Estuary/ocean exchange and tidal mixing in a Gulf of Maine Estuary: A Lagrangian modeling study

A Lagrangian particle method embedded within a 2-D finite element code, is used to study the transport and ocean–estuary exchange processes in the well-mixed Great Bay Estuarine System in New Hampshire, USA. The 2-D finite element model, driven by residual, semi-diurnal and diurnal tidal constituents, includes the effects of wetting and drying of estuarine mud flats through the use of a porous medium transport module. The particle method includes tidal advection, plus a random walk model in the horizontal that simulates sub-grid scale turbulent transport processes. Our approach involves instantaneous, massive [O(500,000)] particle releases that enable the quantification of ocean–estuary and inter-bay exchanges in a Markovian framework. The effects of the release time, spring–neap cycle, riverine discharge and diffusion strength on the intra-estuary and estuary–ocean exchange are also investigated.The results show a rather dynamic interaction between the ocean and the estuary with a fraction of the exiting particles being caught up in the Gulf of Maine Coastal Current and swept away. Three somewhat different estimates of estuarine residence time are calculated to provide complementary views of estuary flushing. Maps of residence time versus release location uncover a strong spatial dependency of residence time within the estuary that has very important ramifications for local water quality. Simulations with and without the turbulent random walk show that the combined effect of advective shear and turbulent diffusion is very effective at spreading particles throughout the estuary relatively quickly, even at low (1 m²/s) diffusivity. The results presented here show that a first-order Markov Chain approach has applicability and a high potential for improving our understanding of the mixing processes in estuaries.     

Sample treatment with focused ultrasound and bath sonication as a powerful tool for the evaluation of cadmium pollution in estuarine waters

A new sample treatment was developed for the determination of dissolved cadmium in Tagus estuarine waters, based on focused ultrasound in conjunction with small volumes in the extraction steps for Cd pre-concentration. Cadmium was first pre-concentrated using a classical approach (APDC as the complexing agent and MIBK as the organic phase) and then back-extracted into HNO₃ with the aid of focused ultrasound, which reduced the acid concentration by more than one order of magnitude (from 4 to 0.1 mol L^− 3). This sample treatment was accomplished in less than 5 min, using low sample volume (20 mL), and low-volume, low-concentration reagents. The pre-concentration factor used in this work was 25, but different sample/organic volume ratios may be used in order to increase that value. The limit of detection and the limit of quantification in Tagus water samples were 0.03 nmol L^− 1 and 0.1 nmol L^− 3, respectively. Recoveries from spiked Tagus water were higher than 90%. The procedure was validated using the reference estuarine water NRC-SLEW-3. In the solubilization of Cd particulate, bath ultrasonication was used in conjunction with HNO₃ + HCl, followed by H₂O₂, which took about 2 instead of the usual 12 h (cooling included) when high-pressure microwave digestion is used.     

Diurnal variation of the dayside, ionospheric, mid-latitude trough in the southern hemisphere at 800 km: Model and measurement comparison

Our high latitude ionospheric model predicts the existence of a pronounced “dayside” trough in plasma concentration equatorward of the auroral oval in both the Northern and Southern Hemispheres for solar maximum, winter, and low geomagnetic activity conditions. The trough in the Southern Hemisphere is much deeper than that in the Northern Hemisphere, with the minimum trough density at 800 km being 2 × 10³ cm⁻³ in the Southern Hemisphere and 10⁴ cm⁻³ in the Northern Hemisphere. The dayside trough has a strong longitudinal (diurnal) dependence and appears between 11:00 and 19:00 U.T. in the Southern Hemisphere and between 02:00 and 08:00 U.T. in the Northern Hemisphere. This dayside trough is a result of the auroral oval moving to larger solar zenith angles at those universal times when the magnetic pole is on the antisunward side of the geographic pole. As the auroral ionization source moves to higher geographic latitudes, it leaves a region of declining photoionization on the dayside. For low convection speeds, the ionosphere decays and a dayside trough forms. The trough is deeper in the Southern Hemisphere than in the Northern Hemisphere because of the greater offset between the geomagnetic and geographic poles. Satellite data taken in both the Northern and Southern Hemispheres confirm the gross features of the dayside trough, including its strong longitudinal dependence, its depth, and the asymmetry between the Northern and Southern Hemisphere troughs.     

Richtmyer-Meshkov Experiments on the Omega Laser

Observations of the interstellar medium reveal a dynamic realm permeated by shocks. These shocks are generated on a large range of scales by galactic rotation, supernovae, stellar winds, and other processes. Whenever a shock encounters a density interface, Richtmyer-Meshkov instabilities may develop. Perturbations along the interface grow, leading to structure formation and material mixing. An understanding of the evolution of Richtmyer-Meshkov instabilities is essential for understanding galactic structure, molecular cloud morphology, and the early stages of star formation. An ongoing experimental campaign studies Richtmyer-Meshkov mixing in a convergent, compressible, miscible plasma at the Omega laser facility. Cylindrical targets, consisting of a low density foam core and an aluminum shell covered by an epoxy ablator, are directly driven by fifty laser beams. The aluminum shell is machined to produce different perturbation spectra. Surface types include unperturbed (smooth), single-mode sinusoids, multi-mode (rough), and multi-mode with particular modes accentuated (specified-rough). Experimental results are compared to theory and numerical simulations.     

