Timing and pace of ice-sheet withdrawal across the marine–terrestrial transition west of Ireland during the last glaciation

Understanding the pace and drivers of marine-based ice-sheet retreat relies upon the integration of numerical ice-sheet models with observations from contemporary polar ice sheets and well-constrained palaeo-glaciological reconstructions. This paper provides a reconstruction of the retreat of the last British–Irish Ice Sheet (BIIS) from the Atlantic shelf west of Ireland during and following the Last Glacial Maximum (LGM). It uses marine-geophysical data and sediment cores dated by radiocarbon, combined with terrestrial cosmogenic nuclide and optically stimulated luminescence dating of onshore ice-marginal landforms, to reconstruct the timing and rate of ice-sheet retreat from the continental shelf and across the adjoining coastline of Ireland, thus including the switch from a marine- to a terrestrially-based ice-sheet margin. Seafloor bathymetric data in the form of moraines and grounding-zone wedges on the continental shelf record an extensive ice sheet west of Ireland during the LGM which advanced to the outer shelf. This interpretation is supported by the presence of dated subglacial tills and overridden glacimarine sediments from across the Porcupine Bank, a westwards extension of the Irish continental shelf. The ice sheet was grounded on the outer shelf at ~26.8 ka cal bp with initial retreat underway by 25.9 ka cal bp. Retreat was not a continuous process but was punctuated by marginal oscillations until ~24.3 ka cal bp. The ice sheet thereafter retreated to the mid-shelf where it formed a large grounding-zone complex at ~23.7 ka cal bp. This retreat occurred in a glacimarine environment. The Aran Islands on the inner continental shelf were ice-free by ~19.5 ka bp and the ice sheet had become largely terrestrially based by 17.3 ka bp. This suggests that the Aran Islands acted to stabilize and slow overall ice-sheet retreat once the BIIS margin had reached the inner shelf. Our results constrain the timing of initial retreat of the BIIS from the outer shelf west of Ireland to the period of minimum global eustatic sea level. Initial retreat was driven, at least in part, by glacio-isostatically induced, high relative sea level. Net rates of ice-sheet retreat across the shelf were slow (62–19 m a⁻¹) and reduced (8 m a⁻¹) as the ice sheet vacated the inner shelf and moved onshore. A picture therefore emerges of an extensive BIIS on the Atlantic shelf west of Ireland, in which early, oscillatory retreat was followed by slow episodic retreat which decelerated further as the ice margin became terrestrially based. More broadly, this demonstrates the importance of localized controls, in particular bed topography, on modulating the retreat of marine-based sectors of ice sheets.     

Can sodium hypochlorite reduce the risk of species introductions from diapausing invertebrate eggs in non-ballasted ships?

Many transoceanic vessels enter the Great Lakes carrying residual ballast water and sediment that harbours live animals and diapausing eggs. In this study, we examine the potential for sodium hypochlorite (NaOCl) to reduce the risk of species introductions from diapausing invertebrate eggs in residual ballast sediment. We collected sediment from three transoceanic vessels and from Lake Erie and exposed them to NaOCl concentrations between 0 and 10,000 mg/L for 24 h. Hatching success was reduced by >89% in all four experiments at 1,000 mg/L relative to unexposed controls. Fewer species hatched at high than at low NaOCl concentrations. Based on an average residual ballast of 46.8 tonnes, the volume of NaOCl required to treat inbound vessels is 374 L. Impacts of NaOCl use could be minimized by neutralization of treated residuals with sodium bisulfite. Further research is needed, however, to evaluate the effect of NaOCl on ballast tank corrosion.     

The fine‐grained matrix of the Semarkona LL3.0 ordinary chondrite: An induced thermoluminescence study

Abstract— To investigate the nature, origin, and history of the fine‐grained matrix in Semarkona and develop techniques suitable for small samples, we have measured the induced thermoluminescence properties of six matrix samples 10 μm to 400 μm in size. The samples had TL sensitivities comparable with 4 mg of bulk samples of type 3.2–3.4 ordinary chondrites, which is very high relative to bulk Semarkona. The other induced TL properties of these samples, TL peak temperatures, and TL peak widths distinguish them from other ordinary chondrite samples where the TL is caused by feldspar. Cathodoluminescence images and other data suggest that the cause of the luminescence in the Semarkona fine‐grained matrix is forsterite. In some respects the matrix TL data resemble that of Semarkona chondrules, in which the phosphor is forsterite and terrestrial forsterites from a variety of igneous and metamorphic environments. However, differences in the TL peak temperature versus TL peak width relationship between the matrix samples and the other forsterites suggest a fundamentally different formation mechanism. We also note that forsterite appears to be a major component in many primitive materials, such as nebulae, cometary dust, and Stardust particles.     

