A B-spline based higher order panel method for analysis of steady flow around marine propellers

A higher order panel method based on B-spline representation for both the geometry and the solution is developed for the analysis of steady flow around marine propellers. The self-influence functions due to the normal dipole and the source are desingularized through the quadratic transformation, and then shown to be evaluated using conventional numerical quadrature. By selecting a proper order for numerical quadrature, the accuracy of the present method can be increased to the machine limit. The far- and near-field influences are shown to be evaluated based on the same far-field approximation, but the near-field solution requires subdividing the panels into smaller subpanels continuously, which can be effectively implemented due to the B-spline representation of the geometry. A null pressure jump Kutta condition at the trailing edge is found to be effective in stabilizing the solution process and in predicting the correct solution. Numerical experiments indicate that the present method is robust and predicts the pressure distribution on the blade surface, including very close to the tip and trailing edge regions, with far fewer panels than existing low-order panel methods.     

Water vapor in the atmosphere over the northern Tien Shan

Refined data of systematic measurements of total water vapor in the atmosphere from May 1980 to April 2005 are presented. The data were obtained at the Issyk Kul atmospheric-monitoring station by the method of solar molecular-absorption spectroscopy. Over 25 years, the annual mean water-vapor content in the atmosphere increased by 4.5% at a mean rate of increase of 0.18% per year. However, the water-vapor content decreased in the last five years. The results of statistical processing of experimental data (general statistical characteristics, correlation coefficients, composite oscillations) are described. A refined model is proposed for forecasts of temporal variations in the monthly mean and annual mean water-vapor contents for the coming years. The model includes a linear trend and the sum of oscillations with periods close to the periods of a number of well-known geophysical phenomena. Regression equations are proposed to relate the water-vapor content in the atmospheric column to the surface temperature and absolute humidity.     

Bacterial killing by Mytilus hemocyte monolayers as a model for investigating the signaling pathways involved in mussel immune defence

The signaling pathways involved in mussel immune defence were investigated utilizing a model of killing of Escherichia coli by Mytilus galloprovincialis hemocytes in a co-culture setting. In particular, the role played by different mitogen activated protein kinases (MAPKs) and by the production of eicosanoids were investigated utilising specific cell permeant, pharmacological enzyme inhibitors. Hemocyte pretreatment with the p38 MAPK inhibitor SB203580 significantly reduced bacterial killing, whereas PD98059 (an inhibitor of ERK--extracellularly regulated kinase--MAPK activation) had no significant effect. Wortmannin also inhibited bacterial killing, indicating a crucial role for PI3-kinase activation in the immune response. Killing of E. coli was also reduced by inhibitors of both PLA2 and cyclooxygenase activities, indicating that eicosanoid production is involved in mediating the response to bacterial challenge. The results demonstrate that bacterial killing by mussel hemocytes is particularly sensitive to inhibitors of the key steps involved in the transduction of bacterial signals into the host cell. Moreover, these data indicate that the hemocyte bactericidal activity can be suitably utilized not only for identifying the signaling pathways involved in the response to bacterial infection, but also as a potential investigative-toxicology model to test drugs and contaminants for their effect on the overall mussel immune defence.     

Late-Quaternary supply of terrigenous organic matter to the Congo deep-sea fan (ODP site 1075): implications for equatorial African paleoclimate

