Petrographische und Kalium-Argon-Untersuchungen an basischen tertiären Vulkaniten zwischen Westerwald und Vogelsberg

Between the upper tertiary volcanic areas of Westerwald and Vogelsberg (central Western Germany) occur more than 40 isolated tertiary volcanic dikes, eroded necks, plugs and domes. Twelve of these volcanic rocks have been investigated petrographically and chemically and classified by means of their modal and chemical composition. Additional modal analyses have been performed on seven other volcanics. On seventeen volcanic occurences K-Ar-whole rock age determinations have been made. The K-Ar age determinations yield- with the exception of an olivine-nephelinite — values between 27 and 15 Ma. Regarding the known intervals of volcanic activities of the Westerwald- and Voge1sberg-areas, most of the examined volcanics can be related genetically with one of the adjacent volcanic areas. There seems to be no geographical overlapping of volcanics showing Westerwaldages and Vogelsberg-ages. A possible influence of excess-Ar-bearing phases (e. g. mantle xenoliths) and an Ar-loss of constituent matter of the groundmass have been estimated by additional age determinations of enriched samples. These influences — partially compensating each other — may shift the K-Ar whole rock age to a maximum of 5 % and thus do not exceed the dimension of the standard deviations. A distinct NNE-SSW-striking fault in the region between Marburg and Gießen is situated parallel with the eastern border of the “Rheinisches Schiefergebirge”. Volcanics showing Westerwald-age and Vogelsberg-age respectively reach this fault, but obviously do not overlap it. Relations between rock-type an rock age, as it has been observed for the volcanics of the northern Hessian Depression (Kreuzer et al. 1973;Wedepohl 1982) cannot be proved certainly. On the other hand, similar to the basaltic rocks of the northern Hessian Depression, the youngest volcanic product is an olivine-nephelinite (9 Ma).     

The southern agglomeration zone of the GDR — Regional structure and development

Agglomeration areas in the GDR are those regions, which are characterized by an above average level of regional concentration of productive forces and their conditions of reproduction. The economic potential concentrated in these regions represents a large part of the national economy. It is possible to describe the territorial structure of these agglomeration areas by general indices (agglomeration core — agglomeration field — agglometation fringe; polycentric node-band-structure), but also the individual features of each one of these regions are to be attended. They are expressed for the first time by several forms of localization of plants and by the structure of settlements and settlement networks. The present main tendencies in the development of the agglomeration regions are:

They succeeded in minimizing the regional disparities of productivity between different agglomeration regions and within them, and in stabilizing the economic position of these regions by systematic measures for investment and rationalization and the hereby influenced structural changes.

At present and up to 1990 the completion of housing programme is of foremost importance by which the main activities will shift from the urban fringe to the centres of the cities; provincial towns and smaller settlements will also participate in this programme.

The main target of these activities is to remove imperfect structures and other burning problems of the agglomeration regions step by step. Geographical Institutes are dealing with the management of these tasks too.     

Nonsulfide zinc deposits in the Silesia–Cracow district,Southern Poland

The Silesia–Cracow district in Poland has been one of the world’s principal sources of zinc from nonsulfide zinc ore (Polish: galman). The still remaining nonsulfide ore resources can be estimated at 57 Mt at 5.6% Zn and 1.4% Pb. Nonsulfide mineralization is mainly hosted by Lower Muschelkalk (Triassic) limestone and is associated with different generations of the hydrothermal ore-bearing dolomite (OBD I, II, III). A fundamental ore control is believed to have been exerted by the basement faults, which were repeatedly reactivated during the Alpine tectonic cycle, leading to the formation of horst-and-graben structures: these dislocations may have caused short periods of emersion and the circulation of meteoric waters during the Cenozoic. Nonsulfide ores show a wide range of morphological characteristics and textures. They occur as earthy masses, crystalline aggregates, and concretions in cavities. Breccia and replacement textures are also very common. The most important mineral phases are: smithsonite, Fe–smithsonite, Zn–dolomite, goethite, and Fe–Mn(hydr)oxides. Minor hemimorphite and hydrozincite have also been detected. Two distinct nonsulfide ore types occur: the predominant red galman and the rare white galman. In the white galman, Fe–smithsonite and Zn–dolomite are particularly abundant. This ore type is commonly considered as a peripheral hydrothermal alteration product related to the same fluids that precipitated both the OBD II–III and the sulfides. In contrast, a supergene origin is commonly assumed for the red galman. Evidence of the petrographic and mineralogical difference between white and red galman is also found in stable isotope data. Smithsonite from red galman shows a limited range of δ ¹³C_VPDB values (−10.1 to −11.4‰), and δ ¹⁸O_VSMOW values (25.3‰ to 28.5‰, mean 26.8 ± 0.3‰). The uniform and low carbon isotope values of red galman smithsonite are unusual for supergene carbonate-hosted deposits and indicate the predominance of a single organic carbon source. Smithsonite from white galman has a more variable, slightly more positive carbon isotope (−2.9‰ to −7.4‰), but broadly similar oxygen isotope composition (26.8‰ to 28.9‰). The relationship of the white galman ore with the hydrothermal system responsible for OBD II and sulfide generation is still uncertain. The most important paleoweathering events took place in both Lower and Upper Silesia during Late Cretaceous up to Paleogene and early Neogene time. During this period, several short-lasting emersions and intense weathering episodes facilitated the formation of sinkholes in the Triassic carbonate rocks and the oxidation of sulfide orebodies through percolating meteoric waters. These phenomena may have lasted until the Middle Miocene.     

Thermal conductivity measurements of road construction materials in frozen and unfrozen state

A series of thermal conductivity measurements for various materials was performed in a large climate chamber. The size of the chamber allowed the preparation of relatively large samples in a controlled thermal environment. Three types of thermal sensors were used: (1) two needle probes; (2) a grid of temperature sensors, evenly distributed inside the sample; (3) two additional thermal probes, which were simplified versions of an instrument originally developed for measuring thermal properties of the ice/dust mixture expected to exist at the surface of a comet nucleus. They consist of a series of individual temperature sensors integrated into a glass fibre rod. Each of these sensors can be operated in an active (heated) or passive (only temperature sensing) mode. The following sample materials were used: fine-grained reddish sand, coarse-grained moist sand, gravels with various grain size distributions from < 1 cm up to about 6 cm, and for comparison and calibration pure water (with convection suppressed by adding agar-agar), compact ice, and compact granite. Of particular interest are the measurements with composite samples, like stones embedded in an agar-agar matrix. We describe the evaluation methods and present the results of the thermal conductivity measurements.     

Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.     

World-wide synthetic tide parameters for gravity and vertical and horizontal displacements

The response of the Earth’s crust to the direct effect of lunisolar gravitational forcing is known as the body tide. The body tide is superimposed by surface-loading forces due to the pressure of the periodically varying ocean tide acting on the Earth, called ocean tide loading (OTL). Both body tide and OTL can be decomposed into components of the same frequency known as tidal parameters. However, OTL is more complicated than body tides because of the dynamic effects of the ocean. Estimating OTL requires a model of the ocean tides and knowledge of the elastic properties of the solid Earth. Thus, synthetic tide parameters (amplitude factors and phase leads) have been developed here on a world-wide grid for gravity and positional displacements. The body tide contributions were added to the oceanic contribution to provide the Earth tide response. The accuracy and reliability of the synthetic tidal parameters have been estimated by comparing observed gravity and vertical-displacement tide parameters with those interpolated from our synthetic model, which shows good agreement. Tests also indicate that the synthetic tide parameters provide realistic gravimetric and displacements for practical use in tidal prediction.