Hyperpycnal-fed turbidite lobe architecture and recent sedimentary processes: A case study from the Al Batha turbidite system, Oman margin

The main sediment depocenter along the Oman margin is the Al Batha turbidite system that develops in the Gulf of Oman basin. It is directly connected to the wadi Al Batha, and forms a typical sand and mud rich point source system that acts as regional sediment conduit and feeds a ~ 1000 km² sandy lobe.The Al Batha lobe depositional architecture has been investigated in detail using very high-resolution seismic, multibeam echosounder data and sediment cores. Several scales of depositional architecture can be observed. The Al Batha lobe is composed of several depositional units, made of stacked elementary sediment bodies (thinner than 5 m) that are each related to a single flow event. The lobe is connected to the feeder system through a channel-lobe transition zone (CLTZ) that extends on more than 25 km. The lobe can be divided into proximal, middle and distal lobe areas. The proximal lobe is an area of erosion and by-pass with small axial feeder channels that rapidly splay into several small distributaries. They disappear in the mid-lobe area where deposits consist of vertically stacked tabular to lens-shaped sediment bodies, with a lateral continuity that can exceed 10 km. The distal lobe fringe shows a classical facies transition towards thin-bedded basin plain deposits.Sub-surface deposits consist of sandy turbidites and hyperpycnites, interbedded with fine-grained deposits (thin turbidites, hyperpycnites, or hemipelagites). Although these distal deposits are mainly related to flow transformations and concentration evolution, they highlight the importance of flooding of the wadi Al Batha on the sediment transfer to the deep basin. The thick sandy hyperpycnites recovered in such a distal area are also possibly related to the initial properties of gravity flows, in relation to the flooding characteristics of mountainous desert streams.Finally, the Al Batha lobe depositional architecture is typical of sand-rich lobes found within “small”, sand and mud rich turbidite systems fed by mountainous “dirty” rivers. Turbidite sedimentation in the Al Batha system appears to be primarily controlled by the strong climatic and geomorphic forcing parameters (i.e. semi-arid environment with ephemeral, mountainous rivers subjected to flash-flooding).     

Deep sea in situ excess pore pressure and sediment deformation off NW Sumatra and its relation with the December 26, 2004 Great Sumatra-Andaman Earthquake

The swath bathymetric data acquired during the “Sumatra Aftershocks” cruise from the Sunda trench in the Indian Ocean to the north of the Sumatra Island imaged several scars and deposits. In situ pore pressure measurements using the Ifremer piezometer and coring demonstrate that high excess pore pressure and sediment deformation was generated by a recent event in the scar of the slope failure zone identified by J.T. Henstock and co-authors. This excess pore pressure is localized in the upper sedimentary layers and is not related to an interplate subduction process. Numerical simulations of the hydrological system that take into account the hydro-mechanical properties of the upper sediment layer show that the excess pore pressure and sediment deformations could be generated at the time of the December 26, 2004 Great Sumatra Earthquake. The Sumatra Aftershocks team: J.-C. Sibuet, S. Singh, R. Apprioual, N.C. Aryanto, J. Begot, A. Cattaneo, A.P.S. Chauchan, R. Creach, J. Crozon, A. Domzig, N. Falleau, D. Graindorge, F. Harmegnies, Y. Haryadi, F. Klingelhoffer, S.K. Kolluru, J.-Y. Landuré, C. Le Lann, J. Malod, A. Normand, G. Oggian, C. Rangin, D. Restunin Galih, J.-L. Schneider, N. Sultan, M. Taufik, M. Umber and H. Yamaguchi.     

Comparison of gas with liquid chromatography for the determination of benzenepolycarboxylic acids as molecular tracers of black carbon

Existing methods for black carbon (BC) quantification measure different parts of the BC continuum, which complicates the calculation of a global BC budget. Benzenepolycarboxylic acids (BPCA) are used as molecular markers to quantify and characterize BC in soils and sediments using gas chromatography for BPCA separation (GC-BPCA). Recently, this method was refined for BC analysis in seawater using high performance liquid chromatography (LC-BPCA), which omits the cleaning steps and derivatization necessary in GC analysis. As yet it is not clear whether the two analytical methods yield similar results. Here we apply both methods to a suite of laboratory produced charcoals derived from wood and grass. We found systematically lower total BPCA-C contents and larger analytical variability for all tested charcoals when using GC-BPCA compared to LC-BPCA, the latter giving 1.5 ± 0.3 times higher yields for the charcoal samples formed at 275-700 °C. At lower and higher pyrolysis temperatures the differences between the two analytical methods were larger. The main reason for the differences between the two methods is the loss of BPCA during sample preparation for GC analysis. We propose a correction factor of 1.5 to account for at least part of these losses. No qualitative biases, i.e. towards more or less functionalized BPCAs, were observed between the two methods. The relative contribution of mellitic acid C to total BPCA-C, a measure for the degree of condensation of BC, was the same in the two analytical techniques. Qualitative differences between wood and grass charcoals as detected by both methods were small.     

