Biotite and muscovite <Superscript>40</Superscript>Ar–<Superscript>39</Superscript>Ar geochronological constraints on the post-Svecofennian tectonothermal evolution,Forsmark site,central Sweden

In order to characterize the post-Svecofennian tectonothermal evolution of the Fennoscandian Shield, ⁴⁰Ar–³⁹Ar biotite and some ⁴⁰Ar–³⁹Ar muscovite geochronological data are reported from a total of 30 surface outcrop and 1,000 m long borehole samples at Forsmark, central Sweden. The 13 surface samples were collected across 3 branches of a major WNW to NW trending system of deformation zones, whereas the boreholes were drilled within a tectonic lens, in between two of these zones. The ⁴⁰Ar–³⁹Ar biotite ages indicate that the present erosion surface, in central Sweden, cooled below c. 300°C at 1.73–1.66 Ga, and that the rocks could have accommodated strain in a brittle manner between 1.8 and 1.7 Ga. The variation in surface ages is suggested to be due to fault along the large WNW to NW trending deformation zones, following the establishment of a sub-Cambrian peneplain. The minor variation of ages within a single crustal block may be due to disturbance along ENE to NNE trending fracture zones. Possible cooling paths, derived from ⁴⁰Ar–³⁹Ar hornblende, muscovite and biotite ages, were calculated for the time interval from 1.80 to 1.67 Ga, when the area cooled from c. 500 to 300°C. Cooling rates of 1.9–4°C/m.y. have been attained. Between 1.68 and 1.64 Ga, uplift rates of c. 22 m/m.y. were calculated from borehole ⁴⁰Ar–³⁹Ar biotite data. Tectonothermal histories, inferred from the combined cooling and uplift rates, are related to simple cooling after the Svecofennian orogeny, to crustal movement in response to far-field effects of c. 1.7 Ga orogenic activities further to the west or to a combination of these possibilities.     

Late Quaternary evolution of Lake Urana,New South Wales,Australia

Lake Urana is a well-preserved relict lake in the semi-arid Riverine Plain of southeastern Australia. A compound lunette at its eastern shoreline consists of a quartz-sand-dominated unit (Bimbadeen Formation), thermoluminescence (TL) dated at 30 ka to 12 ka, and a clay and sand facies unit (Coonong Formation), dated at 55 ka to 35 ka. The intervening period indicates a phase of periodically exposed lake floor and soil formation. The older wet phase conforms well with similar environments recorded from the same period at Lake Mungo. However, the return to high water levels from 30 ka to 12 ka departs sharply from the generally accepted palaeoclimatic model from Australia, which demands severe glacial maximum desiccation and widespread construction of clay lunettes. Although hydrological budgets calculated for Lake Urana and nearby Lake Cullivel require high glacial maximum water levels they do not support higher precipitation.     

Dispersion and toxicity to non-target aquatic organisms of pesticides used to treat sea lice on salmon in net pen enclosures

Pesticides are used extensively in the finfish aquaculture industry to control sea lice infestations on farmed salmon. The most prevalent method of use is to enclose a net pen with an impervious tarpaulin and mix a pesticide solution within that enclosure. After treatment for short periods (1 h) the pesticide solution is released to the environment. Concerns have been raised that there is a potential risk to non-target aquatic organisms from those releases. The fate of dispersing pesticide solutions was measured after six simulated treatments in the Lower Bay of Fundy, New Brunswick. Three simulated treatments were done with azamethiphos and three with cypermethrin. Rhodamine dye was added to all pesticide solutions in order to facilitate tracking of the dispersing plume through real-time measurements of dye concentrations by a flow-through fluorometer coupled with a differential global positioning system (DGPS). Water samples were obtained from within the plumes at various times after release and analysed for pesticide content and toxicity to a benthic amphipod Eohaustorius estuaris. Dye concentrations were detectable for time periods after release which varied from 2 to 5.5 h. Distances travelled by the dye patches ranged from 900 to 3000 m and the dye concentrations at the final sampling period were generally 1/200-1/3000 the pre-release concentrations and cypermethrin concentrations were generally 1/1000-1/2000 the pre-release concentrations. Cypermethrin concentrations in water samples were closely correlated with dye concentrations, indicating that dye analyses were an accurate surrogate for cypermethrin concentrations. Most samples taken after the releases of azamethiphos were not toxic to test organisms in 48 h exposures and none were beyond 20 min post-release. By contrast, almost all samples taken after the release of cypermethrin, even up to 5-h post-release, were toxic. Data indicate the potential to cause toxic effects over areas of hectares from a single release of cypermethrin.     

