Seasonally Hypersaline Estuaries in Mediterranean-climate Regions

Data collected in three Californian estuaries indicate that hypersaline conditions exist during the dry summers typical of a Mediterranean climate. The generalised seasonal and longitudinal hydrographic structures are described and explained. It is argued that this seasonal hypersalinity is common and that it represents a major class of estuaries. The observed accumulation of salt indicates surprisingly long residence times in small basins which have free exchange with the ocean. This semi-isolation of the inner basin leads to a large build-up or severe depletion of nutrients, pollutants and plankton in these systems. Of concern are the trends to increase pollutant loading in the same systems that are experiencing an increase in residence times owing to freshwater extraction in the watershed.     

Sensitivity to stress of the estuarine bivalve Macoma balthica from areas between the Netherlands and its southern limits (Gironde)

Variation in the sensitivity to stress of Macoma balthica was measured in several French and Dutch estuaries. For adult and juvenile Macoma balthica exposed to copper under conditions of starvation, differences in mortality rate, condition, glycogen, burrowing rate and copper content were assessed. No significant differences were observed between adults and juveniles; the influence of treatment and origin was always evident. Animals from the most southern estuaries, Loire and Gironde, near to the species's southern limit of distribution, showed, in the field, the strongest deviations for the ecophysiological traits measured, and were in the experiments the most sensitive to stress.     

Morphodynamics of a bar-trough surf zone

A field study was made of the distinguishing morphodynamic processes operating in a surf zone which perennially exhibits accentuated bar-trough topography (the “longshore-bar-trough” and “rhytmic-bar-and-beach” states as described by Wright and Short, 1984). Characteristic features of the morphology include a shallow bar with a steep shoreward face, a deep trough, and a steep beach face. This morphology, which is favored by moderate breaker heights and small tidal ranges, strongly controls the coupled suite of hydrodynamic processes. In contrast to fully dissipative surf zones, the bar-trough surf zone is not at all saturated and oscillations at incident wave frequency remain dominant from the break point to the subaerial beach. The degree of incident wave groupiness does not change appreciably across the surf zone. Infragravity standing waves which, in dissipative surf zones, dominate the inshore energy, remain energetically secondary and occur at higher frequencies in the bar trough surf zone. Analyses of the field data combined with numerical simulations of leaky mode and edge wave nodal—antinodal positions over observed surf-zone profiles, indicate that the frequencies which prevail are favored by the resonant condition of antinodes over the bar and nodes in the trough. Standing waves which would have nodes over the bar are suppressed. Sediment resuspension in the surf zone appears to be largely attributable to the incident waves which are the main source of bed shear stress. In addition, the extra near-bottom eddy viscosity provided by the reformed, non-breaking waves traversing the trough significantly affects the vertical velocity profile of the longshore current. Whereas the bar is highly mobile in terms of onshore—offshore migration rates, the beach face and inner regions of the trough are remarkably stable over time.     

Cd, Pb, Cu, Ni and Co distribution in the German Bight

Cd, Pb and Cu concentrations, dissolved and total, have been determined in the German Bight. In 1975, 1977, 1978, 1980 and 1983 water samples were collected at 215 sampling stations. In the 1983 mission samples were also analysed for Ni and Co. The samples were filtered and acidified immediately after collection. Analysis was performed by voltammetry.The analytical data indicate that a net portion of the Cd, the Weser being a distinct source for it, will cross the estuarine zone. Open sea Cd levels in the German Bight are about a factor 10 higher than North Atlantic values. Pb, being transported mainly with the suspended particulate phase (up to 99.5%), is better eliminated by sedimentation in the estuaries. Ni and Cu occur mainly in the dissolved phase. Pollution by Co is distinct in the Elbe, but the output is rapidly diluted to background contents below 10 ng kg⁻¹. An interpretation of the results from the different years yields a rather steady state situation in the German Bight.     

Mixed-function oxygenases as biological monitors around petroleum hydrocarbon development sites: Potential for induction by diesel and other drilling mud base oils containing reduced levels of polycyclic aromatic hydrocarbons

The use of oil-based drilling muds has been discouraged in hydrocarbon exploration and production in the marine environment but these muds are presently being used to a considerable degree in the United Kingdom and Norwegian sectors of the North Sea. Field studies in the North Sea have demonstrated only localized impacts around individual drilling sites,^1,2 even including those sites where ‘toxic’ diesel oils were employed as base fluids in drilling muds. Yet the question of disposal of cuttings contaminated with oil from drilling muds remains somewhat controversial. The induction of mixed-function oxygenases (MFO) has been validated on a number of occasions in the field as a sensitive index of low level hydrocarbon exposure (reviewed by Payne),³ including sites in the North Sea where diesel-based muds were used.⁴ The present study demonstrates that any potential for induction by hydrocarbon contaminated cuttings will probably be reduced by substitution of low-aromatic base oils for diesel in drilling mud formulations.     

