Contemporary crustal deformation of the Chinese continent and tectonic block model

We obtain the preliminary result of crustal deformation velocity field for the Chinese continent by analyzing GPS data from the Crustal Motion Observation Network of China (CMONOC), particularly the data from the regional networks of CMONOC observed in 1999 and 2001. We delineate 9 technically active blocks and 2 broadly distributed deformation zones out of a dense GPS velocity field, and derive block motion Euler poles for the blocks and their relative motion rates. Our result reveals that there are 3 categories of deformation patterns in the Chinese continent. The first category, associated with the interior of the Tibetan Plateau and the Tianshan orogenic belt, shows broadly distributed deformation within the regions. The third category, associated with the Tarim Basin and the region east of the north-south seismic belt of China, shows block-like motion, with deformation accommodated along the block boundaries only. The second category, mainly associated with the borderland of the Tibetan Plateau, such as the Qaidam, Qilian, Xining (in eastern Qinghai), and the Diamond-shaped (in western Sichuan and Yunnan) blocks, has the deformation pattern between the first and the third, i.e. these regions appear to deform block-like, but with smaller sizes and less strength for the blocks. Based on the analysis of the lithospheric structures and the deformation patterns of the regions above, we come to the inference that the deformation modes of the Chinese continental crust are mainly controlled by the crustal structure. The crust of the eastern China and the Tarim Basin is mechanically strong, and its deformation takes the form of relative motion between rigid blocks. On the other hand, the northward indentation of the Indian plate into the Asia continent has created the uplift of the Tibetan Plateau and the Tianshan Mountains, thickened their crust, and raised the temperature in the crust. The lower crust thus has become ductile, evidenced in low seismic velocity and high electric conductivity observed. The brittle part of the crust, driven by the visco-plastic flow of the lower crust, deforms extensively at all scales. The regions of the second category located at the borderland of the Tibetan Plateau are at the transition zone between the regions of the first and the third categories in terms of the crustal structure. Driven by the lateral boundary forces, their deformation style is also between the two, in the form of block motion and deformation with smaller blocks and less internal strength.     

STRUCTURAL CHARACTERISTICS OF THE NIUSHOU MOUNTAIN AND ITS GEOLOGICAL SIGNIFICANCE IN CENTRAL NINGXIA

There are many thrust-related structures occurring in the Paleozoic strata of the Niushou Mountain in the central part of Ningxia Hui Autonomous Region. The fault-related folds are the typical structures in this area. Based on the analysis about these structures and their relationships, the processes by which these structures of the Miboshan Formation were formed are reconstructed, and the strata underwent about three stages of deformation: (1) horizontal shortening, (2) folding, and (3) thrusting. And the fact that the Niushou Mountain is the leading edge of an old thrust sheet was proved, the Niushou Mountain, the Daluo Mountain and the Xiaoluo Mountain together constitute the front part of this old thrust zone, so the Niushou Mountain and the Ordovician strata in the central and southern parts of Ningxia now are likely allochthons. In the period from middle Ordovician to Devonian, the areas of the central and southern Ningxia belonged to the back-arc foreland basin of North Qilianshan orogen, which was adjacent to the continent in the north. In the later part of the early Paleozoic period, the Niushou Mountain was formed after the closure of the back-arc foreland basin.     

Surface analysis of pyrite in the No. 9 coal seam, Wuda Coalfield, Inner Mongolia, China, using high-resolution time-of-flight secondary ion mass-spectrometry

The chemical composition of pyrite in coal can be used to investigate its geological and mineralogical origin. In this paper, high-resolution time-of-flight secondary ion mass spectrometry (TOF-SIMS) was used to study the chemical composition of various pyrite forms in the No. 9 coal seam (S_t,d=3.46%) from the Wuda Coalfield, Inner Mongolia, northern China. These include bacteriogenic, framboidal, massive, cell-filling, fracture-filling, and nodular pyrites. In addition to Fe⁺ (⁵⁴Fe⁺, ⁵⁶Fe⁺, ⁵⁷Fe⁺), other fragment ions were detected in bacteriogenic pyrites, such as ²⁷Al⁺, Si⁺ (²⁸Si⁺, ²⁹Si⁺, ³⁰Si⁺), ⁴⁰Ca⁺, Cu⁺ (⁶³Cu⁺, ⁶⁵Cu⁺), Zn⁺ (⁶⁴Zn⁺, ⁶⁶Zn⁺, ⁶⁷Zn⁺, ⁶⁸Zn⁺), Ni⁺ (⁵⁸Ni⁺, ⁶⁰Ni⁺, ⁶²Ni⁺), and C₃H₇⁺. TOF-SIMS images show bacteriogenic pyrites are relatively rich in Cu, Zn, and Ni, suggesting that bacteria probably play an important role in the enrichment of Cu, Zn, and Ni during their formation. Intense positive secondary ion fragments from framboidal aggregates, such as ²⁷Al⁺, ²⁸Si⁺, ²⁹Si⁺, AlO⁺, CH₂⁺, C₃H₃⁺, C₃H₅⁺, and C₄H₇⁺, indicate that formation of the framboidal aggregates may have occurred together with clay mineral and organic matter, which probably serve as the binding substance. The intense ions of ²⁸Si⁺ and ²⁷Al⁺ from massive pyrites also suggest that their pores incorporated clay minerals during crystallization. Together with the lowest ²⁸Si⁺/²³Na⁺ value, the intense organic positive secondary ion peaks from cell-filling pyrites, such as C₃H₃⁺, C₃H₅⁺, C₃H₇⁺, and C₄H₇⁺, indicate that pyrite formation may have accompanied dissolution or disintegration of the cell. The intense P⁺ peak was observed only in the fracture-filling pyrite and the highest ²⁸Si⁺/²³Na⁺ value of fracture-filling pyrite reflects its epigenetic origin. Together with XRD and REEs data, the stronger ⁴⁰Ca⁺ in nodular pyrite than other pyrite forms shows seawater influence during its formation.     