How weather impacts the forced climate response

The new interactive ensemble modeling strategy is used to diagnose how noise due to internal atmospheric dynamics impacts the forced climate response during the twentieth century (i.e., 1870?C1999). The interactive ensemble uses multiple realizations of the atmospheric component model coupled to a single realization of the land, ocean and ice component models in order to reduce the noise due to internal atmospheric dynamics in the flux exchange at the interface of the component models. A control ensemble of so-called climate of the twentieth century simulations of the Community Climate Simulation Model version 3 (CCSM3) are compared with a similar simulation with the interactive ensemble version of CCSM3. Despite substantial differences in the overall mean climate, the global mean trends in surface temperature, 500?mb geopotential and precipitation are largely indistinguishable between the control ensemble and the interactive ensemble. Large differences in the forced response; however, are detected particularly in the surface temperature of the North Atlantic. Associated with the forced North Atlantic surface temperature differences are local differences in the forced precipitation and a substantial remote rainfall response in the deep tropical Pacific. We also introduce a simple variance analysis to separately compare the variance due to noise and the forced response. We find that the noise variance is decreased when external forcing is included. In terms of the forced variance, we find that the interactive ensemble increases this variance relative to the control.     

Development of a modelling methodology for simulation of long-term morphological evolution of the southern Baltic coast

The Darss–Zingst peninsula at the southern Baltic Sea is a typical wave-dominated barrier island system which includes an outer barrier island and an inner lagoon. The formation of the Darss–Zingst peninsula dates back to the Littorina Transgression onset about 8,000 cal BP. It originated from several discrete islands, has been reshaped by littoral currents, wind-induced waves during the last 8,000 years and evolved into a complex barrier island system as today; thus, it may serve as an example to study the coastal evolution under long-term climate change. A methodology for developing a long-term (decadal-to-centennial) process-based morphodynamic model for the southern Baltic coastal environment is presented here. The methodology consists of two main components: (1) a preliminary analysis of the key processes driving the morphological evolution of the study area based on statistical analysis of meteorological data and sensitivity studies; (2) a multi-scale high-resolution process-based model. The process-based model is structured into eight main modules. The two-dimensional vertically integrated circulation module, the wave module, the bottom boundary layer module, the sediment transport module, the cliff erosion module and the nearshore storm module are real-time calculation modules which aim at solving the short-term processes. A bathymetry update module and a long-term control function set, in which the ‘reduction’ concepts and technique for morphological update acceleration are implemented, are integrated to up-scale the effects of short-term processes to a decadal-to-centennial scale. A series of multi-scale modelling strategies are implemented in the application of the model to the research area. Successful hindcast of the coastline change of the Darss–Zingst peninsula for the last 300 years validates the modelling methodology. Model results indicate that the coastline change of the Darss–Zingst peninsula is dominated by mechanisms acting on different time scales. The coastlines of Darss and the island of Hiddensee are mainly reshaped by long-term effects of waves and longshore currents, while the coastline change of the Zingst peninsula is due to a combination of long-term effects of waves and short-term effects caused by wind storms.     

An estimate of late Pleistocene geomagnetic intensity variation from Sulu Sea sediments

Sediments from Site 769 of the Ocean Drilling Program's Leg 124 provide a record of geomagnetic intensity variation over the past 110 ky. Using continous shipboard measurements exclusively, I estimate the variation in the geomagnetic field strength by employing low-field magnetic susceptibility as a normalization parameter for the measured remanence intensity. By calibrating the resultant relative paleointensity record against previously available Holocene age estimates of absolute paleointensity, I derive an estimate of virtual dipole moment since 110 ka. The record obtained from these Sulu Sea sediments is strikingly like that previously obtained from sediments of a similar age in the Mediterranean Basin with distinct intervals of low intensity near 15, 20, 40 and 65–70 ka. The Sulu sediments also indicate a low-intensity feature near 108 ka. Important differences in paleointensity estimates obtained from these different regions for the interval between 30 and 20 ka suggest that a relatively large non-dipolar component of the geomagnetic field might have been present at that time.     

GPCC's new land surface precipitation climatology based on quality-controlled in situ data and its role in quantifying the global water cycle

In 1989, the need for reliable gridded land surface precipitation data sets, in view of the large uncertainties in the assessment of the global energy and water cycle, has led to the establishment of the Global Precipitation Climatology Centre (GPCC) at Deutscher Wetterdienst on invitation of the WMO. The GPCC has calculated a precipitation climatology for the global land areas for the target period 1951–2000 by objective analysis of climatological normals of about 67,200 rain gauge stations from its data base. GPCC's new precipitation climatology is compared to several other station-based precipitation climatologies as well as to precipitation climatologies derived from the GPCP V2.2 data set and from ECMWF's model reanalyses ERA-40 and ERA-Interim. Finally, how GPCC's best estimate for terrestrial mean precipitation derived from the precipitation climatology of 786 mm per year (equivalent to a water transport of 117,000 km³) is fitting into the global water cycle context is discussed.     

A review on missing hydrological data processing

Like almost all fields of science, hydrology has benefited to a large extent from the tremendous improvements in scientific instruments that are able to collect long-time data series and an increase in available computational power and storage capabilities over the last decades. Many model applications and statistical analyses (e.g., extreme value analysis) are based on these time series. Consequently, the quality and the completeness of these time series are essential. Preprocessing of raw data sets by filling data gaps is thus a necessary procedure. Several interpolation techniques with different complexity are available ranging from rather simple to extremely challenging approaches. In this paper, various imputation methods available to the hydrological researchers are reviewed with regard to their suitability for filling gaps in the context of solving hydrological questions. The methodological approaches include arithmetic mean imputation, principal component analysis, regression-based methods and multiple imputation methods. In particular, autoregressive conditional heteroscedasticity (ARCH) models which originate from finance and econometrics will be discussed regarding their applicability to data series characterized by non-constant volatility and heteroscedasticity in hydrological contexts. The review shows that methodological advances driven by other fields of research bear relevance for a more intensive use of these methods in hydrology. Up to now, the hydrological community has paid little attention to the imputation ability of time series models in general and ARCH models in particular.