Diurnal and seasonal variations of radioactivity and electrical conductivity near the surface for a continental location Mysore, India

Simultaneous measurements of the activity concentrations of radon and its progeny, and conductivity of both polarities i.e., positive and negative conductivities, were made at a height of 1 m above the ground at Mysore (12°N, 76°E, 767 m above mean sea level), India. Diurnal and seasonal variations of activities of radon and its progeny show their peak values in the early morning hours throughout the year. Observations show an increase in the concentration of radon and its progeny during nighttime compared to the daytime values, and are higher in winter than in other seasons. The electrical conductivity of the atmosphere that depends on the ionization rate also exhibits similar trends. These results are discussed in terms of ionization rate due to radioactivity and the influence of meteorological parameters on radioactivity. The results also show that the concentrations of radon, its progeny, and the electrical conductivity of both polarities exhibit a positive correlation with the relative humidity and are negatively correlated with the temperature of the atmosphere.     

Structure and evolution of the Cauvery Shear Zone system, Southern Granulite Terrain, India: Evidence from deep seismic and other geophysical studies

The Southern Granulite Terrain with exposed Archean lower crustal rocks is studied using various geophysical tools. The crustal structure derived from seismic reflection and refraction/wide-angle reflection studies is used to understand the tectonic evolution of the region. Deep seismic reflection section along the Kolattur–Palani segment shows an oppositely dipping reflection fabric near the Moyar–Bhavani shear zone, which is interpreted as a signature of collision between the Dharwar craton and another crustal block in the south. The thickened crust due to collision was delaminated during the orogenic collapse and modified the central part, covering the Cauvery Shear Zone system, located between the Moyar–Bhavani and Karur–Oddanchatram shear zones. The delaminated lower crust is altered by magmatic underplating as evidenced by the high velocity layer just above the Moho. The velocity model of the region indicates crustal thickening at the boundary of the Dharwar craton and Moyar–Bhavani shear zone and thinning further south. Back-scattered seismic wave field with negative moveout and the Moho-offset indicate the spatial location and strike-slip nature of the shear zones. Present study suggests that the late Archean collision and suturing of the Dharwar craton with the southern crustal block at the Moyar–Bhavani shear zone may be responsible for the evolution of late Archean granulites. Late Neoproterozoic rifting is observed along the paleo-fault zones. The seismic studies constrained by gravity, magnetic and magnetotelluric data suggest that the Moyar–Bhavani and Karur–Oddanchatram shear zones of the Cauvery Shear Zone system mark terrane boundaries/suture zones.     

Bianchi type V universe with bulk viscous matter and time varying gravitational and cosmological constants

We consider spatially homogeneous and anisotropic Bianchi type V space- time with a bulk viscous fluid source, and time varying gravitational constant G and cosmological term Λ. The coefficient of bulk viscosity ζ is assumed to be a simple linear function of the Hubble parameter H (i.e. ζ = ζ 0 + ζ 1 H , where ζ 0 and ζ 1 are constants). The Einstein field equations are solved explicitly by using a law of variation for the Hubble parameter, which yields a constant value of the deceleration parameter. Physical and kinematical parameters of the models are discussed. The models are found to be compatible with the results of astronomical observations.     

Presence of microporosity in Miocene carbonate platform,Central Luconia,offshore Sarawak,Malaysia

The Luconia Province—offshore Sarawak—is a key hydrocarbon province in Malaysia. However, the gas reservoirs in Central Luconia pose unique problems and challenges as they have partially water-filled microporosity that overprint wireline logs. Microporosity in Central Luconia occurs throughout the Miocene carbonates and is a crucial element that influences fluid flow properties and ultimately the recovery of hydrocarbons. Quantification of macroporosity was achieved using petrographic analysis of thin sections and the FESEM images. The point counting technique was used to estimate the amount of macroporosity from the thin section, which was then subtracted from the total porosity to derive microporosity. The qualitative investigation of the Miocene carbonates indicates the presence of three different types of microporosity namely grain-based microporosity, matrix-based microporosity, and cement-based microporosity. Quantification of microporosity showed that the microporosity varies from sample to sample, ranging from 10 to 60% of the total measured porosity. The depositional texture, mineralogy, and microtexture control this microporosity variation including its abundance and type. The microporosity in Central Luconia is diagenetically controlled based on four major diagenetic mechanisms namely (1) mechanical process/endolithic grains/marine diagenesis; (2) leaching/meteoric diagenesis; (3) cementation/shallow diagenesis; and (4) deeper diagenesis environment.     