Late-Quaternary sections (about 1 Ma) from the Congo deep-sea fan (ODP Leg 175, site 1075) were used to reconstruct the terrigenous organic matter supply to the easternmost equatorial Atlantic Ocean. Variations in quantity and quality of the riverine organic matter reflect the interaction between the paleoclimatic development within the continental catchment area and the paleoceanographic conditions in the Congo river plume. To characterize the delivery of organic matter from terrigenous and marine sources, we used elemental and bulk carbon isotopic analyses, Rock-Eval pyrolysis, lignin chemistry, and organic petrology. High-amplitude fluctuations occurring about every 15-25 ka reveal a mainly precessional control on organic sedimentation. Results from Rock-Eval pyrolysis indicate a mixed kerogen type III/II, as would be anticipated in front of a major river. Fluctuations in T_max from Rock-Eval pyrolysis demonstrate pronounced cyclic changes in the delivery of low- and high-mature organic matter. Contribution of the low-mature organic fraction was strongest during warm climates supporting enhanced marine production offshore of the Congo. Organic petrological observations confirm the existence of abundant terrigenous plant tissues, both non-oxidized (vitrinite) and oxidized (inertinite). Charcoal-like organic matter (fusinite) is attributed to periods of increased bush fires in the continental hinterland, and implies more arid climatic conditions. Results from ratios of specific phenolic lignin components suggest that terrigenous organic matter in Late-Quaternary sections of site 1075 mainly derives from non-woody angiosperm tissue, i.e., grasses and leaves. Correlation between the amount of specific lignin phenols and the bulk '¹³C_org signature fosters the conclusion that an appreciable amount of the terrigenous organic fraction derives from C4 plant matter. This may cause an underestimation of the terrigenous proportion of bulk organic matter when assessments are based on bulk carbon isotopic signatures alone.     

Local buckling strength of ring stiffened cylindrical shells under external pressure

The paper presents a non-linear buckling analysis of ring stiffened cylindrical shells subject to external pressure. The collapse pressure is calculated by assuming failure to occur when the material reaches a plastic stress state defined by the Ilyushin criterion. It is shown in the paper that use of the non-linear theory can reduce the estimated first yield by up to 25% in comparison to the linear buckling analysis used up to now. Comparison of predicted failure loads are in good agreement with the lower bound of test results.     

A literature review of the saturation state of seawater with respect to calcium carbonate and its possible significance for scale formation on OTEC heat exchangers

An investigation has been made of available data on the saturation state of seawater with respect to calcium carbonate and its possible significance for scale formation on Ocean Thermal Energy Conversion (OTEC) heat exchangers. Pertinent oceanographic data is lacking at or near potential OTEC sites for the calculation of the degree of saturation of seawater with respect to calcium carbonate. Consequently, only “extrapolated” saturation values can be used. These indicate that near surface seawater is probably supersaturated, with respect to the calcium carbonate phases calcite and aragonite, at all potential OTEC sites. The deep seawater that would be brought to the surface at the potential Atlantic Ocean sites is also likely to be supersaturated with respect to calcium carbonate. The deep seawater at the potential Pacific Ocean sites may be slightly undersaturated.The fact that OTEC heat exchangers will be operating in seawater, which is supersaturated with respect to calcium carbonate, means that if nucleation of calcite or aragonite occurs on the heat exchanger surfaces, significant growth rates of calcium carbonate scale may be expected. The potential for calcium carbonate nucleation is highest at cathodic metal surface locations, which are produced as the result of aluminum corrosion in seawater. Consequently, corrosion and scale formation may be closely related. What the possible effects of biofouling may be on this process are not known.     

Acoustic reflectors in the surface layers of deep sea sediments

Using ultrasonic scanning it is possible to display the position of an acoustic discontinuity within a sediment core and the amplitude of the reflected signal which results from it. From these results it has been possible to examine the effect of variations in the geotechnical properties on the reflection of compressional waves at normal incidence within the core at a frequency of 100 kHz. The occurrence of acoustic reflectors in the surface layers of North Atlantic sediments has also been examined.Two ultrasonic scanning systems for the non-destructive testing of marine sediment cores have been developed. The performance of the two systems has been evaluated using the results from measurements made on a suite of marine sediment cores from the North Atlantic in conjunction with X-ray scanning and geological analysis of the same cores.     

Chlorinated hydrocarbons in seawater: Analytical method and levels in the northeastern Pacific

A method is described for analyzing nanogram quantities of chlorinated hydrocarbons from 1-1 samples of seawater. Seawater samples are pumped through a copper column containing a mixture by weight of 5% activated carbon powder, 10% MgO and 85% refined diatomaceous earth. The chlorinated hydrocarbons in the seawater are adsorbed or trapped on the column and subsequently eluted with 30% benzene in acetone (v/v) for analysis by gas-liquid chromatography.This procedure was used to analyze chlorinated hydrocarbon levels in samples collected off the southern California coast. We suggest that anthropogenic chlorinated hydrocarbons can be used for the investigation of large-scale ocean currents and mixing processes.