土体颗粒破碎研究进展

在打入桩的桩端以及大型土石坝、海洋平台等的地基中常常会出现高应力区。在这些高应力区中,作为地基的粒状土的颗粒会发生不同程度的破碎。对高应力水平下粒状土体的破碎特性进行深入研究有助于解决这一类型的岩土工程问题。因此近年来土体颗粒破碎逐渐引起人们的重视。本文对土体颗粒破碎研究现状进行了详尽的阐述,并指出研究中存在的问题及今后研究发展方向。     

长白山天池火山区长白-敦化剖面结晶基底的探测和研究

时间项分析法中，应用广义最小二乘法进行反演，对长白山天池火山区岩浆系统的长白—敦化(L1)剖面的Pg波到时进行了计算处理，得到了Pg波时间项及基底速度值；取上部地壳的介质平均速度为4．5km/s，经反演求得了各点的深度值，给出了长白山天池火山区结晶基底的厚度分布。结晶基底厚度一般在2．0km左右，而在长白山天池下方结晶基底最厚处接近4．0km；在万宝和敦化附近各有一不太明显的凹陷，其原因可能与在这两个位置处有几条断裂穿过有关。     

科尔沁沙地巴克窑地区近150年的环境演变*

在沉积和花粉分析的基础上,对科尔沁沙地东南部巴克窑地区过去150年的植被和环境演变进行了重建。巴克窑等湖泡的诞生时间是在上个世纪前期,约1837年前后。这个时间也正是科尔沁沙地东南部地区首次大规模人口移入和垦荒年代。突然增加的人类活动导致了沙丘植被的迅速破坏,而植被减少和沙丘活化引起区域水文循环的重新调整,即原来通过植物蒸腾作用输出的水量明显减弱,致使地下潜水位上升,形成一系列湖泡。以后,沙地系统的演化主要是在人类活动、气候和系统内部反馈机制的共同作用下完成的。     

综合物探在鄱阳湖铁路特大桥勘察中的应用

鄱阳湖铁路特大桥桥址位于鄱阳湖入长江的交汇处。该区地质情况复杂,断裂构造十分发育,因此地质勘探对桥址方案的比选显得尤为重要。此次有效地利用了综合物探,采用多种方法查明了岩性分区和地质构造格局,取得了良好的地质效果。充分显示了综合勘探、综合物探的优势。     

安山岩中黄铜矿矿石分析和制硫酸铜工艺的研究

安山岩中的黄铜矿是庐江中生代陆相火山热液型铜矿床的原生矿，矿石中主要伴生黄铁矿及少量斑铜矿、赤铁矿和褐铁矿。物相分析结果，黄铜矿的粒度很细，只有细磨才能单体解离；它在矿石中分布极不均匀，且与脉石矿物接触疏松，适于粗磨抛尾。物性分析结果，黄铜矿在４００～５３０℃、斑铜矿在４５０～６００℃、黄铁矿在５００～６８０℃氧化分解。实验研究表明，矿石经磨碎磁选，大部分的粗粒级的铁矿物能够回收；粗磨抛尾可获得铜、硫的粗精矿；然后再经硫酸化焙烧、酸浸、过滤、提纯、浓缩结晶可制得工业级硫酸铜。浸渣做炼铁原料，黄钾铁矾做Ｆｅ２Ｏ３颜料，有时还可回收金、银。     

脉金矿床控矿条件及源区性质刍议

目前对脉金矿床，特别是大型金矿床的形成研究已取得重要进展，它在时间和空间上具有明显的一致性表明：大型脉金矿床的形成与特定的地质背景有密切关系，矿源具有深源性质，而与探矿岩系金的丰度值基本无关。