Delineating generalized species boundaries from species distribution data and a species distribution model

Species distribution models (SDM) are commonly used to provide information about species ranges or extents, and often are intended to represent the entire area of potential occupancy or suitable habitat in which individuals occur. While SDMs can provide results over various geographic extents, they normally operate within a grid and cannot delimit distinct, smooth boundaries. Additionally, there are instances where a zone of primary occupancy (i.e., a mostly continuous region where species exists, excluding outliers) is better suited for particular analyses, such as when examining source/sink population dynamics or modeling movement into new habitats. We present a semi-automated method to delineate a generalized species boundary (GSB) from SDM output, which provides a practical alternative to digitizing. This preliminary boundary is then manually updated based on inventory data and historical ranges. We used the method to generate contemporary boundaries for 132 tree species of the eastern United States, which are complementary to the ranges generated by Elbert Little for North America during the 1970s, but are not replacements. The methods we present can broadly be applied to other grid-based SDM to generate GSBs.     

Numerical simulation of cyclonic storms FANOOS, NARGIS with assimilation of conventional and satellite observations using 3-DVAR

In this work, the impact of assimilation of conventional and satellite data is studied on the prediction of two cyclonic storms in the Bay of Bengal using the three-dimensional variational data assimilation (3D-VAR) technique. The FANOOS cyclone (December 6?C10, 2005) and the very severe cyclone NARGIS (April 28?CMay 2, 2008) were simulated with a double-nested weather research and forecasting (WRF-ARW) model at a horizontal resolution of 9?km. Three numerical experiments were performed using the WRF model. The back ground error covariance matrix for 3DVAR over the Indian region was generated by running the model for a 30-day period in November 2007. In the control run (CTL), the National Centers for Environmental Prediction (NCEP) global forecast system analysis at 0.5° resolution was used for the initial and boundary conditions. In the second experiment called the VARCON, the conventional surface and upper air observations were used for assimilation. In the third experiment (VARQSCAT), the ocean surface wind vectors from quick scatterometer (QSCAT) were used for assimilation. The CTL and VARCON experiments have produced higher intensity in terms of sea level pressure, winds and vorticity fields but with higher track errors. Assimilation of conventional observations has meager positive impact on the intensity and has led to negative impact on simulated storm tracks. The QSCAT vector winds have given positive impact on the simulations of intensity and track positions of the two storms, the impact is found to be relatively higher for the moderate intense cyclone FANOOS as compared to very severe cyclone NARGIS.     

Role of asymmetry effect on the specific conductivity of water—A case study

Forty-one water samples in each season(both pre-and post-monsoon) were collected from different for-mations of the Kadiri schist belt located in the Anantapur district,Andhra Pradesh.The specific electrical conductiv-ity(EC) of these water samples was measured at 25℃ by using specific conductivity bridge.The specific conductiv-ity values of the water samples were also calculated by multiplying ionic concentrations with conductivity factor.It is found that the observed EC values of all water samples collected in both the seasons are different from the esti-mated EC values because of the electro-chemical properties of ions in water.     

Markov chain model to study the occurrence of pre-monsoon thunderstorms over Bhubaneswar,India

The present work deals with pre-monsoon thunderstorms over Bhubaneswar belonging to the state of Orissa, India. A Markovian approach has been adopted to discern the probabilistic behavior of the time series of the occurrence and non-occurrence of this hazardous weather event by introducing a dichotomy within the time series. After a painstaking analysis through chi-square tests, we have identified serial independence in a few years and first-order two-state Markovian dependence in a few years (2000, 2001, 2004 and 2006). Finally, for the years of first-order two-state Markovian dependence, it has been observed that the probability of occurrence or non-occurrence of thunderstorm gets higher if the state of the previous day is similar to that of the current day. Furthermore, the probability of getting non-thunderstorm day followed by non-thunderstorm day is higher than the probability of getting thunderstorm day followed by thunderstorm day. It has been also observed that the unconditional climatological probability of the occurrence of severe pre-monsoon thunderstorm implied by the Markov chain is closely in agreement with the observed relative frequencies. However, it could be revealed that Markov chain cannot, in general, be suggested as a predictive tool for pre-monsoon thunderstorms under study without investigating the serial dependence inherent in the time series.     

