High‐resolution reconstruction of a coastal barrier system: impact of Holocene sea‐level change

This study presents a detailed reconstruction of the sedimentary effects of Holocene sea‐level rise on a modern coastal barrier system. Increasing concern over the evolution of coastal barrier systems due to future accelerated rates of sea‐level rise calls for a better understanding of coastal barrier response to sea‐level changes. The complex evolution and sequence stratigraphic framework of the investigated coastal barrier system is reconstructed using facies analysis, high‐resolution optically stimulated luminescence and radiocarbon dating. During the formation of the coastal barrier system starting 8 to 7 ka rapid relative sea‐level rise outpaced sediment accumulation. Not before rates of relative sea‐level rise had decreased to ca 2 mm yr^?1 did sediment accumulation outpace sea‐level rise. From ca 5·5 ka, rates of regionally averaged sediment accumulation increased to 4·3 mm yr^?1 and the back‐barrier basin was filled in. This increase in sediment accumulation resulted from retreat of the barrier island and probably also due to formation of a tidal inlet close to the study area. Continued transgression and shoreface retreat created a distinct hiatus and wave ravinement surface in the seaward part of the coastal barrier system before the barrier shoreline stabilized between 5·0 ka and 4·5 ka. Back‐barrier shoreline erosion due to sediment starvation in the back‐barrier basin was pronounced from 4·5 to 2·5 ka but, in the last 2·5 kyr, barrier sedimentation has kept up with and outpaced sea‐level. In the last 0·4 kyr the coastal barrier system has been prograding episodically. Sediment accumulation shows considerable variation, with periods of rapid sediment deposition and periods of non‐deposition or erosion resulting in a highly punctuated sediment record. The study demonstrates how core‐based facies interpretations supported by a high‐resolution chronology and a well‐documented sea‐level history allow identification of depositional environments, erosion surfaces and hiatuses within a very homogeneous stratigraphy, and allow a detailed temporal reconstruction of a coastal barrier system in relation to sea‐level rise and sediment supply.     

Quantification of mineral matter in the Argonne Premium Coals using interactive Rietveld-based X-ray diffraction

The mineral matter in the eight reference North American coal samples of the Argonne Premium Coal series has been investigated on a quantitative basis using X-ray diffraction (XRD) techniques. X-ray diffraction data obtained from electronic low-temperature (oxygen–plasma) ash (LTA) residues, from ashes produced by heating the coals in air at 370°C, and also from the raw coals themselves, were evaluated using an interactive data processing system ( ™) based on Rietveld interpretation methods. The results from the three types of material (LTA, 370°C ash and raw coal) were compared for each sample. This allowed the components present in the raw coals in crystalline form to be recognised separately from mineral artifacts produced, particularly in the low-rank coals, from interaction of organically associated elements (Ca, S, etc.) during the two ashing processes.After the allowance for the production of any artifacts, the quantitative mineral assemblages identified from XRD of the raw coals were found to be consistent, even for coals having a relatively low ash percentage (around 5%), with the results obtained from the respective mineral concentrates prepared by the ashing methods. The effects of heating the coal to 370°C could also be distinguished, relative to the raw coal or the LTA, through changes in components such as pyrite and the clay minerals.Although some areas of uncertainty exist, particularly with magnesium in the low-rank coals, the calculated chemical compositions of the coal ash derived from the mineral mixtures identified for each coal were also found to be consistent with the results of direct chemical analysis of the respective coal ash materials.     

The agricultural utility of lithic-mulch gardens: Past and present

The mulching of agricultural fields and gardens with stones, pebbles, volcanic ash and similar lithic materials is a variant agricultural strategy uniquely suited to the constraints of a dryland environment. While the agricultural literature contains reports on limited experiments with stone or gravel mulch, data regarding the employment of lithic mulch are lacking. This paper works to bridge this gap by comparing empirical data collected from prehistoric pebble-mulch gardens in the Galisteo Basin (New Mexico) to contemporary agricultural experiments with lithic mulch. Such past-present and experimental-real world comparisons allow us to more fully address the effectiveness of lithic mulching as an agricultural strategy. It is affirmed that lithic mulch is applied to garden plots, especially during periods of drought, in order to reduce soil erosion from wind and water, increase soil temperature to extend the growing season, increase water infiltration, and reduce the evaporative loss of water from wind and sun. The cumulative effect of this soil and water conserving technique is an increase in crop biomass and crop yield.     

