Mode trapping in sdO models

Mode trapping of high-radial order gravity modes was found for a particular sdO model. The trapping is caused by the change in composition from the helium radiative shell to the hydrogen burning shell. A non-adiabatic effect of this trapping is the higher tendency to instability of the trapped modes. Low- to intermediate-radial order pressure modes (in sdO models they correspond to mixed modes with most nodes in the P-mode region) are found to be trapped by the chemical transition from the carbon-oxygen core to the He burning shell. As the trapping is produced in the deep interior of the star, where energy interchange is negligible at the p-mode frequencies, it has no particular effect on the driving.     

64排螺旋CT对胫骨平台隐匿性骨折的诊断及临床意义

目的：探讨64排螺旋CT对胫骨平台隐匿性骨折的诊断价值及临床意义。方法：收集2008年1月至2011年12月连续21例门急诊下肢外伤后普通X线平片表现为阴性及可疑骨折,64排螺旋CT检查确诊为胫骨平台骨折患者影像资料,并重新采用多层面重建（MPR）;容积显示（VR）和最大灰度重建（MIP）等多种后处理技术进行回顾性分析。结果：MDCT3D共显示SchatzkerⅠ型10例;Ⅱd型4例;Ⅲ3例;Ⅳ型2例;Ⅳ型1例和Ⅴ型1例。结论：64排螺旋CT联合应用多种重建技术对胫骨平台隐匿性骨折的评价是可靠和准确的。可以准确评估21例胫骨平台骨折的部位、类型、程度及并发症等。明显提高了诊断准确性,避免了普通     

Performance of CMORPH,TMPA, and PERSIANN rainfall datasets over plain,mountainous, and glacial regions of Pakistan

The present study aims at the assessment of six satellite rainfall estimates (SREs) in Pakistan. For each assessed products, both real-time (RT) and post adjusted (Adj) versions are considered to highlight their potential benefits in the rainfall estimation at annual, monthly, and daily temporal scales. Three geomorphological climatic zones, i.e., plain, mountainous, and glacial are taken under considerations for the determination of relative potentials of these SREs over Pakistan at global and regional scales. All SREs, in general, have well captured the annual north-south rainfall decreasing patterns and rainfall amounts over the typical arid regions of the country. Regarding the zonal approach, the performance of all SREs has remained good over mountainous region comparative to arid regions. This poor performance in accurate rainfall estimation of all the six SREs over arid regions has made their use questionable in these regions. Over glacier region, all SREs have highly overestimated the rainfall. One possible cause of this overestimation may be due to the low surface temperature and radiation absorption over snow and ice cover, resulting in their misidentification with rainy clouds as daily false alarm ratio has increased from mountainous to glacial regions. Among RT products, CMORPH-RT is the most biased product. The Bias was almost removed on CMORPH-Adj thanks to the gauge adjustment. On a general way, all Adj versions outperformed their respective RT versions at all considered temporal scales and have confirmed the positive effects of gauge adjustment. CMORPH-Adj and TMPA-Adj have shown the best agreement with in situ data in terms of Bias, RMSE, and CC over the entire study area.     

Late Quaternary vegetation and climate dynamics in central-eastern Brazil: insights from a ~35k cal a bp peat record in the Cerrado biome

The late Quaternary evolution of central-eastern Brazil has been under-researched. Questions remain as to the origin of the Cerrado, a highly endangered biome, and other types of vegetation, such as the Capões – small vegetation islands of semi-deciduous and mountain forests. We investigated the factors that influenced the expansion and contraction of the Cerrado and Capões during the late Quaternary (last ~35 ka), using a multi-proxy approach: stable isotopes (δ¹³C, δ¹⁵N), geochemistry, pollen and multivariate statistics derived from a peat core (Pinheiro mire, Serra do Espinhaço Meridional). Five major shifts in precipitation, temperature, vegetation and landscape stability occurred at different timescales. Our study revealed that changes in the South Atlantic Convergence Zone (SACZ) seem to have been coeval with these shifts: from the Late Glacial Maximum to mid-Holocene the SACZ remained near (~29.6 to ~16.5k cal a bp ) and over (~16.5 to ~6.1 k cal a bp ) the study area, providing humidity to the region. This challenges previous research which suggested that climate was drier for this time period. At present, the Capões are likely to be a remnant of a more humid climate; meanwhile, the Cerrado biome seems to have stablished in the late Holocene, after ~3.1 k cal a bp .     

Numerical properties of low-frequency expansions for the reflection and transmission coefficients from transition layers

Summary The numerical properties of the low-frequency expansions for the reflection and transmission coefficients of SH-waves from transition layers, derived in [1], are studied. It is shown that the expansions are suitable for computations only when the thickness d of the transition layer is small in comparison with the wavelength of the incident wave (d0.5). For thicker transition layers, certain modifications of the method are suggested.     