Studies on the variations of heavy metals in the marine sediments off Kalpakkam,East Coast of India

During the last two decades, the coastal environment of southeast India has experienced intense developments in industry, urbanization and aquaculture. Moreover, the 2004 mega tsunami has devastated this coast, thus affecting the coastal sediment characteristics. These two phenomena prompted a study to characterize the sediment, to understand the mechanisms influencing the distribution of heavy metals and to create baseline data for future impact assessment. Results showed that the coastal sediment was carpeted with a mosaic of sand and silty sand with a minor amount of clay. Heavy metal values showed maximum variation for Fe and minimum for Cd. Their average values showed the following decreasing trend: Fe > Cu > Zn > Pb > Cr > Ni > Cd. This study shows that the major source of metals at Kalpakkam coast are land-based anthropogenic ones, such as, discharge from industrial waste, agricultural waste, urban, municipal and slum sewage into the Buckingham canal, which in turn discharges into the sea through backwaters, particularly during northeast monsoon period. A clear signature of the role of backwater discharge increasing the concentration of a few metals in the coastal sediments during monsoon period was observed. Assessments of the degree of pollution, concentration factor (CF), geoaccumulation index (I _geo) and pollution load index (PLI) have been calculated. CF values and I _geo indicated that the coastal sediment is moderately polluted by Cu and Cd. Increase in Cu, Pb and Zn concentration during the monsoon period (October–January) compared to the rest of the year was noticed. Factor analysis and correlation among the heavy metals concluded that Cr, Ni, Cd and Fe are of crustal origin, whereas, Cu, Pb and Zn are from anthropogenic sources. Organic carbon content in the sediment increased during monsoon period, pointing to the role of land runoff and backwater discharge in enhancing its content. The study also elucidates the impact of the recent tsunami in depleting metal content in the coastal sediment as compared to the pre-tsunami period.     

Mineralogy,geochemistry and petrogenesis of the Khopoli mafic intrusion,Deccan Traps,India

The Khopoli intrusion, exposed at the base of the Thakurvadi Formation of the Deccan Traps in the Western Ghats, India, is composed of olivine gabbro with 50–55 % modal olivine, 20–25 % plagioclase, 10–15 % clinopyroxene, 5–10 % low-Ca pyroxene, and <5 % Fe-Ti oxides. It represents a cumulate rock from which trapped interstitial liquid was almost completely expelled. The Khopoli olivine gabbros have high MgO (23.5–26.9 wt.%), Ni (733–883 ppm) and Cr (1,432–1,048 ppm), and low concentrations of incompatible elements including the rare earth elements (REE). The compositions of the most primitive cumulus olivine and clinopyroxene indicate that the parental magma of the Khopoli intrusion was an evolved basaltic melt (Mg# 49–58). Calculated parental melt compositions in equilibrium with clinopyroxene are moderately enriched in the light REE and show many similarities with Deccan tholeiitic basalts of the Bushe, Khandala and Thakurvadi Formations. Nd-Sr isotopic compositions of Khopoli olivine gabbros (εNd_t?=??9.0 to ?12.7; ⁸⁷Sr/⁸⁶Sr?=?0.7088–0.7285) indicate crustal contamination. AFC modelling suggests that the Khopoli olivine gabbros were derived from a Thakurvadi or Khandala-like basaltic melt with variable degrees of crustal contamination. Unlike the commonly alkalic, pre- and post-volcanic intrusions known in the Deccan Traps, the Khopoli intrusion provides a window to the shallow subvolcanic architecture and magmatic processes associated with the main tholeiitic flood basalt sequence. Measured true density values of the Khopoli olivine gabbros are as high as 3.06 g/cm³, and such high-level olivine-rich intrusions in flood basalt provinces can also explain geophysical observations such as high gravity anomalies and high seismic velocity crustal horizons.