Linkages between spatio‐temporal patterns of environmental factors and distribution of plant assemblages across a boreal peatland complex

Here we examine the arrangement of plant species across an oligotrophic bog/poor fen peatland complex in the North American boreal plain and the relationships of these species to their physical and chemical environment. A semi‐uniform spatial sampling approach was utilized to describe the species assemblages, pore‐water chemistry and physical condition of 100 plots throughout a single peatland complex. Regardless of sharing the same ground cover of Sphagnum mosses, the remaining species separated into four distinct assemblages, each with unique indicators. These species groups along with associated chemical and physical factors are organized into four ecosites: bog, margin (edge) and two poor fen ecosites. The plant assemblages of this peatland have a complex relationship with numerous gradients, both physical and chemical, including depth to water table, shade, pH, nutrient and base cation. Rather than being homogenous across the landscape, most environmental variables exhibit distinct spatial patterns and do so in relationship to the plant assemblages, forming spatially distinct ecosites across the complex. Base cation concentrations play a smaller role than previously thought in differentiating these ecosites, and in addition to shade and depth to water table, nitrogen in the form of dissolved organic nitrogen was highly related to the placement of these ecosites. Many significant chemical factors appear related to evaporative water loss within the peatland complex, and these chemical factors are used to differentiate the ecosites. However, the mediation of evaporative water loss is due largely to self‐generated responses of the plant assemblages related to shade through plant morphology and peat acrotelm development related to depth to water table. We conclude that plant species and associated environmental gradients act together to form spatially distinct ecosites. The distribution of these ecosites within this large, environmentally complex peatland is largely controlled by differing self‐generated responses along the hydrotopographical gradient of differential water loss.     

Crustal contaminants in the Permian Oslo Rift, South Norway: constraints from Precambrian geochemistry

During the late Paleozoic Oslo rifting event, the SW part of the Baltic Shield was penetrated by mantle-derived magmas from a depleted lithospheric or sublithospheric source. Along the way to their final emplacement, these magmas may have interacted with a heterogeneous continental crust, consisting of a mosaic of continental terranes, each with its unique composition and internal crustal history. Information on radiogenic isotope ratios and trace element distributions in the Precambrian terranes surrounding the rift can be used to define characteristic crustal components. These components may be used as endmembers in petrogenetic modelling of the Oslo Rift magmatic system. Based on available data, six endmember components can be identified, and (semi) quantitatively characterized in terms of Sr, Nd and Pb isotopes and selected trace elements. Data on the distribution of rock-types along the rift flanks allow estimates to be made of the relative importance of the components in different parts of the rift. Combining these data with petrological information may allow a realistic understanding of crust–magma interaction in the Oslo Rift magmatic system.     

Lu–Hf and U–Pb isotope systematics of zircons from the Storgangen intrusion, Rogaland Intrusive Complex, SW Norway: implications for the composition and evolution of Precambrian lower crust in the Baltic Shield