Characterisation of contemporary local climate change in the mountains of southwest Bulgaria

The Pirin Mountains in southwest Bulgaria spatially mark a transition between the Mediterranean and temperate climate zones. Therefore they are also particularly relevant for research on high mountain climate and the effect of landscape transformation. Historical climate records gathered in the area have been researched, checked and statistically examined. The mountainous climate has been characterised and trends in the evolution of temperature and precipitation since 1931 have been outlined. There are objective evidences for an increasing annual mean temperature, longer vegetative periods and local droughts in spring and autumn. Significant changes also appear in climatic threshold values such as the number of frost change days. This last parameter is very important for the sustainability of mountainous ecosystems.     

Diurnal and Seasonal Trends in Convective Mixed-Layer Heights Estimated from Two Years of Continuous Ceilometer Observations in Vancouver,BC

Twenty-six months of continuous ceilometer data are used to estimate the convective mixed-layer height for 710 days by identifying backscatter gradients associated with the entrainment zone. To accomplish this, a semi-automatic procedure is developed that removes all non-applicable data before applying a mixed-layer height algorithm to the backscatter profiles. Two different algorithms for estimating the mixed-layer height are assessed: the minimum-gradient method and the ideal-profile method. The latter of these two algorithms is found to be more robust. Comparisons of mixed-layer height values estimated from the ceilometer agree with previous observations with slightly higher estimates in the mornings and evenings. For clear days with no cumulus cloud formation, the seasonal cycle in mixed-layer heights peaks in late June to early July. Daily maximum values are suppressed by the site’s coastal location, remaining below 800 m for all but a few days. The mean daily maximum mixed-layer height increases by 384 m for days with boundary-layer clouds. The mean summer diurnal trend is found not to differ greatly from that in spring on clear days, while days with boundary-layer clouds have higher spring values than in summer. Net surface heat flux and synoptic stability likely have the largest influence on the mixed-layer heights. Additionally, large intra-monthly variability suggests a strong influence from regional dynamics.     

Fragment properties at the catastrophic disruption threshold: The effect of the parent body’s internal structure

Numerical simulations of asteroid breakups, including both the fragmentation of the parent body and the gravitational interactions between the fragments, have allowed us to reproduce successfully the main properties of asteroid families formed in different regimes of impact energy, starting from a non-porous parent body. In this paper, using the same approach, we concentrate on a single regime of impact energy, the so-called catastrophic threshold usually designated by , which results in the escape of half of the target’s mass. Thanks to our recent implementation of a model of fragmentation of porous materials, we can characterize for both porous and non-porous targets with a wide range of diameters. We can then analyze the potential influence of porosity on the value of , and by computing the gravitational phase of the collision in the gravity regime, we can characterize the collisional outcome in terms of the fragment size and ejection speed distributions, which are the main outcome properties used by collisional models to study the evolutions of the different populations of small bodies. We also check the dependency of on the impact speed of the projectile.In the strength regime, which corresponds to target sizes below a few hundreds of meters, we find that porous targets are more difficult to disrupt than non-porous ones. In the gravity regime, the outcome is controlled purely by gravity and porosity in the case of porous targets. In the case of non-porous targets, the outcome also depends on strength. Indeed, decreasing the strength of non-porous targets make them easier to disrupt in this regime, while increasing the strength of porous targets has much less influence on the value of . Therefore, one cannot say that non-porous targets are systematically easier or more difficult to disrupt than porous ones, as the outcome highly depends on the assumed strength values. In the gravity regime, we also confirm that the process of gravitational reaccumulation is at the origin of the largest remnant’s mass in both cases. We then propose some power-law relationships between and both target’s size and impact speed that can be used in collisional evolution models. The resulting fragment size distributions can also be reasonably fitted by a power-law whose exponent ranges between −2.2 and −2.7 for all target diameters in both cases and independently on the impact velocity (at least in the small range investigated between 3 and 5 km/s). Then, although ejection velocities in the gravity regime tend to be higher from porous targets, they remain on the same order as the ones from non-porous targets.     

