Seismic noise at the international gravity point in Prague-Ruzyně (Czechoslovakia)

Summary The vertical component of ground displacement was measured at the Prague - Ruzyn International Gravity Point in the frequency range of 1–300 Hz. The permanent noise, the vibrations caused by the observers during gravimetric observations and by the wind, as well as those due to normal operations at the airport, display maximum peak-to-peak amplitudes of 0.06 µm in the frequency range of 1–50 Hz; with a CG-2 gravimeter this is not detrimental to the accuracy of the observations. The taxiing of turbo-jet and jet aircraft and engine tests of aircraft generate vibrations in frequency ranges of 75–90 and 190–270 Hz. Their amplitudes, according to the results of laboratory tests published for various types of gravity meters (CG-2, GAK-PT, GVP-3, KVG), are of magnitudes which generate errors in tenths of mgl.     

Results of the earth-tide measurements at the Pecný station (CSSR)

¶rt;mam mam a¶rt;u, m u a nuu mauu nu¶rt; 1970–1977. nauaumGs 11 No 131, 201 uGs 15 No 228. a¶rt; ¶rt;uam mauau ¶rt;u um. ¶rt;uu au naam nuu nu¶rt; ma. 2,uuu au ma. 3.

---

---

Paper presented at the IUGG XVII Plenary Meeting, Canberra, Dec. 1979.     

Isotopic age and metamorphic history of the banded gneiss at Danmarkshavn,East Greenland

Along the northern part of the East Greenland coast the Caledonian structures are superimposed on an older fold system called the Carolinidian. Traces of this Carolinidian belt are preserved in a few isolated fragments within the Caledonian fold belt. According to Haller (1970) one of these fragments exhibiting the typical Carolinidian NNW to NW-trending infrastructural folds is the peninsula of Germania Land which is accessible near the Danish weather station Danmarkshavn. The rock sampled there is a banded gneiss of granodioritic composition with steeply inclined, NNW-trending layers. Isotopic age determinations yielded essentially two groups of ages: 1) 3,000±150 m.y. (zircon suite and Rb/Sr whole rock analyses of layers) and 2) 320–380 m.y. (Rb/Sr mineral isochrons, U-Th-Pb on sphene, K/Ar on hornblende and biotite). The egg-shaped zircons support a sedimentary origin of the banded gneiss and in conjunction with the Rb/Sr whole rock ages determine the age of formation of the banded gneiss (or its last high grade metamorphism) some 3,000 m.y. ago. No other Precambrian metamorphism or orogeny is recorded in the rock. The ages between 320–380 m.y. date a thermal event of lower amphibolite facies grade related to a late Caledonian spasm.The new isotopic data reveal the existence of very old rocks in the hinterland — away from the direction of thrusting—of the East Greenland Caledonian belt. With respect to the age of the Carolinidian fold system three geological interpretations are compatible with the results of this study:

Displacement of points determined by spatial intersection

Summary A procprocedure is presented for the direct determination of the components of the vector of spatial displacement of a point by spatial intersection. The horizontal, vertical and slope distances are determined by integrated surveying systems (electronic tacheometers), and the first survey is adjusted using conditional observations. The vector of displacement on the individual intervals of observation is determined by means of the matrix equation (33) into which it is only necessary to substitute the appropriate vectors of the observational differences.     

Images of post-flare coronal structures in X-rays

This is an extended abstract of several papers mentioned in the references describing extensive coronal structures related to radio continua and imaged in > 3.5 keV X-rays.Proceedings of the Workshop on Radio Continua during Solar Flares, held at Duino (Trieste), Italy, 27–31 May, 1985.     

Some remarks on the estimation of geothermal topocorrections

Summary The paper deals with some problems connected with the evaluation of the temperature gradient topocorrections for the purposes of the Earth's heat flow measurements. Some errors, occurring in the routine use of the method, suggested by Jeffreys and Bullard (JB method), are discussed. An example of simple topographic features is used to compare this method with the results obtained by a numerical solution of the heat conduction equation (NS method) by means of the finite difference method. The calculations have shown that the NS method is more precise, but its results are very sensitive to the approximation of the surface used. A stepwise approximation of the surface used in a 3-D model of a real mountainous region causes artificial oscillations of the surface values of the topocorrections, and the accuracy of the obtained results is comparable with that of the JB method. Thus, we are faced with the problem of a more appropriate approximation of the relief without the mentioned negative consequences to the superficial values of the topocorrections.

---

¶rt;am n, a mnauu ua¶rt;uma mnam nu uu mn nma. u m uu, nu n mu nuu m¶rt;a, m n¶rt; u u a¶rt; (J B m¶rt;). a nu nm mnau mm m¶rt; a u u au mnn¶rt;mu (NS m¶rt;) n n am. uu naau, m NS m¶rt; m JB m¶rt;, m mam u mum annuauu nmu. B a - ¶rt;u ¶rt;mum amu nu¶rt;um mnama annuau u au nm au mnu u mm n mam aua mm JB m¶rt;a. a naa, m n unau num NS m¶rt;a a¶rt; nmu a¶rt; nuuu nmu.

     

Comparison of response of moss,lichens and attic dust to geology and atmospheric pollution from copper mine

Different sampling media (moss, lichen and attic dust) were used for monitoring the distribution of 15 elements, including certain trace elements, in the vicinity of an intensively exploited copper mine in the east of the Republic of Macedonia. Moss species (Hypnum cupressiforme and Campothecium lutescens), epiphytic lichens (Hypogymnia physodes and Evernia prunastri) and attic dust were collected for comparative analysis for monitoring air pollution. In both cases (lithological and anthropogenic affected areas) for the distribution of elements, the sampling media follows the expression capabilities: attic dust > moss > lichens. Enrichment factors M/L—moss vs. lichen, for plant response to elements distribution and D/L—attic dust vs. lichen, for historical response of elements distribution were significant for Cu and Ni, which were singled out as the main markers for anthropogenic and geogenic distribution. The factor analysis highlighted geogenic (F1: Ni-Cr-Cd-Fe-Al-K-Mn-Zn) and anthropogenic (F2: As-Cu-Pb) association of elements from three types of media samples. For anthropogenic affected areas, T value and F value for Cu content were significant at p < 0.05 and higher enrichment factors were obtained for lichen, moss and attic dust media (3.8, 5.0 and 5.7, respectively). Spatial distribution for element deposition (with emphasis on Cu and Ni) is not disturbed by the significant differences in the sampling media matrix. Treated sample materials (attic dust, moss, lichen) are shown to be useful in determining an anthropogenic impact, as well as the chemical properties or geological background on orographic diverse terrain in the presence of complex geological structure.     

Integral transformations of gradiometric data onto a GRACE type of observable

Integral transformations of gravitational gradients onto a Gravity Recovery And Climate Experiment (GRACE) type of observable are derived in this article. The gravitational gradients represent components of the gravitational tensor in the local north-oriented frame. The GRACE type of observable corresponds to a difference between two gravitational vectors as projected onto the line of sight between the two GRACE satellites. In total, three integral transformations relating vertical–vertical, vertical–horizontal and horizontal–horizontal gravitational gradients with the GRACE type of observable are provided. Spectral and closed forms of corresponding isotropic kernels are derived for each transformation. Special cases show that the integral transformations are general and relate gravitational gradients to many other quantities of the gravitational field, such as the gravitational vector, and its radial and tangential components. Correctness of the mathematical derivations is validated in a closed-loop simulation using synthetic data.