The Storgangen orebody is a concordantly layered, sill-like body of ilmenite-rich norite, intruding anorthosites of the Rogaland Intrusive Complex (RIC), SW Norway. 17 zircon grains were separated from ca. 5 kg of sand-size flotation waste collected from the on-site repository from ilmenite mining. These zircons were analysed for major and trace elements by electron microprobe, and for U–Pb and Lu–Hf isotopes by laser ablation microprobe plasma source mass spectrometry. Eight of the zircons define a well-constrained (MSWD=0.37) concordant population with an age of 949±7 Ma, which is significantly older than the 920–930 Ma ages previously reported for zircon inclusions in orthopyroxene megacrysts from the RIC. The remaining zircons, interpreted as inherited grains, show a range of ²⁰⁷Pb/²⁰⁶Pb ages up to 1407±14 Ma, with an upper intercept age at ca. 1520 Ma. The concordant zircons have similar trace element patterns, and a mean initial Hf isotope composition of ¹⁷⁶Hf/¹⁷⁷Hf_{949 Ma}=0.28223±5 (_Hf=+2±2). This is similar to the Hf-isotope composition of zircons in a range of post-tectonic Sveconorwegian granites from South Norway, and slightly more radiogenic than expected for mid-Proterozoic juvenile crust. The older, inherited zircons show Lu–Hf crustal residence ages in the range 1.85–2.04 Ga. One (undated) zircon plots well within the field of Hf isotope evolution of Paleoproterozoic rocks of the Baltic Shield. These findings indicate the presence of Paleoproterozoic components in the deep crust of the Rogaland area, but do not demonstrate that such rocks, or a Sveconorwegian mantle-derived component, contributed significantly to the petrogenesis of the RIC. If the parent magma was derived from a homogeneous, lower crustal mafic granulite source, the lower crustal protolith must be at least 1.5 Ga old, and it must have an elevated Rb/Sr ratio. This component would be indistinguishable in Sr, Nd and Hf isotopes from some intermediate mixtures between Sveconorwegian mantle and Paleoprotoerzoic felsic crust, but it cannot account for the initial ¹⁴³Nd/¹⁴⁴Nd of the most primitive, late Sveconorwegian granite in the region, without the addition of mantle-derived material.     

Benthic nitrogen cycling traversing the Peruvian oxygen minimum zone

Benthic nitrogen (N) cycling was investigated at six stations along a transect traversing the Peruvian oxygen minimum zone (OMZ) at 11°S. An extensive dataset including porewater concentration profiles and in situ benthic fluxes of nitrate (NO₃⁻), nitrite (NO₂⁻) and ammonium (NH₄⁺) was used to constrain a 1-D reaction-transport model designed to simulate and interpret the measured data at each station. Simulated rates of nitrification, denitrification, anammox and dissimilatory nitrate reduction to ammonium (DNRA) by filamentous large sulfur bacteria (e.g. Beggiatoa and Thioploca) were highly variable throughout the OMZ yet clear trends were discernible. On the shelf and upper slope (80-260 m water depth) where extensive areas of bacterial mats were present, DNRA dominated total N turnover (?2.9 mmol N m⁻² d⁻¹) and accounted for ?65% of NO₃⁻ + NO₂⁻ uptake by the sediments from the bottom water. Nonetheless, these sediments did not represent a major sink for dissolved inorganic nitrogen (DIN = NO₃⁻ + NO₂⁻ + NH₄⁺) since DNRA reduces NO₃⁻ and, potentially NO₂⁻, to NH₄⁺. Consequently, the shelf and upper slope sediments were recycling sites for DIN due to relatively low rates of denitrification and high rates of ammonium release from DNRA and ammonification of organic matter. This finding contrasts with the current opinion that sediments underlying OMZs are a strong sink for DIN. Only at greater water depths (300-1000 m) did the sediments become a net sink for DIN. Here, denitrification was the major process (?2 mmol N m⁻² d⁻¹) and removed 55-73% of NO₃⁻ and NO₂⁻ taken up by the sediments, with DNRA and anammox accounting for the remaining fraction. Anammox was of minor importance on the shelf and upper slope yet contributed up to 62% to total N₂ production at the 1000 m station. The results indicate that the partitioning of oxidized N (NO₃⁻, NO₂⁻) into DNRA or denitrification is a key factor determining the role of marine sediments as DIN sinks or recycling sites. Consequently, high measured benthic uptake rates of oxidized N within OMZs do not necessarily indicate a loss of fixed N from the marine environment.     

Challenges in global ballast water management

Ballast water management is a complex issue raising the challenge of merging international regulations, ship's specific configurations along with ecological conservation. This complexity is illustrated in this paper by considering ballast water volume, discharge frequency, ship safety and operational issues aligned with regional characteristics to address ecological risk for selected routes. A re-estimation of ballast water volumes gives a global annual level of 3500 Mton. Global ballast water volume discharged into open sea originating from ballast water exchange operations is estimated to approximately 2800 Mton. Risk based decision support systems coupled to databases for different ports and invasive species characteristics and distributions can allow for differentiated treatment levels while maintaining low risk levels. On certain routes, the risk is estimated to be unacceptable and some kind of ballast water treatment or management should be applied.