The macroinfauna of the Galician sandy beaches (NW Spain) affected by the Prestige oil-spill

Eighteen sandy beaches were sampled along the 1659 km of the Galician coast (NW Spain) six months after the Prestige oil-spill to study the impact of the fuel and the clean-up activities on the macroinfauna community. A transect was extended at each beach, from above the drift line to below the swash line at five sampled levels; at each level six 0.05 m2 replicates were taken to a depth of 30 cm and sieved through a 1mm mesh, and the organisms collected and preserved. Results were compared with previous data obtained using the same procedures. The macroinfauna was numerically dominated by the amphipod Pontocrates arenarius, the isopod genus Eurydice, the polychaete Scolelepis squamata, and the amphipod Talitrus saltator. As a result of the Prestige oil-spill and the clean-up activities, beach populations were reduced, with Eurydice and S. squamata as the most affected taxa.     

In situ formation of welded tuff-like textures in the carapace of a voluminous silicic lava flow,Owyhee County,SW Idaho

 The Badlands rhyolite, on the Owyhee Plateau of southwestern Idaho, can be demonstrated to be a large lava flow on the basis of its geometry of large and small flow lobes, its well-exposed near-vent features, and its response to pre-existing topography. However, samples of the dense upper vitrophyre of the unit reveal a range of annealed fragmental textures, including material which closely resembles the compressed, welded glass shards which are characteristic of ignimbrites. Formation of these tuff-like textures involved processes probably common to emplacement of most silicic lava flow units. Decompression upon extrusion causes inflation of pumice at the surface of the lava flow; some of this pumice is subsequently comminuted, producing loose bubble-wall shards, bits of pumice, chips of dense glass, and fragments of phenocrysts. This debris sifts down around loose blocks and into open fractures deeper in the flow, where it can be reheated, compressed, and annealed to varying degrees. The end result is a dense vitrophyre layer (beneath the true upper, non-welded carapace breccia) which can be extremely texturally heterogeneous, with areas of flow-foliated lava occurring very near lava which in many aspects looks like welded ignimbrite, complete with flattened pumices. Identical textures in other silicic units have been cited by previous workers as evidence that those units erupted as pyroclastic flows which then underwent sufficient rheomorphism to create a flow-foliated rock which otherwise appears to be lava. The textures described herein indicate that lava flows can come to mimic rheomorphic ignimbrites, at least at scales ranging from thin sections to outcrops. Voluminous silicic units with scattered fragmental textures, but with otherwise lava-like features, are probably true effusive lava flows. Received: January 30, 1995 / Accepted: January 22, 1996     

ON THE CHARACTERISTICS OF NON-LINEAR SOIL RESPONSE AND DYNAMIC SOIL PROPERTIES USING VERTICAL ARRAY DATA IN JAPAN

Non-linear response of the soil is investigated by comparing the spectral ratios (uphole/downhole) using weak and strong motions. Data from seven vertical arrays in Japan are analysed in this study. The frequency-dependent transfer function of soil is calculated as a ratio of the spectrum at uphole to the spectrum at downhole, considering the horizontal component of shear wave. In spectral ratio analysis auto- and cross-spectra are employed. The reduction in the predominant frequency of the transfer function with increases in excitation level reflects the non-linear response of the soil. Results of analysis demonstrate a significant non-linear ground response at six sites with surface PGA exceeding 90 gal. However, the results of one site show the linear response up to 130 gal surface PGA. Furthermore, the in situ strain-dependent soil behaviour is examined through the shear modulus – shear strain relationship. When compared, the actual and laboratory results of the shear strain – shear modulus relationship are in agreement. Additionally, a good consistency between the tendency of reduction in shear modulus ratio with shear strain increases, and reduction of predominant frequency with ground motion increases, confirms the significance of non-linearity in site effects study.     

Radiation Products in Processed Ices Relevant to Edgeworth-Kuiper-Belt Objects

Near the inner edge of the Edgeworth-Kuiper Belt (EKB) are Pluto and Charon, which are known to have N₂- and H₂O-dominated surface ices, respectively. Such non-polar and polar ices, and perhaps mixtures of them, also may be present on other trans-Neptunian objects. Pluto, Charon, and all EKB objects reside in a weak, but constant UV-photon and energetic ion radiation environment that drives chemical reactions in their surface ices. Effects of photon and ion processing include changes in ice composition, volatility, spectra, and albedo, and these have been studied in a number of laboratories. This paper focuses on ice processing by ion irradiation and is aimed at understanding the volatiles, ions, and residues that may exist on outer solar system objects. We summarize radiation chemical products of N₂-rich and H₂O-rich ices containing CO or CH₄, including possible volatiles such as alcohols, acids, and bases. Less-volatile products that could accumulate on EKB objects are observed to form in the laboratory from acid-base reactions, reactions promoted by warming, or reactions due to radiation processing of a relatively pure ice (e.g., CO → C₃O₂). New IR spectra are reported for the 1–5 mu;m region, along with band strengths for the stronger features of carbon suboxide, carbonic acid, the ammonium and cyanate ions, polyoxymethylene, and ethylene glycol. These six materials are possible contributors to EKB surfaces, and will be of interest to observers and future missions.