regional/local level interactions in wetland systems. The biogeographical zones of India were used a base-frame to select three sites. The study well fits the interests of National Wetland Committee of India to investigate and document fundamental information on wetland extent/distribution. The national partnership with SACON represents this interest. SACON commenced the inland wetland inventory module at national scale using geospatial data, although the provincial scale analysis is underway. In addition, the global irrigated area mapping (GIAM-IWMI) project generated multi-scalar spatial outputs for irrigated/rain-fed areas. With the existing information base, a multi-level geospatial analysis using Arc GIS algorithmic modelling was used to derive comprehensive appraisal of wetland systems complementing the data from GIAM and SACON. It was observed that the overlap between the two layers was 58 percent for Gujarat and 10 percent in Tamil Nadu. In Krishna basin the wetland’s cover 1.04 million hectare excluding the rice agro-ecosystem. The difference in the biogeography of the case sites governs the gradient of information derived from both data layers. Additionally, the global lakes and wetlands database (GLWD) database added thematic information on coastal wetlands. In summary we describe the cross-scaling the global data layers to compliment the regional/national level monitoring assignments.     

极地考察站三维信息系统的设计与实现

对南极考察站三维模型的建立和发布进行研究,深入解析KML文件,提出多个模型组合发布的方法。基于研究成果设计并实现数字极地考察站三维信息系统。     

Simultaneous estimation of cross-validation errors in least squares collocation applied for statistical testing and evaluation of the noise variance components

The cross-validation technique is a popular method to assess and improve the quality of prediction by least squares collocation (LSC). We present a formula for direct estimation of the vector of cross-validation errors (CVEs) in LSC which is much faster than element-wise CVE computation. We show that a quadratic form of CVEs follows Chi-squared distribution. Furthermore, a posteriori noise variance factor is derived by the quadratic form of CVEs. In order to detect blunders in the observations, estimated standardized CVE is proposed as the test statistic which can be applied when noise variances are known or unknown. We use LSC together with the methods proposed in this research for interpolation of crustal subsidence in the northern coast of the Gulf of Mexico. The results show that after detection and removing outliers, the root mean square (RMS) of CVEs and estimated noise standard deviation are reduced about 51 and 59%, respectively. In addition, RMS of LSC prediction error at data points and RMS of estimated noise of observations are decreased by 39 and 67%, respectively. However, RMS of LSC prediction error on a regular grid of interpolation points covering the area is only reduced about 4% which is a consequence of sparse distribution of data points for this case study. The influence of gross errors on LSC prediction results is also investigated by lower cutoff CVEs. It is indicated that after elimination of outliers, RMS of this type of errors is also reduced by 19.5% for a 5 km radius of vicinity. We propose a method using standardized CVEs for classification of dataset into three groups with presumed different noise variances. The noise variance components for each of the groups are estimated using restricted maximum-likelihood method via Fisher scoring technique. Finally, LSC assessment measures were computed for the estimated heterogeneous noise variance model and compared with those of the homogeneous model. The advantage of the proposed method is the reduction in estimated noise levels for those groups with the fewer number of noisy data points.     

Developing a long-term monitoring network under uncertain flowpaths

A long-term monitoring well network is developed using complementary and simple approaches in conjunction with a stochastic ground water flow and transport model. The development is illustrated for a case study of a U.S. nuclear testing site (Shoal) that is undergoing environmental restoration. The network design builds on three different, yet complementary, tools for locating the monitoring wells with a main objective of detection monitoring. The first tool is applied to select potential siting horizons where monitoring wells could be located. The second tool is used to place monitoring wells in locations with high success probability. The success here is defined as the detection of migrating stochastic plumes before a certain mass percentage reaches a compliance boundary. The third tool is used to analyze detection efficiency of multiple combinations of three wells. Seventy-six different three-well networks are selected from 20 candidate locations and are evaluated for detection efficiency. From the 76 networks analyzed, 28 attain detection efficiency close to or above 70%. The results of the different analyses provide multiple alternatives for the locations of the three wells, which will become part of the long-term monitoring network at Shoal. A number of combinations are equally good, and the final choice will depend on practical considerations and future agreements between model sponsor and regulators.     

The mean value concept in mono-linear regression of multi-variables and its application to trace studies in geosciences

The "mean value concept" in a mono-linear regression of multi-variables is clarified.Its applications to reconstruction of the past 90-year salinity of the sea surface water in Xisha Islands and to tracing the past 80 ka paleo-geomagnetic events from the Luochuan loess 10Be record are introduced in detail,which show the significance and the potential of the "mean value concept" in geoscience research.     

Automatic Interpretation of Magnetic Data Using Euler Deconvolution with Nonlinear Background

The voluminous gravity and magnetic data sets demand automatic interpretation techniques like Naudy, Euler and Werner deconvolution. Of these techniques, the Euler deconvolution has become a popular choice because the method assumes no particular geological model. However, the conventional approach to solving Euler equation requires tentative values of the structural index preventing it from being fully automatic and assumes a constant background that can be easily violated if the singular points are close to each other. We propose a possible solution to these problems by simultaneously estimating the source location, depth and structural index assuming nonlinear background. The Euler equation is solved in a nonlinear fashion using the optimization technique like conjugate gradient. This technique is applied to a published synthetic data set where the magnetic anomalies were modeled for a complex assemblage of simple magnetic bodies. The results for close by singular points are superior to those obtained by assuming linear background. We also applied the technique to a magnetic data set collected along the western continental margin of India. The results are in agreement with the regional magnetic interpretation and the bathymetric expressions.     

Structure and collapse of three-dimensional magnetic neutral points

Abstract

The structure and collapse of linear three-dimensional magnetic neutral points is studied by varying the four parameters (p, q,j_|,j_⊥ ) that define, in general, the linear field of a neutral point. The effect of these parameters on both the skeleton structure (i.e. the fan and spine) and the actual field line structure of the null is considered. It is found that one current component (j_⊥ ) causes the skeleton structure of the null to fold up from its potential state, whereas the other current component (j _|;) causes the field lines to bend. The two other parameters (p,q) determine the potential structure of the null and cause the null to transform from a three-dimensional null to a two-dimensional null and from a positive (type B) null to a negative (type A) null.

To investigate the collapse of three-dimensional nulls, solutions to the linear, low-β ideal magnetohydrodynamic equations are found. It is found that three-dimensional null points can collapse if the field line foot-points are free and energy can propagate into the system.