Anomalous geochemical patterns from northern Sumatra: their assessment in terms of mineral exploration and regional geology

A regional stream sediment survey has been conducted in Sumatra north of 4°N. The survey area is approximately 38,000 km² of mountainous terrain mostly covered by dense tropical rainforest. The overall sample density achieved by the survey was one per ten km². However, the difficult terrain and thick vegetation blanket have meant that a uniform sample density was not obtained. The uneven sample density has presented problems with interpretation of the geochemical patterns and identification of anomalous areas for mineral exploration purposes.Two methods have been designed for identifying mineral exploration targets from the geochemical results found by the survey. The first method uses computerised probability calculations and the second a simple empirical formula. Both methods appear to give similar results.Northern Sumatra has very distinct geochemical patterns. Copper shows a linear zone of high values along the axial Barisan Mountain Range, which are derived from two main sources: the Sumatran ophiolites and copper-rich calc-alkaline intrusives. High chromium values also occur not only over the ophiolites, but also over placers derived from them. High lead values are grouped to the east of the linear copper zone and they border the oil and gas basins of the eastern coastal strip. High tin values occur west of the copper rich intrusives, but east of the present-day subduction zone off the west coast of Sumatra. The overall pattern fails to conform to the classic zonation of mineral deposits across a simple subduction system, perhaps because large transcurrent faults have sliced northern Sumatra into blocks and so brought blocks of different provenance into contact. This explanation is confirmed by the lithium distribution, which reveals two wholly distinct provinces astride the Sumatran Fault System.     

Ab initio elasticity of FeS2 pyrite from 0 to 135 GPa

Polynomial expressions for the elastic tensor coefficients, the bulk, the shear and Young’s moduli, the speed of sound for longitudinal and transverse waves, the equation of state and the x coordinate of the sulfur atom in pyrite are reported based on ab initio calculations in the range of 0–135 GPa. Comparison with published experimental data indicates good agreement for the equation of state and for values at 0 GPa as well as reasonable agreement for first derivatives. All modeling and interpretation was performed with Materials Toolkit v.2.0 and all ab initio computations with VASP.     

Modeling surficial sand and gravel deposits

Mineral-deposit models are an integral part of quantitative mineral-resource assessment. As the focus of mineral-deposit modeling has moved from metals to industrial minerals, procedure has been modified and may be sufficient to model surficial sand and gravel deposits. Sand and gravel models are needed to assess resource-supply analyses for planning future development and renewal of infrastructure. Successful modeling of sand and gravel deposits must address (1) deposit volumes and geometries, (2) sizes of fragments within the deposits, (3) physical characteristics of the material, and (4) chemical composition and chemical reactivity of the material. Several models of sand and gravel volumes and geometries have been prepared and suggest the following: Sand and gravel deposits in alluvial fans have a median volume of 35 million m³. Deposits in all other geologic settings have a median volume of 5.4 million m³, a median area of 120 ha, and a median thickness of 4 m. The area of a sand and gravel deposit can be predicted from volume using a regression model (log [area (ha)] =1.47+0.79 log [volume (million m³)]). In similar fashion, the volume of a sand and gravel deposit can be predicted from area using the regression (log [volume (million m³)]=–1.45+1.07 log [area (ha)]). Classifying deposits by fragment size can be done using models of the percentage of sand, gravel, and silt within deposits. A classification scheme based on fragment size is sufficiently general to be applied anywhere.     

Platinum-group elements in rocks from the voikar-syninsky ophiolite complex,Polar Urals,U.S.S.R.

Analyses of platinum-group elements (PGE) in rocks collected from the Voikar-Syninsky ophiolite in the Polar Urals suggest that the distribution and geochemistry of PGE in this Paleozoic ophiolite are similar to those in Mesozoic ophiolites from elsewhere. Chondrite-normalized PGE patterns for chromitite, the tectonite unit, and ultramafic and mafic cumulate unit have negative slopes. These results are similar to those found for chromitites from other ophiolites; stratiform chromities show positive slopes. If the magmas that form both types of chromitite originate from similar mantle source material with respect to PGE content, the processes involved must be quite different. However, the distinct chondrite-normalized PGE patterns may reflect differing source materials.     

Prograde and retrograde history of the Junction School eclogite,California, and an evaluation of garnet–phengite–clinopyroxene thermobarometry

Quantitative thermobarometry of inclusions in zoned garnet from a Franciscan eclogite block record a counter-clockwise P–T path from blueschist to eclogite and back. Garnet retains prograde zoning from inclusion-rich Alm₅₂Grs₃₀Pyp₆Sps₁₂ cores to inclusion-poor Alm₆₂Grs₂₅Pyp₁₂Sps₁ mantles, with overgrowths of highly variable composition. Barometry using the Waters–Martin version of the garnet–phengite–omphacite thermobarometer yields conditions of 7–15 kbar, 400–500°C (garnet cores), 18–22 kbar, ∼550°C (mantles), and 10–14 kbar, 350–450°C (overgrowths), in agreement with clinozoisite–sphene–rutile–garnet–quartz barometry. These pressures are ∼10–15 kbar less than those obtained using more recent, fully thermodynamic calibrations of the phengite–omphacite–garnet thermobarometer. Low early temperatures suggest that the block was subducted in a thermally mature subduction zone and not at the inception of subduction when prograde temperature is expected to be higher. Franciscan high-grade blocks likely represent crust subducted throughout the history of this convergent margin, rather than only at the inception of the subduction zone.