潍坊"5.19"强对流天气过程分析

利用常规气象资料、T213实况分析资料、全国雷达拼图资料、济南多普勒雷达和潍坊本市雷达资料及自动站资料，对2003年5月19日一次强对流天气过程进行分析，结果表明，快速东移南下的横槽极其槽后的冷空气使不稳定层结加强，是触发此次对流发生的原因。而低层暖湿气流的存在为其发展提供了必要的动力和水汽条件。     

西安市冬季冷暖的历史演变对采暖的影响

本文针对CAPPS2.0系统在业务化自动运行过程中的一些问题,提供了一套具体可行的解决方案,实现了CAPPS系统的全自动运行,具有很高的实用价值。     

侯马市酸雨概况及其气象条件分析

通过对侯马近14a酸雨观测资料分析,发现侯马出现酸雨的概率较大,强度较强,时间变化特征明显,与气象条件关系密切。     

大功率激电测深法寻找焦家式深部金矿床的试验应用研究

利用大功率的激电测深法可以寻找焦家式深部金 矿。首先,由物理和数学推导建立多层极化体的数 理模型,其数理模型产生的极化场可由多层若干 个极化单元场相叠加而成。由多次去除极化单元 场的原理而导出大功率激电测深资料进行消除浅 部强激电干扰异常的数据处理公式,从而突出了 深部矿床的激电异常。并利用处理后的激电测深 曲线,定量求取了深部金矿蚀变矿化带的顶界面 埋深。     

基于二维小波变换的FMI图象分割

为了从FMI资料中定量提取参数，一个重要的步骤是从实际FMI资料中分离出反映溶孔、溶洞、裂缝的子图像。本文给出的方法，考虑图像像元邻域的特征，应用二维小波变换求出目标与背景边缘的点集，按这个边缘点集的坐标点所对应的原图像像素灰度值的平均值作为分割阈值进行图像分割。实际资料处理表明，应用这种方法可以从实际的FMI资料中准确地分割出孔洞、裂缝的子图像并且可以按深度段连续自动处理，为后续定量计算参数奠定了良好基础。     

青西油田碳酸盐岩裂缝性储层地球物理预测技术的应用

白云岩成岩收缩晶间孔、洞、缝与构造网状缝相互沟通可以组成良好的油气储层，但是这种复杂裂缝—孔隙型储层分布随机性强、发育程度和差异性大，储层预测难度大。本文以中国西部酒泉盆地青西油田下白垩统下沟组湖相白云岩裂缝—孔隙型储层为例，提出地球物理综合预测碳酸盐岩裂缝的方法。本文描述了综合地球物理方法预测碳酸盐岩裂缝储层的实施和应用效果。     

储层岩石电性特征的逾渗网络模型研究(英文)

建立能够反映储层孔隙结构、流体特征的逾 渗网络模型,通过数值模拟研究了储层孔隙尺寸、 孔隙形状、连通性、微孔隙的发育状况等对I-Sw曲 线影响的定性规律,研究了地层水矿化度对岩石电 阻率的影响。分析讨论了不同因素对电阻率影响的 相对强度。最后,通过曲线拟合定量地研究了不同 因素对I-Sw曲线的影响规律。研究表明,在上述影 响因素中连通性和微孔隙对I-Sw曲线的影响很大, 其它因素的影响强度较小。地层水矿化度对岩石电 阻率绝对值的影响很大。“非阿尔奇”现象普遍存在, 在低渗透(低连通性)储层岩石中更为明显。     

Thermodynamic conditions of framework grain dissolution of clastic rocks and its application in Kela 2 gas field

Feldspar and clastic debris are the most important constituent framework grains of sedimentary clastic rocks and their chemical dissolution plays an essential role in the formation and evolution of the secondary pore in the reservoir rocks. On the basis of thermodynamic phase equilibrium, this study investigates the chemical equilibrium relationships between fluid and various plagioclase and K-feldspar in diagenesis of the sediments, particularly, the impact of temperature and fluid compositions (pH, activity of K+, Na+, Ca2+ and so on) on precipitation and dissolution equilibria of feldspars. Feldspar is extremely easily dissolved in the acid pore water with a low salinity when temperature decreases. The dissolution of anorthite end-member of plagioclase is related to the Ca content of the mineral and the fluid, higher Ca either in the mineral or in the fluid, easier dissolution of the feldspar. Moreover, the dissolution of albite end-member of plagioclase is related to Na of both the mineral and fluid,     

鄂尔多斯盆地南部的黄土塬区地震资料处理与解释,第一部分:地震资料处理

Branching river channels and the coexistence of valleys, ridges, hiils, and slopes＇as the result of long-term weathering and erosion form the unique loess topography. The Changqing Geophysical Company, working in these complex conditions, has established a suite of technologies for high-fidelity processing and fine interpretation of seismic data. This article introduces the processes involved in the data processing and interpretation and illustrates the results.     

Converted-wave seismology in anisotropic media revisited,Part I: Basic theory

We have developed new basic theories for calculating the conversion point and the travel time of the P-SV converted wave (C-wave) in anisotropic, inhomogeneous media. This enables the use of conventional procedures such as semblance analysis, Dix-type model building and Kirchhoff summation, to implement anisotropic processing, and makes anisotropic processing affordable. Here we present these new developments in two parts: basic theory and application to velocity analysis and parameter estimation. This part deals with the basic theory, including both conversion-point calculation and moveout analysis. Existing equations for calculating the PS-wave (C-wave) conversion point in layered media with vertical transverse isotropy (VTI) are strictly limited to offsets about half the reflector depth (an offset-depth ratio, xlz, of 0.5), and those for calculating the C-wave traveltimes are limited to offsets equal to the reflector depth (x/z=l.0). In contrast, the new equations for calculating the conversion-point extend into offsets about three-times the reflector depth (x/z=3.0), those for calculating the C-wave traveltimes extend into offsets twice the reflector depth (x/z=2.0). With the improved accuracy, the equations can help in C-wave data processing and parameter estimation in anisotropic, inhomogeneous media. This work is funded by the Edinburgh Anisotropy Project (EAP) of the British Geological Survey. First author: Xiangyang Li, Mr. Li is currently a professorial research seismologist (Grade 6) and technical director of the Edinburgh Anisotropy Project in the British Geological Survey. He also holds a honorary professorship in multicomponent seismology at the School of Geosciences, University of Edinburgh. He received his BSc(1982) in Geophysics from Changchun Geological Institute, China, an MSc (1984) in applied geophysics from East China Petroleum Institute (now known as the China University of Petroleum), and a PhD (1992) in seismology from the University of Edinburgh. During 1984–1987, he worked as a lecturer with the East China Petroleum Institute. Since 1991, he has been employed by the British Geological Survey. His research interests include seismic anisotropy and multicomponent seismology.