An investigation of the presence and nature of phyllosilicates on the surfaces of C asteroids by an analysis of the continuum slopes in their near‐infrared spectra

Abstract– To understand the nature of C asteroid surfaces, which are often related to phyllosilicates and C chondrites, we report near‐infrared spectra for a suite of phyllosilicates, heated to 100–1100 °C in 100 °C intervals, and compare the results for telescope IRTF spectra for 11 C asteroids. As C asteroids have relatively featureless spectra, we focus on “continuum plots” (1.0–1.75 μm slope against 1.8–2.5 μm slope). We compare the continuum plots of the 11 C asteroids and our heated phyllosilicates with literature data for C chondrites. The CI, CR, CK, and CV chondrite meteorites plot in the C asteroid field, whereas CM chondrites plot in a close but discrete field. All are well separated from the large phyllosilicate field. Heating kaolinite and montmorillonite to ≥700 °C moves their continua slopes into the C asteroid field, whereas chlorite and serpentine slopes move into the CM chondrite field. Water losses during heating are generally 10–15 wt% and were associated with a 20–70% albedo drop. Our data are consistent with surfaces of the C asteroids consisting of the dehydration products of montmorillonite whereas the CM chondrites are the dehydration products of serpentine and chlorite. The presence of opaque minerals and evaporites does not provide quantitative explanations for the difference in continua slopes of the phyllosilicates and C asteroids. The CM chondrites can also be linked to the C asteroids by heating. We suggest that the CM chondrites are interior samples, and the presence of a 3 μm feature in C asteroid spectra also indicates the excavation of material.     

Precipitation extremes and the impacts of climate change on stormwater infrastructure in Washington State

The design of stormwater infrastructure is based on an underlying assumption that the probability distribution of precipitation extremes is statistically stationary. This assumption is called into question by climate change, resulting in uncertainty about the future performance of systems constructed under this paradigm. We therefore examined both historical precipitation records and simulations of future rainfall to evaluate past and prospective changes in the probability distributions of precipitation extremes across Washington State. Our historical analyses were based on hourly precipitation records for the time period 1949–2007 from weather stations in and near the state’s three major metropolitan areas: the Puget Sound region, Vancouver (WA), and Spokane. Changes in future precipitation were evaluated using two runs of the Weather Research and Forecast (WRF) regional climate model (RCM) for the time periods 1970–2000 and 2020–2050, dynamically downscaled from the ECHAM5 and CCSM3 global climate models. Bias-corrected and statistically downscaled hourly precipitation sequences were then used as input to the HSPF hydrologic model to simulate streamflow in two urban watersheds in central Puget Sound. Few statistically significant changes were observed in the historical records, with the possible exception of the Puget Sound region. Although RCM simulations generally predict increases in extreme rainfall magnitudes, the range of these projections is too large at present to provide a basis for engineering design, and can only be narrowed through consideration of a larger sample of simulated climate data. Nonetheless, the evidence suggests that drainage infrastructure designed using mid-20th century rainfall records may be subject to a future rainfall regime that differs from current design standards.     

Extended Self-Similarity in Geophysical and Geological Applications

In this paper we demonstrate application of the Extended Self-Similarity (ESS) concept, recently developed in turbulence physics, for geological and geophysical phenomena. The theoretical background is discussed first and then the ESS properties in fluvial turbulence, sand wave dynamics, Martian topography, river morphometry, gravel-bed mobility, and atmospheric barometric pressure are explored. The main attention is paid to fluvial turbulence and sand waves, while other examples are presented to support the generality of the ESS concept in earth sciences. The results show that the ESS properties of the considered phenomena are remarkably similar to those reported for turbulence, in spite of different underlying mechanisms. This suggests that a general rule should exist which governs a wide class of complex natural phenomena.     

Pressure anomalies in the Indian Ocean area, 1796–1960

Summary Barometric anomalies for stations near the Indian Ocean since 1841 are tabulated and combined for years and half-years. Early records for India yield a further series back to 1796. Regional anomalies for the west Indian Ocean correlate inversely with Nile Flood data, and those for the east Indian Ocean inversely with Java tree-rings. Combined values (including Australia), if reversed, correlate well with such rainfall indicators and at the same time provide good indicators of the half-yearly anomalies of the Southern Oscillation and the yearly anomalies of the Pressure Parameter. The Pressure Parameter is an index linked also with tropical temperature changes and with climatic fluctuations in various parts of the world.

---

Zusammenfassung Luftdruckwerte für Orte im Gebiete des Indischen Ozeans seit 1841 wurden zusammengestellt in Tabellen jährlicher und halbjährlicher Anomalien. Frühe Aufzeichnungen in Indien sind erhältlich seit 1796. Regionale Anomalien des Luftdruckes im westlichen Indischen Ozean sind umgekehrt korreliert mit der Nilflut, solche im östlichen Indischen Ozean mit den Jahresringbreiten von Bäumen auf Java. Kombinierte Luftdruckanomalien (Australien eingeschlossen) sind umgekehrt korreliert mit solcherart Indikatoren des Niederschlags und ergeben zur gleichen Zeit gute Anweisungen für die halbjährlichen Anomalien der sogenannten Südlichen Schwankung und der jährlichen Anomalien eines gewissen Luftdruckparameters. Der Luftdruckparameter ist verbunden mit tropischen Temperaturänderungen und klimatischen Schwankungen in verschiedenen Weltteilen.