Methodology of hydrogeological characterization of deep carbonate aquifers as potential reservoirs of groundwater. Case of study: the Jurassic aquifer of <Emphasis Type="Italic">El Maestrazgo</Emphasis> (Castellón,Spain)

A methodology for the characterization of deep carbonate aquifers has been developed and applied to El Maestrazgo Jurassic aquifer in Castellón, Spain. Characterization of these aquifer formations, located at more than 300 m deep, consisted of a previous phase of compilation, analysis and synthesis of the existing information about the area, followed by a coordinated combination of different speciality studies: geology, stratigraphy, structural analysis, hydrogeology, hydrochemistry, geophysics and remote sensing. Geological studies included geological mapping, definition of stratigraphical units and facies and structural analysis. The aim of the hydrogeology study was to define aquifer formations, recharge area, aquifer points inventory and groundwater flow directions for the establishment of piezometric and water quality observation nets. Special techniques were applied, like thermal infrared aerial images and the evaluation of submarine groundwater discharge by means of natural radium isotopes. Hydrochemical techniques, including majority elements characterization and stable isotopes (¹⁸O, ²H and ³H) determination, allowed classifying hydrochemical facies and establishing a renewal pattern for water within the system. Geophysics was useful in determining the aquifer geometry, the features of the basement and the petrophysical characteristics of the geological formations. Preliminary results show an important tectonic complexity and the possibilities for groundwater uses in the area of study.     

Inertial instability of large Rossby number horizontal shear flows in a thin homogeneous layer

A horizontal shear flow having a Rossby number, Ro, greater than unity on a rotating plane can become unstable when its shear value is less than −f, the Coriolis frequency. In this paper, this instability is investigated for an O(10 km) submesoscale, sinusoidal shear flow in a thin homogeneous fluid layer as in an oceanic mixed layer or a shallow sea. The most unstable mode is shown by a linear analysis to occur in a narrow localized region centered around the maximum anticyclonic current shear. However, nonlinear numerical calculations show that the instability can grow to encompass both unstable and stable regions of the current. A consequence of this finite-amplitude evolution is the formation of surface convergence/shear fronts. The possibility that inertial instability mechanism is a source of some surface convergence/shear features seen in remote sensing images of the sea surface is discussed. A comparison is made with the shear-flow instability that can occur concurrently in a sinusoidal shear current, and inertial instability is shown to be the dominant instability mechanism in the immediate range above Ro=2.     

Soil contamination from urban and industrial activity: example of the mining district of Linares (southern Spain)

The Linares region (southern Spain) has been subjected to two important sources of pollution: the intensive mining works and the urban-industrial activity. To obtain a geochemical characterisation of the soil, 31 trace elements were analysed and 669 soil samples were collected. By means of clustering analysis, we identified groups of elements and grid squares in which relations could be established concerning soil lithology, urban and industrial activities and the degree of pollution impact; in addition, we were able to characterise the geochemical background of the study area. The multivariate study led us to identify four factors. Particularly important was factor 2, which represented the elements associated with mineral paragenesis (Cu, Pb, As, Co, Mn, Zn, Sn, Ba). This factor also contains elements related with an urban-industrial activity, such as Pb, Cu, Zn, As and Ba. Furthermore, we identified factor 4, associating Ni, V and Cr, and which is related to the use of fuels.     

An orthotropic interface damage model for simulating drying processes in soils

The study of drying process in soils has received an increased attention in the last few years. This is very complex phenomenon that generally leads to the formation and propagation of desiccation cracks in the soil mass. In recent engineering applications, high aspect ratio elements have proved to be well suited to tackle this type of problem using finite elements. However, the modeling of interfaces between materials with orthotropic properties that generally exist in this type of problem using standard (isotropic) constitutive model is very complex and challenging in terms of the mesh generation, leading to very fine meshes that are intensive CPU demanding. A novel orthotropic interface mechanical model based on damage mechanics and capable of dealing with interfaces between materials in which the strength depends on the direction of analysis is proposed in this paper. The complete mathematical formulation is presented together with the algorithm suggested for its numerical implementation. Some simple yet challenging synthetic benchmarks are analyzed to explore the model capabilities. Laboratory tests using different textures at the contact surface between materials were conducted to evaluate the strengths of the interface in different directions. These experiments were then used to validate the proposed model. Finally, the approach is applied to simulate an actual desiccation test involving an orthotropic contact surface. In all the application cases the performance of the model was very satisfactory.     

Study of a rockfall in a limy conglomerate canyon (Covarrubias, Burgos, N. Spain)

In this paper, a rockfall of some tenths of cubic metres of rock, occurred in a conglomerate canyon in the northern Castilian plateau (N-Central Spain), is described in detail. This includes the basic data (geology, mapping, meteorological data and rock involved), the mechanical mechanism of the instability, the propagation and reach of the fallen rock boulders and the final location of the pieces. The study is based on detailed geological, aerial photography and geotechnical studies and advance topographical measurements. Geological engineering techniques are used to analyze the instability initiation and rockfall propagation. This study contributes to a better understanding of the geological processes leading to the occurrence of calcareous canyons and cliffs in the drainage network of the upper Castilian plateau. It is also helpful to improve our knowledge on natural rockfall phenomena for risk engineering purposes aiming to quantify, control and mitigate associated hazards.