A constrained 2D gravity model of the Sebastián Vizcaíno Basin, Baja California Sur, Mexico

The subsurface geometry of the Sebastián Vizcaíno Basin is obtained from the 2D inversion of gravity data, constrained by a density-versus-depth relationship derived from an oil exploration deep hole. The basin accumulated a thick pile of marine sediments that evolved in the fore-arc region of the compressive margin prevalent along western North America during Mesozoic and Tertiary times. Our interpretation indicates that the sedimentary infill in the Sebastián Vizcaíno Basin reaches a maximum thickness of about 4 km at the centre of a relatively symmetric basin. At the location of the Suaro-1 hole, the depth to the basement derived from this work agrees with the drilled interface between calcareous and volcaniclastic members of the Alisitos Formation. A sensitivity analysis strongly suggests that the assumed density function leads to a nearly unique solution of the inverse problem.     

Computation of response spectra from mining tremors using neural networks

Underground coal and copper ore exploitation in two Polish mining regions causes mining tremors and a series of other negative phenomena in the environment. Although these tremors are strictly connected with human activity, they differ considerably from other paraseismic vibrations. The moment of their occurrence is not to be foreseen likewise for earthquakes. The main problem discussed in the paper was formulated as the neural network evaluation of a relation between mining tremor energies, epicentral distances and acceleration response spectra. Back-propagation neural networks with Resilient back-propagation learning method were used. Each input vector included information about the mining tremor energy and the epicentral distance. Values of acceleration response spectrum were expected as the outputs of neural networks. Neurally evaluated spectra were compared with spectra computed on the basis of experimental data. After the network is trained and tested, it can be used for mapping of new data of mining tremor energies and epicentral distances into the spectra. Then, what is the substantial advantage of neural approach, the prediction of acceleration response spectra can be performed without recording of surface vibrations. In the light of the results, it is visible that the presented way of computation of acceleration response spectra can be peculiarly applied to prognosis of mining tremors influences on structures.     

Structural and geotechnical impacts of surface rupture on highway structures during recent earthquakes in Turkey

The most significant damage on highway bridges during the recent earthquakes in Turkey (Kocaeli and Duzce earthquakes) and Taiwan (Chi–Chi earthquake) was the result of fault ruptures traversing transportation infrastructure. This phenomenon and its consequences accentuate the need to examine surface rupture hazards and to identify those areas at risk. This understanding can help to develop remedial measures for both structural and geotechnical engineering. For that purpose, damage to highway bridges during the recent events was reviewed. The total collapse of the highway overpass in Arifiye, during the Kocaeli earthquake, was investigated. The major problems under consideration (in Arifiye) were: (i) dislodging of the bridge spans, and consequently, the total separation of the reinforced concrete girders from the piers; and (ii) the stability of a mechanically stabilized earth wall (MSEW) system under extreme loading conditions. The results of the structural and geotechnical investigations presented herein can be taken in consideration to improve transportation infrastructure against surface rupture hazards.     

The International GPS Service tracking network: Enabling diverse studies and projects through international cooperation

The International GPS Service (IGS), formulated beginning in 1989 and formalized in 1994, was founded on the collaborative operation of approximately 30 permanent GPS stations to benefit global geodynamics. The same cooperative principles, today applied to a network of over 300 stations, still serve to maximize global benefit without unnecessary duplication of investment in global infrastructure. The scope of applications of the dataset has grown to include atmospheric, oceanographic, subdaily, and low-earth orbiter activities through working groups and pilot projects fostered within the IGS in the now traditional IGS spirit of collaboration. These activities and the IGS infrastructure are viewed as critical elements to the Global Geodetic Observing System. This presentation will review the present nature of the IGS tracking network and its ability to support new applications.     

Potential toxicity of resuspended particulate matter and sediments: Environmental samples from the Bay of Banyuls-sur-Mer and Thermaikos Gulf

This contribution attempts to determine whether, and to what degree, environmental samples of resuspended particulate matter and sediments exert a toxicological impact. Further, an attempt is made also to screen the toxic level of potentially hazardous sites, based upon established sediment toxicity criteria. Therefore, a rapid, cost-effective and highly sensitive biotest (bioluminescence assay, based upon marine bacteria) has been applied on: biological fluid extracts; bottom sediments; and sediment trap samples. Samples were taken either from the Bay of Banyuls-sur-Mer (northwestern Mediterranean, France) or Thermaikos Gulf (northeastern Mediterranean, Greece). Biological fluid extracts and sediment trap samples corresponded to periods of resuspension events, or preceding and following such events.The results have revealed that the sampling strategy and biotest implemented in this study might be a useful tool for screening the toxicity of resuspended matter and sediments. Resuspension events appear to be able to exert an influence on the chemical forms of the micro-pollutants; thus on their bioavailability and toxicity. Nevertheless, based upon chemical analysis combined with the bioassay, the toxic level of the sediment samples could be determined, with the level at potentially hazardous sites being characterised.     

Image processing of 2D resistivity data for imaging faults

A methodology to locate automatically limits or boundaries between different geological bodies in 2D electrical tomography is proposed, using a crest line extraction process in gradient images. This method is applied on several synthetic models and on field data set acquired on three experimental sites during the European project PALEOSIS where trenches were dug. The results presented in this work are valid for electrical tomographies data collected with a Wenner-alpha array and computed with an l₁ norm (blocky inversion) as optimization method. For the synthetic cases, three geometric contexts are modelled: a vertical and a dipping fault juxtaposing two different geological formations and a step-like structure. A superficial layer can cover each geological structure. In these three situations, the method locates the synthetic faults and layer boundaries, and determines fault displacement but with several limitations. The estimated fault positions correlate exactly with the synthetic ones if a conductive (or no superficial) layer overlies the studied structure. When a resistive layer with a thickness of 6 m covers the model, faults are positioned with a maximum error of 1 m. Moreover, when a resistive and/or a thick top layer is present, the resolution significantly decreases for the fault displacement estimation (error up to 150%). The tests with the synthetic models for surveys using the Wenner-alpha array indicate that the proposed methodology is best suited to vertical and horizontal contacts. Application of the methodology to real data sets shows that a lateral resistivity contrast of 1:5–1:10 leads to exact faults location. A fault contact with a resistivity contrast of 1:0.75 and overlaid by a resistive layer with a thickness of 1 m gives an error location ranging from 1 to 3 m. Moreover, no result is obtained for a contact with very low contrasts (1:0.85) overlaid by a resistive soil. The method shows poor results when vertical gradients are greater than horizontal ones. This kind of image processing technique should be systematically used for improving the objectiveness of tomography interpretation when looking for limits between geological objects.     

Variation of the plasma turbulence in the central plasma sheet during substorm phases observed by the interball/tail satellite

Fluctuations of the plasma bulk velocity across the plasma sheet are studied using single-point measurements from the Corall instrument on board the Interball/Tail satellite. Several hour-long intervals of continuous data corresponding to quiet geomagnetic conditions and different phases of isolated substorms are analyzed. The plasma sheet flow appears to be strongly turbulent, i.e. dominated by fluctuations that are unpredictable. Corresponding eddy diffusion coefficients were obtained as a function of the autocorrelation time and rms velocity of the fluctuations. It was found that the amplitude of the turbulence and the values of eddy-diffusion coefficients increase significantly during substorm growth and expansion phases and they decrease to their initial level during the recovery phase. We also studied a relationship between the eddy-diffusion coefficients and the absolute value of the geomagnetic field, also measured by the Interball/Tail satellite. It was found that this relationship varies depending on the phase of substorm, indicating possible change in the turbulence regimen with substorm phase.