The effect of currents on the generation of internal waves by a barotropic tide near an underwater ridge

In the frame of the linear theory for long waves, the paper studies long waves generated by a barotropic tide running at an arbitrary angle over a bottom ridge. The ocean is assumed to be two-layered. In the area of a ridge with a rectangular cross section, geostrophic flows are considered, coupled with the inclinations of the free surface and interface. Wave amplitudes are shown to depend on the angle of an onrunning tide and this allows us to reach a conclusion about the influence of a geostrophic current on the generation of internal waves. Translated by Vladimir A. Puchkin.     

The distribution of tritium and CFCs in the Weddell Sea during the mid-1980s

Transient tracer data (tritium, CFC11 and CFC12) from the southern, central and northwestern Weddell Sea collected during Polarstern cruises ANT III-3, ANT V-2/3/4 and during Andenes cruise NARE 85 are presented and discussed in the context of hydrographic observations. A kinematic, time-dependent, multi-box model is used to estimate mean residence times and formation rates of several water masses observed in the Weddell Sea.Ice Shelf Water is marked by higher tritium and lower CFC concentrations compared to surface waters. The tracer signature of Ice Shelf Water can only be explained by assuming that its source water mass, Western Shelf Water, has characteristics different from those of surface waters. Using the transient nature of tritium and the CFCs, the mean residence time of Western Shelf Water on the shelf is estimated to be approximately 5 years. Ice Shelf Water is renewed on a time scale of about 14 years from Western Shelf Water by interaction of this water mass with glacial ice underneath the Filchner-Ronne Ice shelf. The Ice Shelf Water signature can be traced across the sill of the Filchner Depression and down the continental slope of the southern Weddell Sea. On the continental slope, new Weddell Sea Bottom Water is formed by entrainment of Weddell Deep Water and Weddell Sea Deep Water into the Ice Shelf Water plume. In the northwestern Weddell Sea, new Weddell Sea Bottom Water is observed in two narrow, deep boundary currents flowing along the base of the continental slope. Classically defined Weddell Sea Bottom Water (θ ≤ −0.7°C) and Weddell Sea Deep Water (−0.7°C ≤ θ ≤ 0°C) are ventilated from the deeper of these boundary currents by lateral spreading and mixing. Model-based estimates yield a total formation rate of 3.5Sv for new Weddell Sea Bottom Water (θ = −1.0°C) and a formation rate of at least 11Sv for Antarctic Bottom Water (θ = −0.5°C).     

On the sulphur chemistry of a super-anoxic fjord, Framvaren, South Norway

The concentrations of total carbonate (C_t), sulphate, sulphide, thiols and oxygen, the ratio between the stable sulphur isotopes ³⁴S and ³²S in sulphate and sulphide, and the density (used to calculate salinity) were determined on samples from the water column of Framvaren, a superanoxic fjord in southern Norway. From a depth of 18m (the oxic-anoxic boundary) the initial sulphate concentration, ([SO₄]_init), as calculated from salinity, is significantly higher than the sum of the measured sulphur species. This is attributed to a loss of sulphur from the water column. The amount of total carbonate produced, corrected for the initial concentration (C_t - 2.4 Sal/35) is found to be proportional to the amount of sulphate consumed, ([SO₄]_init - [SO₄]), according to the following relation C_t- 2.4 Sal/35 = 1.84 ([SO₄]_init - [SO₄]). Isotopic fractionation caused by bacterial sulphate reduction in the anoxic part of the water column produces sulphide with a δ³⁴S 40‰ lower than the δ³⁴S for sulphate at corresponding depths. The isotopic fractionation also results in δ³⁴S value for the remaining sulphate at depths below 80 m being considerably higher than the mean value for ocean water, which is close to + 20‰. The δ³⁴S values for sulphate at depths between 10 and 50 m were lower than + 20‰ which indicates oxidation of sulphide, which follows upon diffusion of sulphide from deeper parts of the water column and inflow of oxygenated seawater over the sill into the anoxic water of the fjord. A conclusive scenario of the Framvaren sulphur chemistry is presented.     

The behaviour of a Cu(II) ion selective electrode in seawater; copper consumption capacity and copper determinations

Determinations of copper consumption capacity (CuCs.C) and labile copper concentrations in surface coastal seawater, using a copper ion selective electrode (Cu-ISE) potentiometric method under predominantly diffusive conditions, are reported. For evaluation of the copper concentrations, the points of the endpoint contiguity zone of the CuCs.C titration curve were treated by an ISE multiple standard addition technique. The results were compared with those obtained by means of a Chelex-100 (calcic form) ‘batch’ procedure-potentiometric stripping analysis.The labile copper of the sample was determined at concentrations down to 10.70 nM with an average RSD of 12%, independent of the Cu-ISE employed. For adjacent subsamples, the mean CuCs.C values obtained for El Way seawater were equivalent to 81.05 and 48.00 nM copper, with an RSD of 4 and 7%, and for Isla Santa Maria seawater the value was equivalent to 70.27 nM copper, with an RSD of 7%. The theoretical approach of the electrode diffusive mechanism proposed, which would depend, fundamentally, on the adsorptive, complexing and reducing properties of the dissolved organic matter in the seawater sample, allows simultaneous analytical determination of CuCs.C and labile copper concentration in seawater.